SAMTEC SEAM-30-03.5-S-10-1-A-K-TR

F-218 (Rev 16MAR18) SEAM–20–02.0–S–10–2–A–K–TR SEAM–30–02.0–S–08–2–A–K–TR SEAM–30–03.5–S–04–2–A–K–TR (1.27 mm) .050" SEAM SERIES HIGH-SPEED/HIGH-DENSITY OPEN-PIN-FIELD Up to 500 Pins Mates with: 10 YEAR MFG SPECIFICATIONS WITH 30 µ" GOLD SEAF, SEAFP (1.12 mm) EXTENDED LIFE .044" For complete specifications and Standoffs: PRODUCT NOMINAL recommended PCB layouts see JSO WIPE HIGH MATING www.samtec.com?SEAM CYCLES Insulator Material: Black LCP Contact Material: Copper Alloy Operating Temp Range: -55 °C to +125 °C Current Rating (7 mm stack height): Low 2.7 A per pin insertion/ Solder (10 adjacent pins powered) extraction Plating: charges forces Au or Sn over 50 µ" (1.27 µm) Ni Working Voltage: HIGH-SPEED CHANNEL PERFORMANCE 240 VAC RoHS Compliant: Yes SEAF/SEAM @ 10 mm Mated Stack Height Lead-Free Solderable: Rating based on Samtec reference channel. Yes For full SI performance data visit Samtec.com OTHER SOLUTIONS or contact SIG@samtec.com RECOGNITIONS • Up to 560 pins For complete scope of recognitions see www.samtec.com/quality NO. PINS LEAD PLATING NO. OF SOLDER SEAM A K TR PER ROW STYLE OPTION ROWS TYPE FILE NO. E111594 STANDARDS Specify –L –A LEAD = 10 µ" = Alignment Pins • VITA 47 –1 –04 (0.25 µm) –10, –15, –20, (Required. Arrays STYLE • VITA 57.1 FMC = Tin/Lead Alloy =Four Rows Gold on will not self-center from –30, –40, –50 Solder Charge • VITA 57.4 FMC+ (–06.5 not contact area, on solder pads) (–10 only available in 04 row) chart available) • VITA 74 VNX Matte Tin on (-15 is only available in 4 Row –2 solder tail –K with -02.0 lead style and 10 = Lead-Free PROTOCOLS –05 = Polyimide film row with any lead style) Solder Charge =Five Rows –S Pick & Place Pad • 100 GbE (–06.5 not = 30 µ" NO. OF available) • Fibre Channel (0.76 µm) B –TR ROWS Gold on • Rapid I/O =Tape & Reel (7.06) .278 –04 contact area, –06 ® • PCI Express –05, –06 (9.60) .378 Matte Tin on =Six Rows • SATA –08 (12.14) .478 solder tail (–06.5 not ™ • InfiniBand available) –10 (14.68) .578 01 POWER/SIGNAL MATED HEIGHTS –08 SEAM SEAF LEAD STYLE APPLICATION =Eight Rows (1.27) LEAD –05.0 –06.0 –06.5 –07.5 .050 STYLE B 7 mm 8 mm 8.5 mm 9.5 mm –02.0 –10 =Ten Rows –03.0 8 mm 9 mm 9.5 mm 10.5 mm –03.5 8.5 mm 9.5 mm 10 mm 11 mm 11.5 mm 12.5 mm 13 mm 14 mm –06.5 08 LEAD A –07.0 12 mm 13 mm 13.5 mm 14.5 mm STYLE No. of positions x (1.27) .050 + (4.98) .196 (1.02) 14 mm 15 mm 15.5 mm 16.5 mm .040 –09.0 –02.0 (4.60) .181 –11.0 16 mm 17 mm 17.5 mm 18.5 mm (5.59) .220 –03.0 (1.02) (1.27) Notes: –03.5 (6.10) .240 .050 .040 A Patented (9.14) .360 –06.5 Compatible with IPC-A-610F and (0.86) (1.12) UMPT/UMPS for flexible IPC J-STD-001F Class 3 –07.0 (9.60) .378 (1.27) .034 .044 (0.10) solder joint. two-piece power/signal solutions .050 DIA DIA .004 –09.0 (11.60) .457 Some sizes, styles and No. of positions x (1.27) .050 + (3.58) .141 (13.60) .535 –11.0 options are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.