SAMTEC TFM-115-01-S-D-RE2-WT

F-218 (Rev 10OCT17) TFM–115–02–L–S TFM–110–02–L–D–LC TFM–110–01–L–D–RE1–WT TFML–115–02–L–D–K (1.27 mm) .050" SMT & THROUGH-HOLE HEADER Shrouded body for blind mating (1.27 mm x 1.27 mm) TFM Board Mates: SPECIFICATIONS .050" x .050" SFM, SFMC micro pitch For complete specifications and TFM Cable Mates: recommended PCB layouts SFSD see www.samtec.com?TFM or www.samtec.com?TFML TFML Board Mates: APPLICATIONS Insulator Material: SFML Black Liquid Crystal Polymer Terminal Material: TFM-DH Board Mates: Phosphor Bronze SFM (-DH), SFMC Plating: Au or Sn over 50 µ" (1.27 µm) Ni TFM-DH Cable Mates: Current Rating (TFM/SFM): SFSDX (-S, -D, -SR, -DR) 3.2 A per pin (2 pins powered) TFM-DH to SFM-DH SHOWN Voltage Rating: 250 VAC mated with SFM Operating Temp Range: 10 YEAR MFG -55 °C to +125 °C WITH 30 µ" GOLD RoHS Compliant: EXTENDED LIFE Yes PRODUCT HIGH MATING Surface mount or CYCLES PROCESSING through-hole tails TFM to SFM-SH SHOWN Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max (05-25) (0.15 mm) .006" max (30-50)* TYPE NO. PINS PLATING *(.004" stencil solution LEAD STYLE 1 may be available; contact STRIP PER ROW OPTION IPG@samtec.com) RECOGNITIONS Specify –L For complete scope 03, 04, 06, 08 of recognitions see = 15 µ" (0.38 µm) (TFM –01 & –02 only) LEAD STYLE TFM www.samtec.com/quality Gold on post, from chart = Standard Matte Tin on tail 05, 07, 10, 15, 20, (Call Samtec for FILE NO. E111594 E.L.P.™ plating option) 25, 30, 35, 40, 45, 50 TFML = Locking (Standard sizes) (–01 & –02 lead style only) OTHER SOLUTIONS (1.27) .050 x MATED HEIGHTS • Lower cost plating options. No. of Positions + (3.18) .125 (2.79) LEAD STYLE See TFC Series. MATED .110 HEIGHT* TFM SFM (4.45) (6.35) .250 .175 – 02 LEAD – 12 (8.13) .320 01 STYLE B C –02 LEAD SINGLE ROW (9.91) .390 – 22 (T/H) (1.14) STYLE A (See website for –DS & –WT OAL) .045 (11.81) .465 –01 (5.59) .220 (1.97) .078 (SMT) – 32 –REX = (1.27) .050 x LEAD STYLE (5.59) .220 (2.77) .109 –02 (5.72) .225 MATED –03* No. of Positions + (6.68) .263 HEIGHT* (1.27) TFM SFM –12* (7.49) .295 –11* (7.37) .290 (1.97) .078 02 (1.27) .050 (5.97) .235 .050 –01 (9.27) .365 (7.37) .290 (2.77) .109 –22* –13* DIA –A (5.97) .235 (5.72) –03 –32* (11.18) .440 –21* (9.14) .360 (1.97) .078 (SMT or TH) .225 (7.75) .305 * N/A with 07, -DH or –11 –23* (9.14) .360 (2.77) .109 -S row option –13 –01 (7.75) .305 (11.05) .435 (1.97) .078 –31* 01 (1.27) .050 (9.53) .375 * Not Available with 07 or -S row option –21 DOUBLE ROW (0.46) .018 DIA (9.53) .375 –23 (11.43) .450 –31 (1.40) *Processing conditions will .055 B A affect mated height. (2.35) (1.42) (0.64) .093 C (0.36) .014 .056 .025 Note: –LC –WT THROUGH-HOLE SURFACE MOUNT Some sizes, styles and (SMT or TH) (–01 & –02 ONLY) options are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. TFM–105–01–L–D–RA TFML–150–01–L–D–LC TFM–125–01–L–D–WT TFM–110–02–L–DH TFM–110–02–L–D–DS TFM, TFML SERIES SMT & THROUGH-HOLE HEADER Shrouded body for (1.27 mm) blind mating .050" pitch • Passes 10 Year MFG • Locking option Surface mount or • Locking clip option through-hole tails • Weld tab option Mates with SFM for Screw down • Screw down option coplanar mating Weld tab option option ROW OPTION OPTION Specify only –RA, –RE1 or –RE2 Specify only –A, –LC, –DS or –WT SMT lead styles only –S Not available with –RA, –RE1 and –RE2 Specify only –K or –P = Single Row –RA unless otherwise noted. (TFM only) = Right-angle –K (Lead style –01 only) –A = Polyimide Film Pick & Place Pad = Alignment Pin –D = Double Row –RE1 –P = Right-angle Elevated for (1.58 mm) .062" PCB –LC = Plastic Pick & Place Pad (Requires TFM lead style –01, –D row and –WT) = Locking Clip (5 positions minimum) –DH* (Manual Placement required) (Not available with = Double Horizontal 5 position with –WT) (TFM lead style –02 only) –RE2 (05 thru 50 positions only) = Right-angle Elevated for (2.36 mm) .093" PCB –DS Specify –TR last (–TR option only (Requires TFM lead style –01, –D row and –WT) = Dual Screw Down for available) (1.60 mm) .062" PCB –TR (05, 07, 10, 15, 20, 25, 30, = Tape & Reel 35, 40 positions only) (Not available with –DS) (TFM lead styles –01 and –02 only) (Requires –D row option) (Mates with SFM–DS option and SFSD/SFSDT –SS and –DS option only) (Not available with –A, –LC, (1.91) –WT, –K, –P, –TR) (0.76) .075 .030 (0.51) (2.26) (1.27) .020 .089 –WT .050 –RA = Weld Tab –DH* ALSO AVAILABLE (TFM lead styles –01 and –02 only) (MOQ Required) (Required callout for –RE1 & –RE2) (Mates to SFSS/SFSD –SR and • Solder nail option –DR option only) (6.48) • Other sizes (05, 07, 10, 15, 20, 25, 30, 35, .255 • Other platings (1.99) 40, 45, 50 positions only) .079 Contact Samtec. (3.81) * Notes: .150 TFM –DH Mates only with SFM–D–A –DS –RE1 & –RE2 Weld tab is standard on –DH option. (–D, –01 & –02 ONLY) No need to specify –WT. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.