SAMTEC HTSS-110-01-L-D

F-218 (Rev 25JUN18) ZSS–113–03–L–D–0735 HTSS–125–01–L–DV (2.54 mm) .100" TSS, HTSS, ZSS SERIES SHROUDED .025" SQ POST HEADERS Mates with: NO. PINS LEAD PLATING ROW SSW, SSQ, ESW, ESQ, TYPE 1 SSM, BCS PER ROW STYLE OPTION OPTION STRIP SPECIFICATIONS Specify –F –D For complete specifications 03 LEAD see www.samtec.com?TSS, = Gold flash on post, = Double Row (TSS only) TSS www.samtec.com?HTSS or STYLE Matte Tin on tail Through-hole = Connector Strip www.samtec.com?ZSS (Not available on -DV) (lead style –01, 05, 07, 08, 10, from –02 & –03 only) Insulator Material: chart. 12, 13, 15, 17, HTSS TSS, ZSS: Black Glass –L Filled Polyester = High Temp 20, 25, 32, 36 = 10 µ" (0.25 µm) –DV HTSS: Natural PCT Connector Strip (Standard sizes) Gold on post, = Double Row Insulation Resistance: 5000 MΩ min Matte Tin on tail Surface Mount (2.54) .100 x No. of Positions + (3.81) .150 Terminal Material: (lead style (2.54) .100 x No. of Positions + (1.27) .050 Phosphor Bronze –01 only) LEAD T/H –T Plating: Au or Sn over STYLE (A) (HTSS only) 50 µ" (1.27 µm) Ni = Matte Tin (2.92) (2.54) 02 Operating Temp Range: –01 .115 .100 -55 °C to +125 °C with Gold –D–RA RIGHT (4.19) (9.27) LEAD -55 °C to +105 °C with Tin –02 ANGLE = Double Row .165 .365 STYLE Flammability Rating: (B) Right-angle (14.35) UL 94V-O –03 (3.30) .130 .565 –04 (lead style –04 Withstanding Voltage: (2.54) .100 –05 (5.84) .230 & –05 only) 1000 VRMS B RoHS Compliant: Yes (6.35) (8.89) (10.16) .250 PROCESSING (0.51) .350 .400 .020 Lead–Free Solderable: A HTSS: Yes (11.18) .440 (0.38) TSS, ZSS: Wave Only .015 (0.64) .025 SQ TYP –DV SMT Lead Coplanarity: –D –D–RA (HTSS ONLY) (0.15 mm) .006" max* *(.004" stencil solution may be available; contact IPG@samtec.com) RECOGNITIONS NO. PINS PLATING BODY LEAD 1 For complete scope of ZSS D PER ROW OPTION HEIGHT STYLE recognitions see www.samtec.com/quality FILE NO. E111594 Specify –F LEAD = Gold flash on post, OTHER –“XXXX” Matte Tin on tail 03, 05, 07, 08, 10, 12, STYLE SOLUTIONS = Body Height from 13, 15, 17, 20, 25, 32, 36 • Shrouded IDC headers and chart. –L (Standard sizes) stackers to mate with IDSD = 10 µ" (0.25 µm) Series. See TST, HTST and Gold on post, LEAD C MAX BODY ZST Series. Matte Tin on tail (2.54) .100 x No. of Positions + (3.81) .150 STYLE (OAL) HEIGHT (2.54) .100 x No. of Positions + (1.27) .050 (2.54) (16.00) .630 (13.72) .540 –01 02 .100 –T ALSO AVAILABLE –02 (18.54) .730 (16.26) .640 = Matte Tin (MOQ Required) (9.27) (21.08) .830 (18.80) .740 –03 .365 –04 (23.62) .930 (21.34) .840 • Other sizes (2.54) –05 (26.16) 1.030 (23.88) .940 • Other platings .100 (28.70) 1.130 (26.42) 1.040 –06 • Alignment Pins –07 (31.24) 1.230 (28.96) 1.140 • Single Row (6.35) (8.89) (33.78) 1.330 (31.50) 1.240 –08 .250 BODY • Locking Leads .350 HEIGHT –09 (36.32) 1.430 (34.04) 1.340 (2.29) • Polarized C .090 (OAL) Note: For added mechanical stability, Samtec (0.38) MIN .015 recommends mechanical board spacers be used in applications with gold or selective Note: Some lengths, styles (0.64) .025 SQ TYP gold plated connectors. Contact ipg@ and options are non-standard, (2.54) .100 samtec.com for more information. non-returnable. ZSS is non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. 01 01