SCHNEIDER ELECTRIC XPSMC16ZPACK

Product data sheet XPSMC16ZPACK Characteristics safety controller XPS-MC - 24 V DC - 16 input - 30 LEDs signalling Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 2580.00 USD Main Range of product Preventa Safety automation Product or component type Kit configurable safety controller Safety module name XPSMC Safety use category Category 4 maximum conforming to EN 954-1/EN/ISO 13849-1 PLE maximum conforming to EN/ISO 13849-1 SIL 3 maximum conforming to IEC 61508 Type of start Configurable Standards EN/IEC 61496-1 EN 954-1/EN/ISO 13849-1 EN/IEC 60204-1 EN 574/ISO 13851 EN/IEC 60947-5-1 IEC 61508 EN 1760-1/ISO 13856-1 Product certifications UL CSA TÜV [Us] rated supply voltage 24 V DC - 20...20 % Number of inputs 16 Communication port protocol Modbus with 1 RJ45 port(s), serial link, transmission rate: 1200 bps, 2400 bps, 4800 bps, 9600 bps or 19200 bps Safety level Can reach PL e/category 4 conforming to EN 954-1/EN/ISO 13849-1 Can reach SIL 3 conforming to IEC 61508 Complementary Kit composition Connection cable USB/RS485 converter Ethernet cable 2m Safety controller Configuration software Printed packaging label 80 x 50 mm Set of screw terminals Packaging small model for software configuration VDE slot screwdriver 2.5 x 75 mm Set of cage clamp terminals Function of module Dynamic monitoring of hydraulic valves on linear presses Eccentric press Jun 24, 2018 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Emergency stop monitoring, with or without time delay, 1 or 2-channel wiring Enabling switch monitoring, 2 or 3 contacts Foot switch monitoring Guard monitoring for injection presses and blowing machines Guard monitoring with 1 or 2 limit switches Hydraulic press Magnetic switch monitoring Monitoring safety stop at top dead centre on eccentric press Muting function of light curtains Position selector Safety mat monitoring Safety time delays Shaft/Chain breaking monitor Zero speed detection Light curtain monitoring (category 4) conforming to EN/IEC 61496 Two-hand control (category 3) conforming to EN 574/ISO 13851 Synchronisation time between inputs Depending on configuration selected Power consumption in W 12 W Input protection type External fuse 16 A [Uc] control circuit voltage 28.8 V Line resistance 100 Ohm 2000 m Output type 2 relays, 2 NO contacts (4 NO total) circuit(s) Solid state, 6 circuit(s), volt-free Breaking capacity C300: holding 180 VA AC-15 relay output C300: inrush 1800 VA AC-15 relay output Breaking capacity 1.5 A/24 V - L/R = 50 ms, DC-13 relay output 2 A/24 V for static output circuit Output thermal current 4 A for both outputs simultaneously 6 A for 1 output and 2 A for the other relay output [Ith] conventional free air thermal <= 16 A for relay output current <= 6.5 A for static output circuit Associated fuse rating 16 A gL for power supply 4 A gL for relay output 6 A fast blow for relay output Minimum output current 10 mA relay output Minimum output voltage 17 V relay output Response time Configurable : 20 ms or 30 ms with software XPSMCWIN [Ui] rated insulation voltage 300 V, degree of pollution 2 conforming to IEC 60647-5-1, DIN VDE 0110 part 1 [Uimp] rated impulse withstand voltage 4 kV overvoltage category III conforming to IEC 60647-5-1, DIN VDE 0110 part 1 Method of access Slave Exchange size 14 words Number of addresses 1...247 Modbus Parity Even Modbus No Modbus Odd Modbus Data format 1 start bit/8 data bits 1 stop bit even or odd 2 stop bits without parity RTU (Remote Terminal Unit) mode Supported modbus function 01: 8-bit output data/32-bit input data 02: 32-bit input data/8-bit output data 03: information and errors Local signalling 30 LEDs Mounting support Mounting plate Depth 6.02 in (153 mm) Height 5.96 in (151.5 mm) Width 2.91 in (74 mm) Product weight 1.81 lb(US) (0.82 kg) Environment IP degree of protection IP20 conforming to EN/IEC 60529 2 Ambient air temperature for operation 14...131 °F (-10...55 °C) Ambient air temperature for storage -13...185 °F (-25...85 °C) Ordering and shipping details Category 22477 - SAFETY MODULES (PREVENTA) Discount Schedule SAF2 GTIN 00785901605140 Nbr. of units in pkg. 1 Package weight(Lbs) 4.4100000000000001 Returnability N Country of origin FR Contractual warranty Warranty period 18 months 3 Product data sheet XPSMC16ZPACK Dimensions Drawings Dimensions 1 When using XPSMCTS• connectors this dimension is 153 mm (6.02 in) When using XPSMCTC• connectors this dimension is 151,5 mm (5.96 in) 4 Product data sheet XPSMC16ZPACK Mounting and Clearance Installation Metal adaptor for fixing on metal: DIN rail 35 mm/1.38 in. 5 Product data sheet XPSMC16ZPACK Connections and Schema Wiring Diagrams Refer to the Instruction Sheet To download the instruction sheet, follow below procedure: 1 Click on Download & Documents. 2 Click on Instruction sheet. 6 Product data sheet XPSMC16ZPACK Technical Description Safety Functions ● Emergency stop monitoring with time delay: ○ 1 channel wiring, with automatic start. ○ 2 channel wiring, with start button. ● Emergency stop monitoring without time delay: ○ 1 channel wiring, with automatic start. ○ 2 channel wiring, with start button. ● Two-hand control. ● Guard monitoring: ○ with 1 limit switch. ○ with 2 limit switches. ○ with 2 limit switches, with guard locking. ● Guard monitoring for injection presses and blowing machines. ● Magnetic switch monitoring. ● Sensing mat monitoring. ● Light curtains monitoring: ○ Relay output type. ○ Solid-state output type. ● “Muting” function for light curtains. ● Zero speed detection. ● Dynamic monitoring of hydraulic valves on linear presses. ● Safety time delays. 7 ● Monitoring safety stop at top dead centre on eccentric press. ● Hydraulic press. ● Eccentric press. ● Enabling switching monitoring: ○ 2 contact type. ○ 3 contact type. Other functions: ● Foot switch monitoring ● Chain shaft breakage monitoring ● Position selector 8