F-218 (Rev 03MAY18) IPBT–105–H2–T–D–K IPBT–108–H1–T–D–RA–K IPBT–105–H1–T–D–GP (4.19 mm) .165" IPBT SERIES ISOLATED TERMINAL POWER HEADER Latching mechanism for mating with Keyed Board Mates: IPBD Series polarization SPECIFICATIONS IPBS For complete specifications Cable Mates: see www.samtec.com?IPBT PMSD, PMSS Insulator Material: Black Liquid Crystal Polymer Contact Material: High Copper Alloy Plating: Sn over 50 µ" (1.27 µm) Ni CREEPAGE Operating Temp Range: AND CLEARANCE -55 °C to +105 °C Voltage Rating: 400 VAC/565 VDC Standard Creepage: (3.66 mm) .144" (-S) (3.63 mm) .143" (-D) Standard Clearance: (3.05 mm) .120" RoHS Compliant: Yes Selectively loading Lead–Free Solderable: Yes contacts achieves customer • Individually specific creepage and Individually IPBT/IPBS shrouded contacts clearance requirements. shrouded pins CURRENT • Polarized guide PINS Contact asp@samtec.com RATING post hole option POWERED (PER CONTACT) 2 10.3 A 4 8.4 A 6 7.6 A LEAD PLATING ROW NO. OF POSITIONS OPTION 1 IPBT 8 7.1 A STYLE OPTION OPTION PER ROW 30 6.0 A RECOGNITIONS –H1 –T –S = Through-hole = Matte = Single For complete scope –RA 02, 03, 04, 05, 08, 10, 15 Tin Row of recognitions see = Right-angle (–D only) www.samtec.com/quality –H2 (Lead Style = Surface Mount –D –H1 only) 02, 03, 04, 05, 08, 10 = Double FILE NO. E111594 (–S only) Row –GP = Guide (Standard sizes) APPLICATION Post Holes (Not available IPBS with –K) (10.29) (9.65) (3.30) .405 .380 .130 –K MATED HEIGHT = Keyed IPBT Polarization –H1–D (1.14) .045 SQ –H1–S (not available with -GP (11.43) option, is No. of Positions x (4.19) .165 + (1.33) .052 .450 required IPBT/IPBS MATED 01 15 02 callout if -GP LEAD STYLE HEIGHT* (11.40) (6.58) not called out) .449 (9.60) H1/–01 (15.25) .600 .259 (1.27) (15.62) .378 16 .050 .615 –H2/–02 (16.84) .663 (4.19) –H2–S *Processing conditions 30 .165 will affect mated height. –H2–D No. of Positions x (4.19) .165 + (12.27) .483 (5.51) No. of Positions x (4.19) .165 + (6.10) .240 .217 ALSO AVAILABLE (3.73) .147 (3.73) .147 01 (MOQ Required) 15 02 (6.58) • Other sizes (10.77) .259 (1.52) .424 • Other lead styles 16 .060 (5.21) (1.52) (3.43) –H1–S–RA 30 .205 .060 .135 DIA Note: (4.06) .160 –H1–D–RA Some lengths, styles and –GP OPTION options are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.