Manufacturers
SCHNEIDER ELECTRIC LU2B32ES
Description
Motor Starter Power Base (TeSys U) Reversing, 32A, Op. Volt: 48 Vac - 48/72 Vdc"
Part Number
LU2B32ES
Price
Request Quote
Manufacturer
SCHNEIDER ELECTRIC
Lead Time
Request Quote
Category
Relays and I/O Modules » Solid State Relay
Specifications
Manufacturer
Schneider Electric
Manufacturers Part #
LU2B32ES
Industry Aliases
785901202578, LU2B32ES
Sub-Category
Solid State Relays
Factory Pack Quantity
1
Datasheet
CatalogueRetrieverServlet?fct=get_element&env=publish&scp_id=Z000&lc=en&el_typ=product&cat_id=BU_POW_682_L3&maj_v=3&min_v=1&nod_id=0000000002&prd_id=LU2B32ES&frm=pdf&pdf_frm=A4&dwnl=true.pdf
55 KiB
Extracted Text
Product data sheet LU2B32ES Characteristics power base - TeSys U - 32 A - 48...72 V DC screw clamps control Main Range of product TeSys U Device short name LU2B Product or component Reversing power base type Poles description 3P Suitability for isolation Yes [Ith] conventional free 32 A air thermal current Utilisation category AC-41 AC-43 AC-44 [Uc] control circuit volt- 48 V AC 50/60 Hz age 48...72 V DC Complementary Auxiliary contact composition 2 NO Auxiliary contacts type Type linked contacts (1 NO + 1 NC) conforming to IEC 60947-4-1 Type mirror contact (1 NC) state of the power conforming to draft IEC 60947-1 [Ue] rated operational voltage 230 V 440 V 500 V 690 V Network frequency 40...60 Hz [Ie] rated operational current 21 A at 690 V 23 A at 500 V 32 A at <= 440 V [Ics] rated service breaking capacity 10 kA 500 V 4 kA 690 V 50 kA 230 V 50 kA 440 V Control circuit voltage limits 29 V 48 V AC drop-out 29 V 48...72 V DC drop-out 38.5...72 V 48 V AC in operation 38.5...93 V 48...72 V DC in operation Typical current consumption 280 mA at 48...72 V AC I maximum while closing 280 mA at 48...72 V DC I maximum while closing 35 mA at 48...72 V AC I rms sealed 35 mA at 48...72 V DC I rms sealed Duration of inrush phase 15 ms for DC network 25 ms for AC network 50/60 Hz Safety reliability level B10d 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d 20000000 cycles contactor with mechanical load EN/ISO 13849-1 Operating time 150 ms with change of direction for power circuit 35 ms opening for control circuit 60 ms closing for control circuit 75 ms without change of direction for power circuit Mechanical durability 15000000 cycles Operating rate 60 cyc/mn [Ui] rated insulation voltage 600 V conforming to CSA C22-2 No 14 600 V conforming to UL 508 690 V conforming to IEC 60947-1 3 [Uimp] rated impulse withstand voltage 6 kV conforming to IEC 60947-6-2 Safe separation of circuit 400 V SELV between the control and auxiliary circuits conforming to IEC 60947-1 appendix N 400 V SELV between the control or auxiliary circuit and the main circuit conform- ing to IEC 60947-1 appendix N Jun 24, 2018 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Connections - terminals Control circuit: screw clamp terminals 1 cable 0.34...1.5 mm² - cable stiffness: flexible - with cable end Control circuit: screw clamp terminals 1 cable 0.75...1.5 mm² - cable stiffness: flexible - without cable end Control circuit: screw clamp terminals 1 cable 0.75...1.5 mm² - cable stiffness: rigid - without cable end Control circuit: screw clamp terminals 2 cable 0.34...1.5 mm² - cable stiffness: flexible - with cable end Control circuit: screw clamp terminals 2 cable 0.75...1.5 mm² - cable stiffness: flexible - without cable end Control circuit: screw clamp terminals 2 cable 0.75...1.5 mm² - cable stiffness: rigid - without cable end Power circuit: screw clamp terminals 1 cable 1...10 mm² - cable stiffness: rigid - without cable end Power circuit: screw clamp terminals 1 cable 1...6 mm² - cable stiffness: flexible - with cable end Power circuit: screw clamp terminals 1 cable 2.5...10 mm² - cable stiffness: flexi- ble - without cable end Power circuit: screw clamp terminals 2 cable 1...6 mm² - cable stiffness: flexible - with cable end Power circuit: screw clamp terminals 2 cable 1...6 mm² - cable stiffness: rigid - without cable end Power circuit: screw clamp terminals 2 cable 1.5...6 mm² - cable stiffness: flexible - without cable end Tightening torque Control circuit: 0.8...1.2 N.m - with screwdriver 5 mm flat Control circuit: 0.8...1.2 N.m - with screwdriver 5 mm Philips no 1 Power circuit: 1.9...2.5 N.m - with screwdriver 6 mm flat Power circuit: 1.9...2.5 N.m - with screwdriver 6 mm Philips No 2 Width 45 mm Height 224 mm Depth 126 mm Product weight 1.27 kg Environment Heat dissipation 3 W for control circuit with LUCA, LUCB, LUCC, LUCD 1.8 W for control circuit with LUCM Immunity to microbreaks 3 ms Immunity to voltage dips 70 % 500 ms conforming to IEC 61000-4-11 Product certifications ABS ASEFA ATEX BV CCC CSA DNV (Det Norske Veritas) GL GOST LROS (Lloyds register of shipping) UL Standards CSA C22-2 No 14 type E EN 60947-6-2 IEC 60947-6-2 UL 508 type E with phase barrier IP degree of protection IP20 front panel and wired terminals conforming to IEC 60947-1 IP20 other faces conforming to IEC 60947-1 IP40 front panel outside connection zone conforming to IEC 60947-1 Protective treatment TH conforming to IEC 60068 Ambient air temperature for operation -25...60 °C with LUCM -25...70 °C with LUCA, LUCB, LUCC, LUCD Ambient air temperature for storage -40...85 °C Fire resistance 650 °C conforming to IEC 60695-2-12 960 °C parts supporting live components conforming to IEC 60695-2-12 Operating altitude 2000 m Shock resistance 10 gn power poles open conforming to IEC 60068-2-27 15 gn power poles closed conforming to IEC 60068-2-27 Vibration resistance 2 gn 5...300 Hz power poles open conforming to IEC 60068-2-27 4 gn 5...300 Hz power poles closed conforming to IEC 60068-2-27 Resistance to electrostatic discharge 8 kV level 3 in open air conforming to IEC 61000-4-2 8 kV level 4 on contact conforming to IEC 61000-4-2 Resistance to radiated fields 10 V/m 3 conforming to IEC 61000-4-3 2 Resistance to fast transients 2 kV class 3 serial link conforming to IEC 61000-4-4 4 kV class 4 all circuits except for serial link conforming to IEC 61000-4-4 Non-dissipating shock wave 1 kV serial mode conforming to IEC 60947-6-2 2 kV common mode conforming to IEC 60947-6-2 Immunity to radioelectric fields 10 V conforming to IEC 61000-4-6 3
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the LU2B32ES?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Input Interface Module - 9.5 Mm - Solid State -115-127 V Ac 60 Hz
Characteristics input interface module - 9.5 mm - solid state -
Characteristics input interface module - 9.5 mm - solid state - 5
Input Interface Module - 9.5 Mm - Solid State -24 V Dc
Input Interface Module - 9.5 mm - Solid State - 48 VDC
Characteristics output interface module - 9.5 mm - solid state -
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods