SAMTEC HTST-113-01-TM-D

ZST–113–03–F–D–0735 F-218 (Rev 25JUN18) HTST–125–01–L–DV (2.54 mm) .100" TST, HTST, ZST SERIES SHROUDED .025" SQ POST IDC HEADERS Mates with: NO. PINS TYPE LEAD PLATING ROW OTHER IDSD 1 PER ROW STRIP STYLE OPTION OPTION OPTION SPECIFICATIONS For complete specifications www.samtec.com?TST, Specify Surface –F –D 05, 07, 08, 10, www.samtec.com?HTST or LEAD Mount = Gold flash on post, = Double Row www.samtec.com?ZST TST 12, 13, 15, 17, (lead style STYLE Matte Tin on tail Through-hole Insulator Material: = Cable Strip –01 only) (Not available on –DV) (lead style –01, 20, 25, 32, 36 from TST, ZST: Black Glass (HTST only) –02 & –03 only) (Standard sizes) Filled Polyester chart. HTST HTST: Natural LCP –L Insulation Resistance: = High Temp –P = 10 µ" (0.25 µm) –DV 5000 MΩ min Cable Strip = Pick & Gold on post, = Double Row Terminal Material: Place Pad Matte Tin on tail Surface Mount Phosphor Bronze (2.54) .100 x No. of Positions + (7.62) .300 Plating: Au or Sn over (lead style (2.54) .100 x No. of Positions + (5.08) .200 50 µ" (1.27 µm) Ni –01 only) LEAD T/H –TR –T Current Rating (IDSD/TST): STYLE (A) (HTST only) = Tape = Matte Tin 3.4 A per pin 02 (2.92) & Reel (2 pins powered) –01 .115 Operating Temp Range: Packaging (9.27) –D–RA RIGHT- (4.19) LEAD -55 °C to +125 °C with Gold .365 –02 ANGLE = Double Row .165 STYLE -55 °C to +105 °C with Tin (B) (2.54) Right-angle (14.35) Flammability Rating: UL 94V-O –03 (2.54) .100 .565 –04 (3.30) .130 (lead style –04 Withstanding Voltage: .100 (5.84) .230 & –05 only) –05 1000 VRMS RoHS Compliant: Yes B (6.35) (8.89) (10.16) .250 PROCESSING (0.51) .350 .400 .200 Lead–Free Solderable: A HTST: Yes (11.18) .440 (0.38) TST, ZST: Wave Only .015 (0.64) .025 SQ TYP –DV –D–RA –D SMT Lead Coplanarity: (HTST ONLY) (0.10 mm) .004" max (05-15) (0.15 mm) .006" max (17-36)* *(.004" stencil solution may be available; contact IPG@samtec.com) RECOGNITIONS NO. PINS PLATING BODY LEAD 1 ZST D PER ROW OPTION HEIGHT STYLE For complete scope of recognitions see www.samtec.com/quality Specify –F FILE NO. E111594 LEAD = Gold flash on post, –“XXXX” Matte Tin on tail 05, 07, 08, 10, 12, 13, STYLE OTHER = Body Height from 15, 17, 20, 25, 32, 36 SOLUTIONS chart. –L (Standard sizes) • Shrouded board-to-board LEAD C MAX BODY = 10 µ" (0.25 µm) headers and stackers to mate STYLE (OAL) HEIGHT Gold on post, with SSW, SSQ, ESW, ESQ, –01 (16.00) .630 (13.72) .540 Matte Tin on tail (2.54) .100 x No. of Positions + (7.62) .300 SSM and BCS Series. See –02 (18.54) .730 (16.26) .640 (2.54) .100 x No. of Positions + (5.08) .200 TSS, HTSS and ZSS Series. (2.54) (21.08) .830 (18.80) .740 02 –03 –T .100 –04 (23.62) .930 (21.34) .840 = Matte Tin (9.27) ALSO AVAILABLE (26.16) 1.030 (23.88) .940 –05 .365 (MOQ Required) –06 (28.70) 1.130 (26.42) 1.040 (2.54) –07 (31.24) 1.230 (28.96) 1.140 • Other platings & sizes .100 (33.78) 1.330 (31.50) 1.240 –08 • Alignment Pins –09 (36.32) 1.430 (34.04) 1.340 • Single Row (6.35) (8.89) .250 BODY • Locking Leads .350 HEIGHT (2.29) • Polarized C .090 (OAL) (0.38) MIN Note: For added mechanical stability, Samtec .015 recommends mechanical board spacers be Note: Some lengths, styles used in applications with gold or selective and options are non-standard, (0.64) .025 SQ TYP gold plated connectors. Contact (2.54) non-returnable. ZST is .100 ipg@samtec.com for more information. non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. 01 01