Product data sheet ABE7S16E2F0 Characteristics sub-base - soldered solid state output relay ABE7 - 16 inputs - 115 V AC Main Range of product Advantys Telefast ABE7 Product or component Solid state input relay sub-base type [Us] rated supply volt- 24 V DC (PLC end) age 110/130 V AC 50/60 Hz (sensor end) Number of channels 16 Number of terminal per 2 channel Connections - terminals Screw type terminals, clamping capacity: 2 x 0.2...2 x 2.5 mm², cable cross section: 0.2...2.5 mm² AWG 24...14 solid Screw type terminals, clamping capacity: 2 x 0.09...2 x 0.75 mm², cable cross section: 0.09...0.75 mm² AWG 28...20 flexible with cable end Screw type terminals, clamping capacity: 1 x 0.14...1 x 2.5 mm², cable cross section: 0.14...2.5 mm² AWG 26...14 flexible without cable end Screw type terminals, clamping capacity: 1 x 0.14...1 x 2.5 mm², cable cross section: 0.14...2.5 mm² AWG 26...12 solid Screw type terminals, clamping capacity: 1 x 0.09...1 x 1.5 mm², cable cross section: 0.09...1.5 mm² AWG 28...16 flexible with cable end Complementary Terminal block type Removable Supply voltage limits 19...30 V DC (PLC end) conforming to IEC 61131-2 Isolation PLC/operative part Yes Protection type Internal fuse of 1 A (5 x 20 mm) , fast blow type at PLC end Adjustable by external fuse , fast blow type at sensor end Fixing mode By screws on solid plate with fixing kit By clips on 35 mm symmetrical DIN rail [Ie] rated operational current AC <= 0.0083 A Current state 1 guaranteed >= 5 mA (sensor end) Voltage state1 guaranteed >= 79 V (sensor end) Maximum switching current 15 mA (PLC end) Minimum switching current 1 mA (PLC end) Response time <= 20 ms from state 1 to 0 <= 20 ms from state 0 to 1 Switching frequency <= 25 Hz duty cycle: 50 % [Uimp] rated impulse withstand voltage 2.5 kV conforming to IEC 60947-1 [Ui] rated insulation voltage 2000 V Installation category II conforming to IEC 60664-1 Tightening torque 0.6 N.m (withflat Ø 3.5 mm Product weight 0.397 kg Jun 24, 2018 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Environment Dielectric strength 2000 V 50/60 Hz conforming to IEC 60947-1 Product certifications BV CSA DNV GL LROS (Lloyds register of shipping) UL Standards IEC 61131-2 Type 1 IP degree of protection IP2x conforming to IEC 60529 Resistance to incandescent wire 750 °C conforming to IEC 60695-2-11 Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27 Vibration resistance 2 gn (f = 10...150 Hz) conforming to IEC 60068-2-6 Resistance to electrostatic discharge 8 kV (air) conforming to IEC 61000-4-2 level 3 4 kV (contact) conforming to IEC 61000-4-2 level 3 Resistance to radiated fields 10 V/m (26000000...1000000000 Hz) conforming to IEC 61000-4-3 level 3 Resistance to fast transients 2 kV conforming to IEC 61000-4-4 level 3 Ambient air temperature for operation -5...60 °C conforming to IEC 61131-2 Ambient air temperature for storage -40...80 °C conforming to IEC 61131-2 Pollution degree 2 conforming to IEC 60664-1 2 Product data sheet ABE7S16E2F0 Dimensions Drawings Dimensions (1) ABE7BV20 / ABE7BV20E 3 Product data sheet ABE7S16E2F0 Mounting and Clearance Mounting 4 Product data sheet ABE7S16E2F0 Connections and Schema HE10 16 Channels Wiring Diagram ABE7 U1, U2 S16E2B1 / E2B1E 24 VDC S16E2E1 / E2E1E 48 VDC S16E2E0 / E2E0E 48 VAC S16E2F0 / E2F0E 115 VAC S16E2M0 / E2M0E 230 VAC 5 Product data sheet ABE7S16E2F0 Performance Curves Curves for Determining Cable Type and Length According to the Current 16-channel Sub-base L Cable length I Total current per sub base (A) T I Average current per channel (mA) A 2 (1) TSXCDP••2 and ABFH20H••0 cables with c.s.a. 0.08 mm (AWG 28). 2 (2) TSXCDP••3 cables with c.s.a. 0.34 mm (AWG 22). 2 (3) Cables with c.s.a. 0.13 mm (AWG 26). The curves are given for a voltage drop of 1 V in the cable. For n volts tolerance, multiply the length determined from the graph by n. 6