SCHNEIDER ELECTRIC ABL8BBU24200

Product data sheet ABL8BBU24200 Characteristics battery control module - 24..28.8 V DC - 24 V - 20 A - for regulated SMPS Main Range of product Phaseo Product or component Battery control module type Input voltage 24...28.8 V DC Output voltage (Ubattery-0.5) V in battery mode DC (Uin-0.25) V in nominal mode DC Maximum output cur- 20 A rent Complementary Input voltage limits 22...30 V Current consumption <= 40.6 A 0.1 mA , no load 0.6 A , on load Power dissipation in W < 7 W Activation threshold Adjustable 22...36 V Number of output channels 1 Residual ripple <= 200 mV Output protection type Against overload , protection technology: 1.5 x In Against short-circuits , protection technology: battery-backed mode, automatic re- set Against short-circuits , protection technology: power-supplied mode Connections - terminals Removable screw terminal block for diagnostic relay , connection capacity: 1 x 0.75 mm² Screw type terminals for input connection , connection capacity: 2 x 0.5...2 x 10 mm² AWG gauge20...8 Screw type terminals for output connection , connection capacity: 2 x 0.5...2 x 10 mm² AWG gauge20...8 Fixing mode By clips on 35 mm symmetrical DIN rail , operating position: horizontal By clips on 35 mm symmetrical DIN rail , operating position: vertical Name of test Electrostatic discharges conforming to EN/IEC 61000-4-2 Emission conforming to EN 61000-6-3 Induced electromagnetic field conforming to EN/IEC 61000-4-6 level 3 Radiated electromagnetic field conforming to EN/IEC 61000-4-3 level 3 Rapid transient conforming to IEC 61000-4-4 level 3 Surge conforming to EN/IEC 61000-4-5 level 2 Conducted/Radiated emissions conforming to EN 55022 Class B , 20 % derating factor Local signalling 1 C/O relay , function: alarm status 1 C/O relay , function: battery status 1 C/O relay , function: power supply status LCD screen , function: module status Product weight 0.5 kg Environment IP degree of protection IP10 conforming to EN/IEC 60529 Ambient air temperature for operation -25...60 °C Ambient air temperature for storage -40...85 °C Relative humidity 0...90 % during operation 0...95 % during storage Class of protection against electric shock Class II conforming to VDE 0106-1 Jun 24, 2018 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Vibration resistance 3.5 mm (f = 3...11.9 Hz) conforming to EN/IEC 61131-2 2 gn (f = 11.9...150 Hz) conforming to EN/IEC 61131-2 Dielectric strength 500 V between input and ground 500 V between output and ground Product certifications CCSAus UL Environmental characteristic EMC conforming to EN 61000-6-3 EMC conforming to EN/IEC 61000-6-2 Safety conforming to EN/IEC 60950-1 Safety conforming to EN/IEC 61204-3 2 Product data sheet ABL8BBU24200 Dimensions Drawings 24 Vdc/20 A Battery Control Module Dimensions 3 Product data sheet ABL8BBU24200 Mounting and Clearance 24 Vdc Battery Control Module Mounting 24 Vdc Battery Control Module Clearance 4 Product data sheet ABL8BBU24200 Connections and Schema 24 Vdc Battery Control Module Wiring Diagram (1) See table below for the maximum unstored charge capacity (µF) ABL Max. Unstored Charge Capacity (uF) 8RPS24030 30 000 8RPS24050 50 000 8RPS24100 100 000 8RPS24200 100 000 8RPS24400 100 000 24 Vdc Battery Control Module Outputs States (U = 24 Vdc: I > 5 mA, U = 230 Vac: I < 500 mA) No power from the power supply Power from the power supply Alarm or device not supplied No alarm No power from the battery pack Power from the battery pack Inputs States (Dry Contact) Operational battery Battery inhibited Wiring Requirements 5 Cable Types and Wire Sizes IEC / EN UL 6