SAMTEC MTSW-101-22-L-S-375

F-218 (Rev 12JAN18) HMTSW–126–23–L–S–237 MTSW–117–09–G–D–383–RA (2.54 mm) .100" MODIFIED .025" SQ POST HEADERS Board Mates: TYPE NO. PINS SSW, SSQ, ESW, PIN PITCH LEAD STYLE STRIP PER ROW ESQ, BCS, BSW CES, SLW, HLE, SSM Cable Mates: IDSD, IDSS, SMSD, SMSS MTSW –1 –2 = Modified Strip = (2.54 mm) = (5.08 mm) .100" Pitch .200" Pitch Modified .025" (2.54) strips permit HMTSW (5.08) .100 .200 = Hi-Temp custom post Modified Strip heights. (0.13) (0.13) (0.13) SPECIFY “LEAD STYLE” .005 .005 .005 Samtec offers FROM CHART the greatest stacking (2.54) .100 x No. of Positions flexibility in the industry. (2.54) (2.48) – S .100 .098 The “M” stands 50 (2.54) 01 .100 for Modified. 02 100 MTSW You tell us the POST (5.08) (2.54) (5.02) post height you need Straight – D .200 .100 .198 (0.00) and we’ll deliver it. Pin .000 OVERALL 01 99 MIN LENGTH Versions 03 150 (OAL) SPECIFICATIONS (2.54) (2.54) For complete specifications .100 .100 (5.08) (7.56) (7.62) see www.samtec.com?MTSW .200 .298 – T 01 .300 or www.samtec.com?HMTSW thru Insulator Material: 01 148 MTSW: Black Glass 03 150 50 TAIL Filled Polyester (0.00).000 = (2.54 mm) HMTSW: Natural Liquid MIN .100" Crystal Polymer (5.08) (7.56) (7.62) – Q Center Terminal Material: .298 .300 .200 Phosphor Bronze Version Plating: Au or Sn over 01 148 MTSW HMTSW 50 µ" (1.27 µm) Ni LEAD STYLE OAL Operating Temp Range: -55 °C to +125 °C with Gold (7.62) .300 –06 02 -55 °C to +105 °C with Tin RoHS Compliant: (2.54) .100 x No. of Positions (10.92) .430 –07 thru Yes Right (3.02) (3.09) – S Lead–Free Solderable: (1.78) (1.78) .119 .120 (13.46) .530 .070 –08 .070 25 MTSW: No, Lead Wave Only Angle 01 HMTSW: Yes = (5.08 mm) Versions (18.54) .730 –09 100 .200" 02 Center RECOGNITIONS (21.08) .830 –10 50 HMTSW Version (2.54) (6.10) (5.56) .100 – D –S & –D .240 For complete scope .219 (23.62) .930 –11 (1.78) (1.78) = 36 of recognitions see .070 .070 positions www.samtec.com/quality 01 99 (26.16) 1.030 –12 maximum 03 150 (31.24) 1.230 –13 (2.54) FILE NO. E111594 .100 (5.08) (36.32) 1.430 –21 (8.12) (8.10) .200 .320 .319 – T (16.00) .630 –22 (1.78) (1.78) .070 .070 (11.30) .445 01 148 –23 03 150 (12.19) .480 –24 (5.08) (33.78) 1.330 –27 (8.12) (8.10) .200 .320 .319 – Q (28.70) 1.130 –28 (1.78) (1.78) .070 .070 Note: 01 148 These Series are MTSW HMTSW non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. MTSW–115–09–L–S–229-RE MTSW–126–08–T–S–229–RA MTSW–108–28–G–D–920 HMTSW–110–23–L–S–237 MTSW, HMTSW SERIES MODIFIED .025" SQ POST HEADERS ROW POST OTHER POLARIZED PLATING OPTION OPTION HEIGHT OPTION OPTION –F –S –“XXX” = Gold flash on post, Matte Tin on tail = Single = Polarized (Specify ‘XXX’ as position number) –L –D = 10 µ" (0.25 µm) Gold on post, (4.19) = Double .165" Matte Tin on tail Contact Area –T –G = Right-angle or –RA –RE = Triple = 10 µ" (0.25 µm) Gold on post, Tail Gold flash on balance –LL – Q = Locking Lead –T = Double Row (N/A with –RE, = Matte Tin .200" (5.08 mm) N/A in single row 1 or 2 row space Two leads per strip positions. Available on crimped in opposite tails from (2.29 mm) .090" directions on or near ALSO AVAILABLE to (10.16 mm) .400" only) centerline. See TSW (MOQ Required) for availability. • Other platings –RA Option with –LL Option = –LA (Maximum “C” = (13.46 mm) .530) Contact Samtec. = “C” Dimension (Specify post height in INCHES – .005" (0.13 mm) increments) –“XXXX” (2.54) Straight Pin Versions A=OAL–C– .100 FOR A = (2.29) .090 – S – D – Q –T C C C LEAD OAL MAXIMUM MAXIMUM MAXIMUM STYLE STRAIGHT with/–RA with/–RE C C C C (7.62) (2.79) Not Not OAL OAL OAL OAL – 06 .300 .110 Available Available (10.92) (6.10) (3.30) Not (2.54) (2.54) (2.54) (2.54) – 07 .430 .240 .130 Available .100 .100 .100 .100 (13.46) (8.64) (5.84) (3.30) A A A A – 08 .530 .340 .230 .130 (18.54) (13.72) (10.92) (8.38) – 09 .730 .540 .430 .330 (21.08) (16.26) (13.46) (10.92) (5.33)Styles –21, –23, –24, –27 N/A with –D – 10 .830 .640 .530 .430 Styles –13, –21, –23, –24, –27, –28 N/A with –T or –Q Right-Angle Versions (– RA Options) A=OAL–C– .210 (23.62) (18.80) (16.00) (13.46) – 11 (1.78) (1.78) (1.78) .930 .740 .630 .530 (1.78) .070 .070 .070 .070 (26.16) (21.34) (18.54) (16.00) – 12 1.030 .840 .730 .630 C C C C (31.24) (26.42) (23.62) (21.08) A A A A – 13 1.230 1.040 .930 .830 (1.52) (1.52) (1.52) (1.52) * .060 .060 .060 (2.54) .060 (2.54) (2.54) (2.54) (36.32) (31.50) (28.70) (26.16) – 21 .100 .100 .100 .100 1.430 1.240 1.130 1.030 * (16.00) (11.18) (8.38) (5.84) (2.54) (2.54) – 22 .630 .440 .330 .230 .100 .100 (5.08) (11.30) (6.48) (3.68) (2.54) .200 – 23 .445 .255 .145 .100 Not * Available (12.19) (7.37) (4.57) – 24 .480 .290 .180 * (1.78) (33.78) (28.96) (26.16) (23.62) .070 – 27 1.330 1.140 1.030 .930 Right-Angle Versions * (28.70) (23.88) (21.08) (18.54) – 28 C 1.130 .940 .830 .730 * (– RE Options) Single Row Only * Styles –21, –23, –24, –27 A not available with –D Right-angle (2.54) (7.87) .100 Styles –13, –21, –23, –24, –27, –28 A=OAL–C– .310 (4.06) not available with –T or –Q Right-angle .160 Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.