F-218 (Rev 12DEC17) MPTC–01–80–01–01–01–L–RA–SD MPSC–01–24–01–01–01–L–RA–SD (5.00 mm) .197"(PWR) (2.00 mm) .079"(SIG) MPTC-RA, MPSC-RA SERIES 30 A RIGHT-ANGLE SIGNAL/POWER COMBO MPTC-RA Mates with: PWR SIG PWR TAIL PLATING OTHER MPSC, MPCC MPTC 01 RA PINS PINS PINS LENGTH OPTION OPTION MPSC-RA Mates with: MPTC –SD or SPECIFICATIONS –01 –LC is a = Use with –L For complete specifications see –01, –02 –24 –01, –02 required (1.60 mm) = 10 µ" (0.25 µm) www.samtec.com?MPTC or = Power Pins = Total = Power Pins callout www.samtec.com?MPSC .062" Gold on contact, Per End Signal Pins Per End Thick PCB Matte Tin on tail Insulator Material: –SD Note: Available standard (Power & Signal) Black LCP –80 = Screw power pin combinations: Terminal/Contact Material: –03 = Total MPTC-01-XX-01 or Down Signal: Phosphor Bronze = Use with –T Signal Pins MPTC-02-XX-02. Power: Copper Alloy (2.36 mm) = Matte Tin on contacts Contact Samtec for Plating: –LC other options. .093" and tail (Power), Sn or Au over = Locking A Thick PCB Gold on contact, 50 µ" (1.27 µm) Ni (3.56) .140 DIA Clip Matte Tin on tail (Signal) Operating Temp Range: (Manual -55 °C to +105 °C A placement Voltage Rating: POWER 24 80 required) Power: (15.70) PINS/END (12.27) SIGNAL SIGNAL .618 600 VAC/848 VDC .483 PINS PINS Signal: (35.25) (63.25) –01 450 VAC/636 VDC 1.388 2.490 CREEPAGE Standard Creepage: (45.25) (73.25) (8.18) –02 AND CLEARANCE 1.781 2.884 (2.86 mm) .113" .322 (without -LC, power) MPTC: (2.59 mm) .101" (with -LC, power) (2.72) (12.45) (2.00) .107 MPSC: (2.60 mm) .102" .490 .0787 (with -LC, power) Standard Clearance: (1.88) (0.40) (3.25) MPTC: (2.72 mm) .107" 0102 03 (2.00) .074 .016 .128 Selectively loading contacts achieves customer (0.50) .020 (without -LC, power) .0787 specific creepage and clearance requirements. (1.84 mm) .072" (with -LC, power) Contact asp@samtec.com MPSC: (2.71 mm) .106" (without -LC, power) (1.85 mm) .073" (with -LC, power) PWR SIG PWR TAIL PLATING OTHER RoHS Compliant: MPSC 01 RA PINS PINS PINS LENGTH OPTION OPTION Yes Lead–Free Solderable: Yes MPTC-RA/MPSC-RA –SD or CURRENT –01 –LC is a POWER RATING = Use with –24 –L PINS required –01, –02 –01, –02 (PER CONTACT) (1.60 mm) = Total = 10 µ" (0.25 µm) callout = Power Pins = Power Pins 1 28.8 A .062" Signal Pins Gold on contact, Per End Per End 2 24.7 A Thick PCB Matte Tin on tail –SD 3 24.1 A Note: Available standard (Power & Signal) –80 = Screw 4 22.3 A power pin combinations: –03 = Total Down MPSC-01-XX-01 or –T PLATING = Use with Signal Pins –T MPSC-02-XX-02. (2.36 mm) = Matte Tin on contacts Contact Samtec for –LC .093" and tail (Power), other options. = Locking RECOGNITIONS Thick PCB Gold on contact, A (3.56) Clip Matte Tin on tail (Signal) .140 For complete scope (Manual DIA of recognitions see placement www.samtec.com/quality required) (15.06) (11.43) .593 .450 (2.50) .098 FILE NO. E111594 A POWER (4.44) .175 PINS/END 24 SIGNAL PINS 80 SIGNAL PINS (36.52) 1.438 (64.52) 2.540 –01 (10.16) (2.72) (46.52) 1.831 (74.52) 2.934 –02 .400 .107 (2.00) .0787 Note: Some sizes, styles (1.88) 030201 (0.50) (0.41) (2.54) and options are non-standard, .074 (2.00) .0787 .016 .020 SQ .100 non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.