SAMTEC HTSW-101-07-S-D

F-218 (Rev 10OCT17) HTSW–116–11–G–S 10 YEAR MFG WITH 30 µ" GOLD EXTENDED LIFE PRODUCT HIGH MATING CYCLES TSW–209–09–F–S–RA HTSW–115–05–L–Q (2.54 mm) .100" THROUGH-HOLE .025" SQ POST HEADER Board Mates: NO. PINS SSW, SSQ, SSM, ESW, ESQ, TYPE STRIP PIN CENTERS PER ROW BCS, BSW, CES, SLW Cable Mates: IDSD, IDSS, SMSD, SMSS .200" (5.08 mm) Centers, .100" (2.54 mm) Centers, Standard = = = – 2 –1 Every Other Position Filled TSW Strip All Positions Filled SPECIFICATIONS (2.54) (5.08) .100 .200 For complete specifications Hi-Temp = see www.samtec.com?TSW HTSW Strip or www.samtec.com?HTSW Insulator Material: TSW: Black Glass Filled Polyester HTSW: Natural Liquid Crystal Polymer Terminal Material: (2.54) .100 x No. of Positions (2.54) Phosphor Bronze .100 Straight (2.54) (2.48) Plating: – S .100 .098 Au or Sn over 50 µ" (1.27 µm) Ni Pin (2.54) 50 01 Operating Temp Range: .100 02 100 Versions -55 °C to +125 °C with Gold -55 °C to +105 °C with Tin (5.08) (2.54) (5.02) Voltage Rating: .200 .100 .198 – D 550 VAC mated with SSW; 500 VAC mated with 01 99 BCS or ESQ; 03 150 450 VAC -RA/-RE mated with BCS or SSM (2.54) .100 400 VAC mated with CES (7.62) (7.56) (5.08) .300 .200 .298 RoHS Compliant: Yes – T Lead–Free Solderable: HTSW: Yes 01 148 TSW: No, Lead Wave Only 03 150 CURRENT RATING 01 (PER PIN) (5.08) (7.56) (7.62) .300 .200 .298 TSW mated with thru – Q ESW SSW SLW SSQ SSM BCS SNT 50 01 148 5.2 A 5.7 A 5.2 A 6.3 A 5.2 A 4.6 A 4.3 A = .100" (2.54 mm) TSW HTSW Center Version 2 POSITIONS POWERED Right- (2.54) .100 x No. of Positions (2.54) .100 RECOGNITIONS Angle (3.02) (3.09) – S (1.78) (1.78) .119 .122 Versions .070 .070 For complete scope 01 of recognitions see 02 www.samtec.com/quality 100 02 50 thru (2.54) APPLICATIONS (6.10) (5.56) – D .100 .240 FILE NO. E111594 .219 25 (1.78) (1.78) TSW BCS .070 .070 = .200" (5.08 mm) 01 99 Center Version 03 150 (2.54) .100 (5.08) (8.12) (8.10) – T .200 HORIZONTAL .320 .319 (1.78) (1.78) .070 .070 01 148 ALSO AVAILABLE 03 150 (MOQ Required) • Other platings (5.08) (8.12) (8.10) – Q .200 .320 .319 Contact Samtec. (1.78) (1.78) .070 .070 Note: 01 148 TSW HTSW Some lengths, styles and options are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. TSW–109–10–F–D–RA TSW–114–16–G–S–RE HTSW–120–13–T–D TSW–112–07–G–T TSW, HTSW SERIES THROUGH-HOLE .025" SQ POST HEADER LEAD PLATING ROW OTHER OPTIONS STYLE OPTION OPTION –S –LC –F – RA or –RE = Single = Gold flash on post, Matte Tin on tail = Locking Clip = Right-angle Row (Styles –08 thru –13 & –22 only) –L –NA –D = 10 µ" (0.25 µm) Gold on post, Matte Tin on tail IDSS or IDSD = Right-angle STRIP ASSEMBLY = Double (using straight body for coplanar Row LOCKING .025" SQ CLIP mating with SSW-RA series) TERMINAL –G STRIP (TSW) PC = 10 µ" (0.25 µm) Gold on post, Gold flash on balance BOARD –T Requires 4 pin minimum = Triple (1.27) (NA with -T,-Q,-RA or -RE) –T Row .050 = Matte Tin –LA –LL –Q = –RA Option = Double = Locking Lead OTHER SOLUTIONS with –LL Option Row Two leads per strip crimped in (5.08 mm) opposite directions on or near • Elevated Right-angle option .200" centerline. See charts for available • Shunts styles. N/A with single row 1 or 2 –“XXX” row positions. Recommended hole size = Polarized Position Contact Samtec space (1.02 mm ± 0.03 mm) .040" ± .001" Straight Pin Versions Right-Angle Versions (Specify “LEAD STYLE” from chart) (Specify “LEAD STYLE” from chart and select –RA or –RE from other options) SINGLE (– S STYLE DOUBLE (– D) STYLE A B C A B C –RA LEAD TRIPLE (–T & – Q) –RE LEAD SINGLE C STYLE STYLE A C A (3.30) (8.51) (2.67) (23.62) (18.29) A A – 05 –18 .130 .335 .105 .930 .720 (2.29) (2.29) (2.29) (4.83) * * – 08 – 09 (26.16) (20.83) (2.41) (7.62) (2.67) .090 .090 .090 .190 –19 – 06 (2.79) 1.030 .820 .095 .300 .105 (7.37) * * (7.37) (7.37) (7.37) .110 – 09 –10 (31.24) (25.91) (2.54) (10.92) .290 .290 .290 .290 – 20 – 07 1.230 1.020 .100 .430 (9.91) (5.84) * * (9.91) (9.91) (9.91) –11 –10 (5.08) (13.46) (36.32) (30.99) .390 .230 .390 (5.84) .390 .390 – 21 – 08 .200 .530 1.430 1.220 .230 * * (12.45) (12.45) (12.45) (12.45) –12 (7.62) (16.00) –11 (10.16) (18.54) .490 .490 .490 .490 – 22 – 09 .300 .630 .400 .730 (5.84) (17.53) * (14.99) (14.99) (14.99) –13 (11.30) .230 –12 (12.70) (21.08) (5.84) .690 .590 .590 .590 – 23 –10 .445 .500 .830 .230 (2.92) (2.54) (8.13) * (20.07) (20.07) N/A –16 .115 (12.15) (6.73) –13 (15.24) (23.62) .100 .320 .790 .790 – 24 –11 .480 .265 .600 .930 (22.61) * (5.08) (8.13) (5.08) (5.08) – 21 (5.33) (16.00) (8.13) –16 (17.78) (26.16) .890 .200 .320 .200 .200 – 25 –12 .210 .630 .320 * .700 1.030 * (2.29) (25.15) N/A N/A – 22 (3.20) (11.58) – 21 (22.86) (31.24) .090 ▲ .990 (5.84) (5.84) – 26 –13 .126 .456 .900 1.230 .230 (20.07) .230 (4.83) (4.83) (4.83) – 27 (25.40) (33.78) (5.84) – 22 (13.46) (8.13) .790 .190 .190 .190 – 27 –14 1.000 1.330 .230 * (2.79) .530 .320 (14.99) (2.54) (8.13) (2.54) (2.54) – 25 – 28 .110 (20.32) (28.70) (13.21) .590 .100 .320 .100 .100 –15 – 28 .800 1.130 * (18.54) .520 (22.61) * – 27 N/A (7.87) .730 (8.13) (23.11) (33.78) .890 *Available with –LA (5.84) –16 – 29 .310 .320 .910 1.330 (8.13) (17.53) .230 (17.53) * (Locking Lead) Option – 28 (18.03) (28.70) .320 (2.79) (21.08) (15.74) .690 .690 – 30 –17 .710 1.130 N/A .110 .830 .620 * (20.32) – 29 N/A (0.89) (9.27) (5.84) .800 (8.13) – 41 * Available with –LL + .035 .365 .230 .320 (15.24) (15.24) – 30 (Locking Lead) Option (1.27) (11.94) (8.13) .600 .600 – 42 + .050 .470 .320 (0.64) .025 SQ Post + Style –41 & –42 available (1.78) with HTSW only. .070 C C ▲ C Except: Style –26 A A (0.46) .018 DIA Tail B (2.54) (2.54) .100 LEAD .100 B STYLE B (2.54) A (1.52) – RA .100 .060 (2.54) (0.64) .025 SQ Tail ▲ (4.06) – RE .100 .160 Specify -07 for best mate with IDXX Series IDC Cable Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.