Product data sheet RM35BA10 Characteristics pump control relay RM35-BA - range 1..10 A Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 284.00 USD Main Range of product Zelio Control Product or component type Modular measurement and control relays Relay type Pump control relays Product specific application For 3-phase and single-phase pump Relay name RM35BA Relay monitored parameters Overcurrent and undercurrent control Phase failure on 3-phase supply Phase sequence on 3-phase supply Time delay type Ti on energisation adjustable 1...60 s, +/- 10 % Reset on terminal Y2 fixed 0.3 s Tt on crossing the threshold adjustable 0.1...10 s, +/- 10 % Switching capacity in VA 1250 VA Minimum switching current 10 mA at 5 V DC Maximum switching current 5 A AC/DC Power consumption in VA <= 5 VA AC Measurement range 1...10 A AC Utilisation category AC-12 conforming to IEC 60947-5-1 AC-13 conforming to IEC 60947-5-1 AC-14 conforming to IEC 60947-5-1 AC-15 conforming to IEC 60947-5-1 DC-12 conforming to IEC 60947-5-1 DC-13 conforming to IEC 60947-5-1 Complementary Reset time 2000 ms Maximum switching voltage 250 V AC/DC [Us] rated supply voltage 208...480 V AC 3 phases 230 V AC single phase [Us] rated supply voltage 208...480 V AC 3 phases 230 V AC 1 phase Jun 24, 2018 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Supply voltage limits 183...528 V AC Control circuit voltage limits - 15 % + 10 % Un Resistance across terminals 0.01 Ohm E1-L2 terminals Width 1.38 in (35 mm) Output contacts 1 C/O Nominal output current 5 A Measuring cycle <= 140 ms as true rms value Run-up delay at power-up 0.5 s Hysteresis 5 % of threshold Measurement accuracy +/- 10 % of the full scale value Repeat accuracy +/- 1 % input and measurement circuit +/- 1 % time delay Measurement error +/- 0.05 %/°C 1 % by volt over the whole range Response time < 300 ms in the event of a fault Input current 11 A permanent at 25 °C E1-L2 terminals 50 A non repetitive < 1 s at 25 °C E1-L2 terminals Marking CE : 73/23/EEC CE : EMC 89/336/EEC Overvoltage category III conforming to IEC 60664-1 Insulation resistance > 500 MOhm at 500 V DC between supply and relay output conforming to 60255-5 > 500 MOhm at 500 V DC between measurement and relay output conforming to 60664-1 > 1 MOhm at 500 V DC between supply and measurement conforming to 60255-5 > 500 MOhm at 500 V DC between supply and relay output conforming to 60664-1 > 500 MOhm at 500 V DC between measurement and relay output conforming to 60255-5 > 1 MOhm at 500 V DC between supply and measurement conforming to 60664-1 [Ui] rated insulation voltage 400 V conforming to IEC 60664-1 Supply frequency 50/60 Hz +/- 10 % Operating position Any position Connections - terminals Screw terminals 1 x 0.5...1 x 4 mm² - AWG 20...AWG 11, solid cable without cable end Screw terminals 2 x 0.5...2 x 2.5 mm² - AWG 20...AWG 14, solid cable without cable end Screw terminals 1 x 0.2...1 x 2.5 mm² - AWG 24...AWG 12, flexible cable with cable end Screw terminals 2 x 0.2...2 x 1.5 mm² - AWG 24...AWG 16, flexible cable with cable end Tightening torque 5.31...8.85 lbf.in (0.6...1 N.m) conforming to IEC 60947-1 Housing material Self-extinguishing plastic Status LED 1 LED green power ON 1 LED yellow fault 1 LED yellow relay ON Mounting support 35 mm symmetrical DIN rail conforming to EN/IEC 60715 Electrical durability 100000 cycles Mechanical durability 30000000 cycles Operating rate <= 360 operations/hour under full load Environment Immunity to microbreaks 500 ms Electromagnetic compatibility Emission standard for industrial environments conforming to EN/IEC 61000-6-4 Emission standard for residential, commercial and light-industrial environments conforming to EN/IEC 61000-6-3 Immunity for industrial environments conforming to NF EN/IEC 61000-6-2 Standards EN/IEC 60255-6 Product certifications CSA C-Tick GL GOST UL Ambient air temperature for storage -40...158 °F (-40...70 °C) Ambient air temperature for operation -4...122 °F (-20...50 °C) Relative humidity 95 % at 131 °F (55 °C) conforming to IEC 60068-2-30 Vibration resistance 0.35 mm (f = 5...57.6 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1 2 1 gn (f = 57.6...150 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1 Shock resistance 15 gn 11 ms conforming to IEC 60255-21-1 IP degree of protection IP20(Terminals) conforming to IEC 60529 IP30 (casing) conforming to IEC 60529 Pollution degree 3 conforming to IEC 60664-1 Dielectric strength 2 kV AC 50 Hz (shock wave 4 kV) Ordering and shipping details Category 22380 - RELAYS-MEASUREMENT (RM17-RM35) Discount Schedule CP2 GTIN 00785901637417 Nbr. of units in pkg. 1 Package weight(Lbs) 0.27000000000000002 Returnability N Country of origin ID Offer Sustainability Sustainable offer status Green Premium product RoHS (date code: YYWW) Compliant  - since  0701  -  Schneider Electric declaration of conformity Schneider Electric declaration of conformity REACh Reference not containing SVHC above the threshold Reference not containing SVHC above the threshold Product environmental profile Available Product end of life instructions Available Contractual warranty Warranty period 18 months 3