F-218 ™ TIGER TCMD–08–D–02.50–01–R EYE TCMD–20–D–02.50–01 (2.00 mm) .0787" TCMD SERIES HIGH-RELIABILITY IDC HEADER CABLE Mates with: TYPE NO. PINS END OVERALL TRANSFER OTHER SMM*, MMS*, ESQT, 01 STRIP PER ROW OPTION LENGTH OPTION OPTION PTF, SQT, SQW, TLE SPECIFICATIONS For complete specifications Leave blank for –S and –D see www.samtec.com?TCMD End Options. For –T End Insulator Material: Option Specify “–N” –“XX.XX” –04, –05, Black Glass Filled Polyester (Socket has notch polarization) = Assembled Length Terminal: –06, –07, Phosphor Bronze Assembled Length Plating: in INCHES (±1/8") –08, –10, –12, Au or Sn over 2 inches minimum 50 μ" (1.27 μm) Ni –13, –15, –17, Wire: 28 AWG 7/36 Stranded, –20, –22, –25 Tinned, Copper with Gray PVC Insulator (Standard sizes) Current Rating: 2.6 A per pin • Strain relief option (2 pins powered) Operating Temp Range: –P “XX” –SR -40 °C to +105 °C = Position Polarization = Strain Relief RoHS Compliant: = Single End = Double End –S –D 01 Yes No. of positions x (2.00) .0787 + (7.874) .3100 RECOGNITIONS 02 For complete scope of recognitions see Not available with –O, –M, www.samtec.com/quality –R, –DXX or –BXX Specify “XX” as position =Transfer End number. Requires –D “XX” –T FILE NO. E111594 Transfer End. Only = Daisy Chain Socket is polarized. 1 “XX” 2" ± 1/8" min. Double ALSO AVAILABLE Row –B “XX” (MOQ Required) Connectors = Breakout Outer • Other sizes Most Specify “XX” as number of Contact Samtec. (End of conductors to be broken out. assembly) 4" minimum 4 –R =Terminal Strip TCMD = Reversed “XX” 5"max. 2"min. 5 Breakout starts with Number 1 01 lead indicated by brown wire or red stripe. Shown on top side. 2 –M (4.00) = Middle Reverse .158 –RW = Reverse Wiring No. of positions x (2.00) .0787 + (4.00) .158 (1.00) Requires –DXX .03937 5 *Note: Standard TCMD callout –O will not mate with SMM, MMS. (5.08) .200 Must use gold plated callouts. = Outside Reverse 01 (See drawing on web.) When mated with a socket, Wire 1 mates with Pin 2; (3.05) 02 Wire 2 mates with Pin 1, etc. .120 (0.50) (2.00) (2.00) Blue or black wire .020 Note: .0787 .0787 SQ opposite position #1. Requires –DXX TCMD Series assemblies are 3 5 non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. IDC