F-218 (Rev 10OCT17) IPL1–106–01–L–D–RE1–K IPL1–110–02–L–S–K–TR IPL1–105–02–L–D–K–TR IPL1–120–01–L–D–RA–K (2.54 mm) .100" IPL1 SERIES DISCRETE WIRE HEADER Mates with Mates with: discrete wire cable SPECIFICATIONS MMSD, MMSS, assemblies Keyed For complete specifications MMSDT, MMSST polarization www.samtec.com?IPL1 Insulator Material: Natural LCP Terminal Material: Phosphor Bronze Align & Plating: Latch™ Sn or Au over 50 µ" (1.27 µm) Ni Operating Temp Range: -55 °C to +125 °C Voltage Rating: –RE1 APPLICATION 675 VAC/954 VDC RoHS Compliant: Yes MMSD PROCESSING Lead–Free Solderable: Yes Surface mount, right-angle, (2.54 mm) IPL1-RE1 –S & –D (–02 Lead Style) right-angle elevated .100" pitch SMT Lead Coplanarity: and vertical through-hole (0.10 mm) .004" max (02-05) (0.13 mm) .005" max (06-10)* (0.15 mm) .006" max (11-25)* *(.004" stencil solution may be available; contact IPG@samtec.com) NO. PINS LEAD PLATING ROW TAIL –SH SMT Lead Coplanarity: OPTION IPL1 1 K (0.15 mm) .006" max (02-25)* PER ROW STYLE OPTION OPTION OPTION *(.004" stencil solution may be available; contact IPG@samtec.com) –L –TR RECOGNITIONS = 10 µ" = Tape & –S –RA 02, 03, 04, 05, For complete scope of –01 (0.25 µm) –K Reel = Single Row =Right-angle recognitions see 06, 08, 10, 12, = Through-hole Gold on =Keyed (–02 lead (–01 lead www.samtec.com/quality contact, Polarization style only) style only) 15, 16, 20, 25 –SH Matte Tin Comes –02 (Standard sizes) = Single Row on tail with = Surface Mount FILE NO. E111594 Horizontal –RE1 Polyimide (–02 lead =Right-angle –01. –02 & –RA = Pick & style only) Elevated No. of positions x (8.76) Place Pad (2.54) .100 + (1.52) .060 (–01 lead .345 –SH & –RE1 = style only) –D No. of positions x (–K is a = Double Row (2.54) .100 + (4.06) .160 (7.04) required 01 .277 callout) –02–S (6.86) (5.08) (6.10) .270 .240 .200 (9.58) .377 (5.46) (2.54) 02 .215 .100 ALSO AVAILABLE (2.03) 01 02 .080 (8.76) (MOQ Required) (2.54) .345 .100 (3.05) • Other sizes .120 (6.35) (2.16) • With or without plug .250 –01–D –01–S .085 –02–D polarization –01–S–RE1 • Guide post holes (1.02) .040 (8.26) (5.59) (2.16) • Other platings .325 .220 (2.54) .100 .085 • Weld tab Contact Samtec. (7.62) (8.13) (1.52) (2.03) .300 .320 .060 (2.54) .080 .100 (5.44) Note: (0.64) .025 SQ .214 –01–S-RA Some lengths, styles and –02 –01 options are non-standard, –RA –01–D–RA –01–D–RE1 –02–SH non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.