SCHNEIDER ELECTRIC ABE7E16SPN22

Product data sheet ABE7E16SPN22 Characteristics connection sub-base ABE7 - for Twido extension - 16 outputs - fuses Main Range of product Advantys Telefast ABE7 Product or component Passive discrete I/O sub-base type [Us] rated supply volt- 24 V DC (sensor/controller side) age 24 V DC (controller side) Number of channels 16 Number of terminal per 2 channel Connections - terminals Screw type terminals, clamping capacity: 2 x 0.2...2 x 2.5 mm² AWG 28...16 solid Screw type terminals, clamping capacity: 2 x 0.09...2 x 0.75 mm² AWG 28...20 flexible with cable end Screw type terminals, clamping capacity: 1 x 0.14...1 x 2.5 mm² AWG 26...14 flexible without cable end Screw type terminals, clamping capacity: 1 x 0.14...1 x 2.5 mm² AWG 26...12 solid Screw type terminals, clamping capacity: 1 x 0.09...1 x 1.5 mm² AWG 28...16 flexible with cable end Connector destination Twido programmable controller Complementary Supply voltage limits 20.4...28.8 V DC (sensor/controller side) conforming to IEC 61131-2 19...30 V DC (controller side) conforming to IEC 61131-2 Discrete output number 16 Discrete output logic Source Discrete output voltage 24 V Discrete output voltage type DC Product compatibility TWDDDO16TK TWDDDO32TK Status LED 1 LED per channel for channel status 1 LED for power ON Polarity distribution 1 common/16 channels for output Short circuit protection 0.125 A fuse per channel, 5 x 20 mm, fast blow (output circuit) 2 A internal fuse, 5 x 20 mm, fast blow (controller side) Connector type HE-10 Pin number 20 pins Fixing mode By screws By clips on 35 mm symmetrical DIN rail conforming to IEC 60715 Supply current <= 2 A Current per channel 0.0032 A Switched current 100 mA for output circuit Current per output common 1.6 A Voltage drop on power supply fuse 0.3 V [Ui] rated insulation voltage 2000 V between terminals/mounting rails Overvoltage category II conforming to IEC 60664-1 Tightening torque 0.6 N.m (withflat Ø 3.5 mm Product weight 0.45 kg Jun 24, 2018 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Environment Product certifications CSA UL IP degree of protection IP2x conforming to IEC 60529 Resistance to incandescent wire 750 °C conforming to IEC 60695-2-11 Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27 Vibration resistance 2 gn (f = 10...150 Hz) conforming to IEC 60068-2-6 Resistance to electrostatic discharge 8 kV (air) conforming to IEC 61000-4-2 level 3 4 kV (contact) conforming to IEC 61000-4-2 level 3 Resistance to radiated fields 10 V/m (80000000...2000000000 Hz) conforming to IEC 61000-4-3 level 3 Resistance to fast transients 2 kV conforming to IEC 61000-4-4 level 3 Ambient air temperature for operation -5...60 °C conforming to IEC 61131-2 Ambient air temperature for storage -40...80 °C conforming to IEC 61131-2 Pollution degree 2 conforming to IEC 60664-1 2 Product data sheet ABE7E16SPN22 Dimensions Drawings Dimensions (1) ABE7BV10 / BV20 / BV20TB 3 Product data sheet ABE7E16SPN22 Mounting and Clearance Mounting 4 Product data sheet ABE7E16SPN22 Connections and Schema HE10 16 Channels Wiring Diagram (1) Inductive load 5 Product data sheet ABE7E16SPN22 Performance Curves Curves for Determining Cable Type and Length According to the Current L Cable length I Total current per sub base (A) T I Average current per channel (mA) A 2 (1) Cables ABFT2••••• c.s.a. 0.08 mm (AWG 28) The curves are given for a voltage drop of 1 V in the cable. For n volts tolerance, multiply the length determined from the graph by n. 6