SAMTEC FWJ-08-04-T-S

F-218 (Rev 18MAY18) JW–13–04–T–S–550–150 FWJ–08–01–T–S FWJ–05–02–T–S–RA (3.96 mm) .156" FWJ, HFWJ, JW SERIES POWER HEADERS & BOARD STACKERS Mates with: TYPE NO. OF LEAD PLATING OTHER FHP S STRIP PINS STYLE OPTION OPTION SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?FWJ, FWJ –T www.samtec.com?HFWJ or FHP/HFWJ = Standard = Matte Tin www.samtec.com?JW CURRENT RATING Leave Header PINS (PER CONTACT) blank for Insulator Material: Through-hole FWJ = Black Glass 1 13.1 A Filled Polyester 2 11.2 A HFWJ HFWJ, JW = Natural Liquid = High Temp 3 10.3 A Crystal Polymer –RA Header Terminal Material: 4 9.2 A Specify LEAD STYLE = Right-angle Phosphor Bronze 24 6.7 A from chart below. (Style –02 & Plating: Note: Sn over 50 µ" (1.27 µm) Ni –04 only) Some lengths, styles and Operating Temp Range: E options are non-standard, -55 °C to +105 °C A C non-returnable. Voltage Rating: F (0.51) –VS 600 VAC/845 VDC .020 = Surface Mount Standard Creepage: (6.35) FWJ: (2.82 mm) .111" (2.54) Requires HFWJ .250 B .100 D HFWJ, JW: (3.92 mm) .154" (2 pins/row 01 thru 24 (1.02) .040 Standard Clearance: minimum) (2.82 mm) .111 Style –05 (1.14) .045 RoHS Compliant: (3.96) LEAD SQ TYP not available. Yes A B C D E F .156 STYLE TYP (11.43) (10.46) –01 –––––– –––––– –––––– .450 (4.45) .412 PROCESSING .175 –P (12.70) (11.73) (4.45) (8.13) (2.54) –02 .500 .462 .175 .320 .100 = Pick & Place Lead–Free Solderable: (3.18) (20.55) (3.96) (19.10) (3.96) (13.56) (4.95) .125 FWJ = Wave only Pad (3 Pos. min.) –04 .809 .156 .752 .156 .534 .195 HFWJ, JW = Yes (6.98 mm) .275" (3.81) (12.07) SMT Lead Coplanarity: –05 –––––– –––––– –––––– –––––– min. post height .150 .475 * (0.20 mm) .008" max (02-16)* (–VS only) No. of Positions x (3.96) .156 *FWJ Only (0.25 mm) .010" max (17-24)* *(.004" stencil solution may be available; contact IPG@samtec.com) RECOGNITIONS NO. OF PLATING STACK POST OTHER For complete scope of JW 04 S PINS OPTION HEIGHT HEIGHT OPTION recognitions see www.samtec.com/quality Leave FILE NO. E111594 blank for –“XXX” Through-hole –T = Stacker Height Note: CREEPAGE = Matte Tin (in inches) (0.13 mm) .005" increments This Series is AND CLEARANCE non-standard, Example: –250 = (6.35 mm) .250" –VS non-returnable. = Surface Mount (2 pins/row minimum) –“XXX” 02 thru 24 = Post Height (in inches) (3.96) Selectively loading –P .156 contacts achieves customer TYP = Pick & specific creepage and Place Pad POST STACK STACK clearance requirements. HEIGHT (3 Pos. min.) HEIGHT HEIGHT (0.00) (31.75) (29.21) 1.15 Contact asp@samtec.com (27.43) (6.98 mm) .000 1.25 MAX WITH 1.08 MAX .275" min. MIN MAX (0.00) .000 POST (6.35) (8.89) .350 .250 MIN post height (3.18) MIN (–VS only) .125 (2.29) .090 (1.14) .045 SQ Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.