Product data sheet XCKJ161 Characteristics limit switch XCKJ - metal end plunger - 1NO +1NC - snap action - Pg13 Main Range of product OsiSense XC Series name Standard format Product or component Limit switch type Device short name XCKJ Sensor design Form B conforming to CENELEC EN 50041 Body type Fixed Head type Plunger head Material Metal Fixing mode By the body Movement of operating Linear head Type of operator Metal spring return plunger Switch actuation On end Type of approach 1 direction vertical approach Electrical connection Screw-clamp terminals, clamping capacity: 1 x 0.34...2 x 1.5 mm² Cable entry 1 entry tapped for Pg 13.5 cable gland, cable outer diameter: 9 - 12 mm Number of poles 2 Contacts type and com- 1 NO + 1 NC position Contacts operation Snap action Positive opening With Complementary Body material Zamak Head material Zamak Contacts insulation form Zb Number of steps 1 Positive opening min force 50 N Minimum force for tripping 20 N Maximum actuation speed 0.5 m/s Repeat accuracy 0.1 mm on the tripping points with 1 million operating cycles Contact code designation A300, AC-15 (Ue = 240 V, Ie = 3 A) conforming to EN/IEC 60947-5-1 appendix A Q300, DC-13 (Ue = 250 V, Ie = 0.27 A) conforming to EN/IEC 60947-5-1 ap- pendix A Ithe cnvtl enclosed therm crrt 10 A, AC Ui rated insulation voltage 300 V conforming to CSA C22-2 No 14 300 V conforming to UL 508 500 V degree of pollution 3 conforming to IEC 60947-1 Resistance across terminals <= 25 mOhm conforming to IEC 60255-7 category 3 Uimp rated imp wstdvoltage 6 kV conforming to IEC 60664 6 kV conforming to IEC 60947-1 Short circuit protection 10 A by gG cartridge fuse Electrical durability 5000000 cycles, DC-13 inductive load type , 120 V 5000000 cycles, DC-13 inductive load type , 24 V 5000000 cycles, DC-13 inductive load type , 48 V Mechanical durability 30000000 cycles Width 40 mm Height 77 mm Jun 24, 2018 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Depth 44 mm Product weight 0.43 kg CAD overall width 40 mm CAD overall height 107 mm CAD overall depth 44 mm Terminals description ISO n┬░1 (13-14)NO (21-22)NC Environment Shock resistance 50 gn (duration = 11 ms) conforming to IEC 60068-2-27 Vibration resistance 25 gn (f = 10 - 500 Hz) conforming to IEC 60068-2-6 IP degree of protection IP66 conforming to IEC 60529 IK degree of protection IK07 conforming to EN 50102 Class of prot agnst elec shock Class I conforming to IEC 61140 Class I conforming to NF C 20-030 Ambient air temp for op -25...70 °C Ambient air temp for storage -40...70 °C Protective treatment TC Product certifications CCC CSA UL Standards CENELEC EN 50041 CSA C22-2 No 14 EN 60204-1 EN 60947-5-1 IEC 60204-1 IEC 60947-5-1 UL 508 2