Product data sheet ABE7R16T230 Characteristics sub-base - soldered electromechanical relays ABE7 - 16 channels - relay 10 mm Main Range of product Advantys Telefast ABE7 Product or component Sub-base with plug-in electromechanical relay type Sub-base type Output sub-base [Us] rated supply volt- 19...30 V conforming to IEC 61131-2 age Number of channels 16 Complementary Supply voltage type DC Product compatibility ABR7S23 Contacts type and composition 1 C/O Status LED 1 LED, green for power ON 1 LED per channel, green for channel status Polarity distribution Volt-free Short circuit protection 0.5 A fuse per channel, 5 x 20 mm, fast blow (output circuit) 1 A internal fuse, 5 x 20 mm, fast blow (PLC end) Fixing mode By screws on solid plate with fixing kit By clips on 35 mm symmetrical DIN rail Supply current <= 1 A Voltage drop on power supply fuse 0.3 V [Ui] rated insulation voltage 300 V between coil circuit/contact circuits conforming to IEC 60947-1 2000 V between terminals/mounting rails [Uimp] rated impulse withstand voltage 2.5 kV Installation category II conforming to IEC 60664-1 Tightening torque 0.6 N.m (withflat Ø 3.5 mm Product weight 0.775 kg Environment Product certifications BV CSA DNV GL LROS (Lloyds register of shipping) UL IP degree of protection IP2x conforming to IEC 60529 Resistance to incandescent wire 750 °C conforming to IEC 60695-2-11 Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27 Vibration resistance 2 gn (f = 10...150 Hz) conforming to IEC 60068-2-6 Resistance to electrostatic discharge 8 kV (air) conforming to IEC 61000-4-2 level 3 4 kV (contact) conforming to IEC 61000-4-2 level 3 Resistance to radiated fields 10 V/m (26000000...1000000000 Hz) conforming to IEC 61000-4-3 level 3 Resistance to fast transients 2 kV conforming to IEC 61000-4-4 level 3 Ambient air temperature for operation -5...60 °C conforming to IEC 61131-2 Ambient air temperature for storage -40...80 °C conforming to IEC 61131-2 Pollution degree 2 conforming to IEC 60664-1 Jun 24, 2018 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Product data sheet ABE7R16T230 Dimensions Drawings Dimensions (1) ABE7BV10 / BV20, ABE7BV10E / BV20E 2 Product data sheet ABE7R16T230 Mounting and Clearance Mounting 3 Product data sheet ABE7R16T230 Connections and Schema Wiring Diagram (1) 16 channels 4 Product data sheet ABE7R16T230 Performance Curves Curves for Determining Cable Type and Length According to the Current 16-channel Sub-base L Cable length I Total current per sub base (A) T I Average current per channel (mA) A 2 (1) TSXCDP••2 and ABFH20H••0 cables with c.s.a. 0.08 mm (AWG 28). 2 (2) TSXCDP••3 cables with c.s.a. 0.34 mm (AWG 22). 2 (3) Cables with c.s.a. 0.13 mm (AWG 26). The curves are given for a voltage drop of 1 V in the cable. For n volts tolerance, multiply the length determined from the graph by n. Electrical Durability (in Millions of Operating Cycles) Conforming to IEC 60947-5-1 Multiply all durability values by 0.75 for ABR7S23. DC Loads DC12 curves DC12control of resistive loads and of solid state loads isolated by optocoupler, l/R ≤ 1 ms. DC13 curves DC13switching electromagnets, L/R ≤ 2 x (Ue x Ie) in ms, Ue: rated operational voltage, Ie: rated operational current (with a protective diode on the load, DC12 curves must be used with a coefficient of 0.9 applied to the number in millions of operating cycles) 5 AC Loads AC12 curves AC12control of resistive loads and of solid state loads isolated by optocoupler, cos ϕ ≥ 0.9. AC14 curves AC14control of small electromagnetic loads ≤ 72 VA, make: cos ϕ = 0.3, break: cos ϕ = 0.3. AC15 curves AC15control of electromagnetic loads > 72 VA, make: cos ϕ = 0.7, break: cos ϕ = 0.4. 6