F-218 MPS–06–01–01–L–RA–SD MPT–04–01–01–L–RA–SD (5.00 mm) .1969" MPT-RA, MPS-RA SERIES RIGHT-ANGLE 30 A POWER CONNECTORS MPT-RA Mates with: POWER TAIL PLATING MPS, MPSS MPT 01 RA SD PINS LENGTH OPTION MPS-RA Mates with: MPT SPECIFICATIONS –01 = Use with For complete specifications –02, –04, –06, –08 (1.60 mm) .062" –L see www.samtec.com?MPT Thick PCB = 10 µ" (0.25 µm) Gold on contact, or www.samtec.com?MPS Matte Tin on tail Insulator Material: (3.56) –03 Black LCP .140 Terminal Material: No. of positions x (5.00) .1969 + (6.28) .247 = Use with –T DIA Copper Alloy (2.36 mm) .093" = Matte Tin Plating: Thick PCB Sn or Au over (12.27) (14.81) 50 µ" (1.27 µm) Ni .483 .583 Operating Temp Range: -55 °C to +105 °C with Tin; -55 °C to +125 °C with Gold Voltage Rating: CREEPAGE 575 VAC/812 VDC No. of positions x (5.00) .1969 + (7.55) .297 (2.72) Standard Creepage: .107 AND CLEARANCE (3.25) (2.86 mm) .113" .128 Standard Clearance: (12.45) (2.54) (2.71 mm) .106" .490 .100 RoHS Compliant: Yes Lead–Free Solderable: Yes (1.88) (0.41) (5.00) (6.28) .074 .016 .1969 .247 Selectively loading MPT-RA/MPS-RA TYP (–SD SHOWN) contacts achieves customer POWER CURRENT RATING specific creepage and PINS (PER CONTACT) clearance requirements. 1 23.3 A Contact asp@samtec.com • Screw downs 2 20.5 A 3 19.4 A 4 18.4 A POWER TAIL PLATING 8 17.2 A MPS 01 RA SD PINS LENGTH OPTION –L PLATING RECOGNITIONS –01 = Use with For complete scope of –02, –04, –06, –08 (1.60 mm) .062" –L recognitions see Thick PCB = 10 µ" (0.25 µm) Gold on contact, www.samtec.com/quality Matte Tin on tail No. of positions x (5.00) .1969 + (12.63) .497 –03 = Use with –T No. of positions x FILE NO. E111594 (5.00) .1969 + (6.28) .247 (2.36 mm) .093" = Matte Tin Thick PCB OTHER (14.17) SOLUTIONS .558 (3.56) (2.50) .140 .098 • Power/Signal combination DIA headers & sockets ALSO AVAILABLE (see MPTC or MPSC Series) (MOQ Required) (8.81) • High Power Headers .347 (see PET Series) • Other sizes • High Power Sockets • Locking Clip (10.16) (2.72) (see PES Series) .400 (Manual placement required) .107 • Vertical Contact Samtec. (see MPT or MPS Series) (5.00) (2.39) .1969 (1.88) (2.54) (0.41) .094 TYP .016 .074 .100 Note: Some sizes, styles (–SD SHOWN) and options are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.