SAMTEC TW-17-11-S-S-120

F-218 (Rev 10OCT17) TW–08–09–F–T–165–100 TW–16–06–T–D–500–100 TW–20–03–L–Q–400–085 (2.00 mm) .0787" TW SERIES THROUGH-HOLE BOARD STACKERS Board Mates: Specify stacker SPECIFICATIONS CLT, SQT, SQW, ESQT, height in (0.13 mm) For complete specifications TLE, SMM, MMS .005" increments see www.samtec.com?TW-TH Cable Mates: Insulator Material: TCSD Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze OTHER SOLUTIONS Plating: Sn or Au over 50 µ" (1.27 µm) Ni Current Rating: 5.2 A per pin (2 pins powered) Operating Temp Range: -55 °C to +105 °C with Tin; Choice of -55 °C to +125 °C with Gold Paste In Hole (PIH) processing. RoHS Compliant: one through Yes Contact Samtec ASP Group. six rows Lead–Free Solderable: Yes ALSO AVAILABLE RECOGNITIONS (MOQ Required) (2.00 mm) .0787 pitch For complete scope • Other platings of recognitions see Contact Samtec. www.samtec.com/quality NO. PINS LEAD TAIL PLATING ROW STACKER FILE NO. E111594 TW PER ROW STYLE SPEC OPTION OPTION HEIGHT Notes: For added mechanical stability, Samtec recommends mechanical board spacers be Specify –F used in applications with gold or –S –“XXX” selective gold plated connectors. = Gold flash = Single LEAD = Stacker 02 thru 50 Contact ipg@samtec.com for –“XXX” on post, Row Height STYLE more information. = Tail Length Matte Tin on tail in inches from in inches This Series is non-standard, (0.13 mm) –D (0.13 mm) .005" non-returnable. chart .005" –L = Double increments below. increments = 10 µ" (0.25 µm) Row Example: -150 Gold on post, Other Solutions Example: –250 = (3.81 mm) Matte Tin on tail = (6.35 mm) .150" –T .250" = Triple 2 mm Shunt –T Row –“XXX” See 2SN Series. 300 = Matte Tin = Polarized LEAD 04 Position OAL –Q Surface STYLE (Specify (2.00) = Four No. of (8.20) .323 –01 Mount .0787 position to Row rows TYP (9.60) .377 –02 be removed) See previous page. x (13.60) .535 –03 (2.00) –5 .0787 (14.10) .555 –04 Low = Five (15.10) .594 –05 Profile Row 01 –S, –D*, –Q (17.10) .673 –06 See TMM Series. 295 (19.10) .751 –07 –T, –5, –6 –6 (21.10) .830 –08 * = Six (11.60) .456 Right- –09 (0.51) .020 SQ Row (15.60) .614 –10 angle POST (10.08) .397 –11 See TMM Series. (28.19) 1.110 STACKER –12 * (1.27) HEIGHT .050 * Style –08 & –12 = S & D only OAL See MIN Shrouded Chart ROW OPTION STACKER HEIGHT Double TAIL (3.05) .120 MIN –S, –D*, & –Q Row (2.00) .0787 (0.00) .000 MIN (4.06) .160 MIN –T, –5, –6 See ZLTMM Series. –S, –D*, –Q –T, –5, –6 –D with stacker height greater than (4.06 mm) .160" * will not have standoffs. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec’s specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.