SAMTEC HW-07-11-TS-620-SM

F-218 (Rev 10OCT17) HW–15–08–G–S–335–SM HW–25–15–L–D–474–SM–A (2.54 mm) .100" HW-SM SERIES FLEXIBLE .025" SQ BOARD STACKERS Board Mates: NO. PINS LEAD PLATING ROW STACKER OTHER SSW, SSQ, ESW, ESQ, SM HW CES, SLW, BSW, BCS, PER ROW STYLE OPTION OPTION HEIGHT OPTIONS SSM, HLE, PHF Cable Mates: IDSS, IDSD, SMSD, SMSS – S –“XXX” = Single = Stacker Row Height SPECIFICATIONS 02 thru 36 For complete specifications and recommended PCB layouts – D see www.samtec.com?HW-SM = Double Row Insulator Material: STACKER Top: Natural LCP (2.54) .100 x HEIGHT 36 No. of Positions Bottom: Black LCP (6.35) .250 Terminal Material: MIN (4.70) (2.54) Phosphor Bronze .185 .100 Plating: Au or Sn over 01 50 µ" (1.27 µm) Ni Operating Temp Range: 02 72 -55 °C to +125 °C with Gold -55 °C to +105 °C with Tin RoHS Compliant: (7.37) (2.54) Yes .290 .100 –‘‘XXX’’ PROCESSING (5.08) 01 71 = Polarized .200 Lead–Free Solderable: (0.64) .025 Specify omitted pin position Yes SQ TYP SMT Lead Coplanarity: (0.15 mm) .006" max* (2.54) *(.004" stencil solution –A .100 may be available; contact = Alignment Pin IPG@samtec.com) (2.54) RECOGNITIONS .100 For complete scope (1.27) .050 of recognitions see (2.54) www.samtec.com/quality .100 –S –D (Metal or plastic at Samtec discretion) FILE NO. E111594 –TR ALSO AVAILABLE = Tape & Reel Packaging (MOQ Required) Specify LEAD STYLE (4–27 pins per row only) (Not Available on Lead Styles 10, 11, 12 & 20) from chart • Other platings • Locking Clip (Manual placement LEAD required) available with OAL STYLE (SMT) double row –SM (11.81) –F Contact Samtec. – 08 POST .465 = Gold flash on contact, Matte Tin on tail (0.00).000 (16.89) – 09 MIN .665 (19.43) –10 –L .765 OVERALL (21.97) = 10 µ" (0.25 µm) Gold on contact area of longer tail, Matte Tin on tail –11 LENGTH .865 STACKER (24.51) Notes: (OAL) –12 HEIGHT .965 For added mechanical –G (14.35) stability, Samtec recommends –15 = 10 µ" (0.25 µm) Gold on contact area of longer tail, Gold flash on balance .565 mechanical board spacers be (9.65) used in applications with gold or –16 .380 selective gold plated connectors. (10.54) –T Contact ipg@samtec.com for –17 .415 = Matte Tin more information. (27.05) –20 1.065 This Series is non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.