Product data sheet XMLF010D2125 Characteristics pressure sensor 10 bar - G1/4 (female) - 24 V - NO or NC - 0..10 V Main Maximum switching 200 mA current Electrical connection 4 pins male connector M12 Wiring techniquees 4 wire DC PNP or NPN Fluid connection type G 1/4 (female) conforming to ISO 228 Controlled fluid Air (-15 - 80 °C) Corrosive fluid (-15 - 80 °C) Fresh water (-15 - 80 °C) Hydraulic oil (-15 - 80 °C) Sea water (-15 - 80 °C) Type of output signal Analogue + discrete Discrete output type Solid state PNP or NPN programmable, 1 NO or 1 NC programmable Analogue output func- 0...10 V tion Materials in contact wth FPM (Viton) fluid Stainless steel type AISI 303 Type of installation Control circuit Pressure swt type of Regulation between 2 thresholds operation Pressure sensor size 10 bar Adj range low setting 0.5...9.7 bar Adj range high setting 0.8...10 bar Possible diff min at low 0.3 bar setg Possible diff min at high 0.3 bar setg Possible diff max at 9.5 bar high setg Max perm accidental 40 bar pressure Destruction pressure 60 bar Range of product OsiSense XM Pressure sensor name XMLF Product or component Electronic pressure sensors type Product specific appli- - cation Type of scale Adjustable differential scale Local display With Us rated supply voltage 24 V DC, voltage limits: 17 - 33 V Complementary CAD overall depth 58 mm CAD overall height 113 mm CAD overall width 46 mm Current consumption 80 mA Drift of the sensitivity < +/- 0.03 % of msrg range /°C Drift of the zero point < +/- 0.1 % of msrg range /°C Mechanical durability >= 10000000 cycles Jun 24, 2018 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Protection type Connection faults Overload protection Reverse polarity Short-circuit protection Time delay range 0 - 50 s in steps of 1 second Setting External setting Operating rate in Hz <= 50 Hz Response time on output 5 - 500 ms, in steps of 1 ms Display response time type Fast Normal Slow Surge withstand 0.5 kV DC Product weight 0.48 kg Measurement accuracy <= 0.6 % of the measuring range Repeat accuracy <= 0.5 % Environment Protective treatment TC Vibration resistance 35 gn (f = 60 - 2000 Hz) conforming to IEC 68-2-6 5 gn (f = 25 - 200 Hz) conforming to IEC 68-2-6 Shock resistance 50 gn conforming to IEC 68-2-27 Resistance to fast transients 2 kV conforming to EN 61000-4-4 IP degree of protection IP67 conforming to EN/IEC 60529 NEMA degree of protection NEMA 12 NEMA 13 NEMA 4 NEMA 6 Operating position Any position Standards CE EN 50081 EN 50082 EN 61000-4-11 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-8 EN 61000-6-2 EN/IEC 60947-1 EN/IEC 60947-5-1 Product certifications CSA UL Ambient air temp for op -25...80 °C Resist electrostatic dischrg 4 kV (on contact) conforming to EN 61000-4-2 8 kV (in air) conforming to EN 61000-4-2 Resist to electromagn fields 10 V/m conforming to EN 61000-4-3 Resist to conductd disturbs 10 V conforming to EN 61000-4-6 2