Product data sheet ATS01N285Q Characteristics soft starter for asynchronous motor - ATS01 - 85 A - 400 V - 45 KW Price* : 1841.00 USD ATS01N285Q has not been replaced. Please contact your customer care center for more information. Discontinued Main Range of product Altistart 01 Product or component type Soft starter Product destination Asynchronous motors Product specific application Simple machine Device short name ATS01 Phase 3 phases [Us] rated supply voltage 400 V - 15...10 % Motor power kW 45 kW 3 phases 400 V Motor power hp 50 hp 3 phases 400 V IcL starter rating 85 A Utilisation category AC-53B EN/IEC 60947-4-2 Current consumption 255 A at nominal load Type of start Start with voltage ramp Power dissipation in W 23 W at full load and at end of starting 514 W in transient state Complementary Assembly style With heat sink Function available Integrated bypass Supply voltage limits 340...440 V Supply frequency 50...60 Hz - 5...5 % Network frequency 47.5...63 Hz Output voltage <= power supply voltage [Uc] control circuit voltage Built into the starter Starting time 1 s 360 12 s 30 Adjustable from 1 to 25 s Deceleration time symb Adjustable from 1 to 25 s Starting torque 30...80 % of starting torque of motor connected directly on the line supply Discrete input type Internal LI1, LI2, BOOST stop, run and boost on start-up functions <= 8 mA Discrete input voltage 24 V Discrete input logic Positive logic LI1, LI2, BOOST <= 3 V >= 10 V Jun 24, 2018 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Discrete output current 2 A DC-13 3 A AC-15 Discrete output type Relay outputs R1A, R1C Discrete output voltage 24 V DC relay outputs 250 V AC relay outputs Minimum switching current 10 mA 17 V DC relay outputs Display type 1 LED green starter powered up 1 LED yellow nominal voltage reached Tightening torque 6.19 lbf.in (0.7 N.m) 44.25 lbf.in (5 N.m) Electrical connection Earth connection: tinned connector fixed using Ø 6 mm screws 4 mm screw clamp terminal rigid 1 6...35 mm² power circuit Screw connector rigid 1 0.75...1.5 mm² control circuit 4 mm screw clamp terminal rigid 2 6...25 mm² power circuit Screw connector rigid 2 0.75...1.5 mm² control circuit 4 mm screw clamp terminal flexible with cable end 1 4...25 mm² power circuit Screw connector flexible with cable end 1 0.75...1.5 mm² control circuit 4 mm screw clamp terminal flexible without cable end 1 6...25 mm² power circuit Screw connector flexible without cable end 1 0.75...1.5 mm² control circuit 4 mm screw clamp terminal flexible with cable end 2 4...16 mm² power circuit Screw connector flexible with cable end 2 0.75...1.5 mm² control circuit 4 mm screw clamp terminal flexible without cable end 2 6...25 mm² power circuit Screw connector flexible without cable end 2 0.75...1.5 mm² control circuit Marking CE Operating position Vertical +/- 10 degree Height 5.75 in (146 mm) Width 7.09 in (180 mm) Depth 4.96 in (126 mm) Product weight 8.38 lb(US) (3.8 kg) Compatibility code ATS01N2 Environment Electromagnetic compatibility Damped oscillating waves level 3 IEC 61000-4-12 Electrostatic discharge level 3 IEC 61000-4-2 Immunity to electrical transients level 4 IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 Voltage/Current impulse level 3 IEC 61000-4-5 Conducted and radiated emissions level B IEC 60947-4-2 EMC immunity EN 50082-2 Harmonics IEC 1000-3-2 Harmonics IEC 1000-3-4 Immunity to conducted interference caused by radio-electrical fields level 3 IEC 61000-4-6 Micro-cuts and voltage fluctuation IEC 61000-4-11 EMC immunity EN 50082-1 Standards EN/IEC 60947-4-2 Product certifications CCC CSA UL GOST C-Tick B44.1-96/ASME A17.5 for starter wired to the motor delta terminal IP degree of protection IP20 on front panel Pollution degree 3 IEC 60664-1 3 UL 508 Vibration resistance 2 gn Shock resistance 8 gn 11 ms EN/IEC 60068-2-27 Relative humidity 5...95 % without condensation or dripping water EN/IEC 60068-2-3 Ambient air temperature for operation 32...131 °F (0...55 °C) Ambient air temperature for storage -13...158 °F (-25...70 °C) EN/IEC 60947-4-2 Operating altitude <= 6561.68 ft (2000 m) without derating > 6561.68 ft (2000 m) with current derating of 0.5 % per additional 100 m 2 Ordering and shipping details Category 22392 - ATSU01/ATS01 LOW HP SOFT STARTERS Discount Schedule I11 GTIN 00785901605232 Nbr. of units in pkg. 1 Package weight(Lbs) 9.7799999999999994 Returnability N Country of origin FR Contractual warranty Warranty period 18 months 3