SAMTEC IP5-08-05.0-L-D-1-TR

RF-18 IP5–04–01–L–S–RA1–TR IP5–08–05.0–L–S–1–TR IP5–04–05.0–L–S–1–TR (4.00 mm) .1575" IP5, IP5-RA SERIES 50 W HIGH ISOLATION RF PLUGS SPECIFICA SPECIFICATIONS TIONS PLUGS ROW PLATING 05.0 TAIL OPTION TR IP5 PER ROW OPTION For complete specifications and recommended PCB layouts see www.samtec.com?IP5 Shell Material: Mates with: Copper Alloy –1 –TR –S –L IJ5, IJ5C Insulator Material: = (1.60 mm) = Tape = Single Row = Cable Black LCP –L –01, .062" & Reel Latch Contact Material: = 10 µ" (0.25 µm) board (Single Copper Alloy –02, –04, –D Gold on contact area, thickness Dielectric Material: Row only) = Double Row Matte Tin on tail –06, –08 Black LCP (Not available Plating: NO. OF with –01) Au or Sn over A PLUGS 50 µ" (1.27 µm) Ni A IP5/IJ5 (8.33) Current Rating (Vertical): Frequency –01 10 mm Stack Height .328 Signals: 2.36 A per pin (12.32) (2 adjacent pins powered) Insertion Loss = 3 dB 10.5 GHz / 21.0 Gbps –02 .485 Grounds: 4.4 A per pin Return Loss = 15 dB 5.5 GHz / 11.0 Gbps (8.53) (12.52) (2 adjacent pins powered) (20.32) –04 .336 .493 .800 Operating Temp Range: Isolation = 60 dB 8.8 GHz / 17.6 Gbps -55 °C to +125 °C (28.32) Isolation = 70 dB 7.6 GHz / 15.2 Gbps –06 1.115 Dielectric Withstanding (4.00) .1575 Voltage: Isolation = 80 dB 1.3 GHz / 2.6 Gbps (36.32) –08 (1.52) .060 IP5 = 600 VAC 1.430 Complete test data available IP5-RA = 190 VAC at www.samtec.com?IP5 Working Voltage: or contact sig@samtec.com IP5 = 200 VAC (9.09) IP5-RA = 190 VAC .358 RoHS Compliant: Yes (1.52) .060 PROCESSING (4.00).1575 –S –D Lead–Free Solderable: Yes RECOGNITIONS PLUGS TAIL PLATING OPTION IP5 01 S TR For complete scope PER ROW OPTION of recognitions see www.samtec.com/quality Mates with: (Leave blank FILE NO. E111594 –RA1 –TR IJ5, IJ5C for no Cable = (1.60 mm) = Tape –02, –04, –L Latch) .062" & Reel = 10 µ" (0.25 µm) –06, –08 ALSO AVAILABLE board Gold on contact area, –L (MOQ Required) thickness Matte Tin on grounds, = Cable Latch tails & weld tabs A • Other stack heights • Other PCB thicknesses NO. OF PLUGS A B C Contact Samtec. APPLICATION –02 (15.64) .616 (13.27) .523 (12.32) .485 (23.64) .931 (21.27) .838 (20.32) .800 –04 –06 (31.64) 1.246 (29.27) 1.153 (28.32) 1.115 IJ5 –08 (39.64) 1.561 (37.27) 1.468 (36.32) 1.430 C (14.72) .580 (4.00) .1575 (12.52) .493 10 mm (8.92) .351 (1.52) .060 IP5 (8.34) (0.64) .025 B .328 (4.76) .188 –RA1 SHOWN (9.72) .383 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.