Product data sheet XPSMP11123 Characteristics module XPS-MP - 2 independent functions - 24 V DC Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 720.00 USD Main Range of product Preventa Safety automation Product or component type Safety controller with pre-defined function Safety module name XPSMP Safety module application 2 independent functions Safety use category Category 4 maximum conforming to EN/IEC 60954-1 Type of start Automatic or unmonitored (configuration 1) Automatic or unmonitored (configuration 10) Automatic or unmonitored (configuration 11) Automatic or unmonitored (configuration 14) Automatic or unmonitored (configuration 3) Automatic or unmonitored (configuration 5) Automatic or unmonitored (configuration 7) Monitored (configuration 12) Monitored (configuration 13) Monitored (configuration 15) Monitored (configuration 2) Monitored (configuration 4) Monitored (configuration 6) Monitored (configuration 8) Monitored (configuration 9) Checks Configuration (configuration 10) Configuration (configuration 13) Configuration (configuration 3) Configuration (configuration 4) Configuration (configuration 5) Configuration (configuration 6) Configuration (configuration 9) Standards DIN V VDE 801 + A1 EN/IEC 60204-1 EN/IEC 60947-1 + A11 EN/IEC 60947-5-1 Product certifications BIA CSA UL [Us] rated supply voltage 24 V DC (- 20...20 %) Connections - terminals Captive screw clamp terminals: 0.14...0.75 mm², 2 wires flexible without cable end Captive screw clamp terminals: 0.14...0.75 mm², 2 wires solid without cable end Captive screw clamp terminals: 0.14...2.5 mm², 1 wire flexible without cable end Captive screw clamp terminals: 0.14...2.5 mm², 1 wire solid without cable end Jun 24, 2018 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Captive screw clamp terminals: 0.25...1 mm², 2 wires flexible with cable end, without bezel Captive screw clamp terminals: 0.25...1.5 mm², 1 wire flexible with cable end, with bezel Captive screw clamp terminals: 0.25...2.5 mm², 1 wire flexible with cable end, without bezel Captive screw clamp terminals: 0.5...1.5 mm², 2 wires flexible with cable end, with double bezel Safety level Can reach SIL 3 conforming to EN/IEC 62061 Can reach PL e/category 4 conforming to EN/ISO 13849-1 Complementary Function of module Configuration 0: functions disabled (factory setting) Configuration 1: emergency stop monitoring 1-channel wiring, category 2 Configuration 10: enabling grip switch monitoring (3-position switch), category 4 Configuration 11: sensing mat and edges monitoring, category 3 Configuration 12: sensing mat and edges monitoring, category 3 Configuration 13: relay output safety light curtain monitoring, category 4 Configuration 14: coded magnetic switch monitoring, category 4 Configuration 15: coded magnetic switch monitoring, category 4 Configuration 2: emergency stop monitoring 1-channel wiring, category 2 Configuration 3: emergency stop monitoring 2-channel wiring, or guard monitoring, category 4 Configuration 4: emergency stop monitoring 2-channel wiring, or guard monitoring, category 4 Configuration 5: emergency stop monitoring 2-channel wiring, or guard monitoring, category 4 Configuration 6: emergency stop monitoring 2-channel wiring, or guard monitoring, category 4 Configuration 7: emergency stop monitoring 2-channel wiring, or guard monitoring, category 4 Configuration 8: emergency stop monitoring 2-channel wiring, or guard monitoring, category 4 Configuration 9: guard monitoring for injection presses and blowing machines, category 4 Synchronisation time between inputs 0.5 s (configuration 13) 1.5 s (configuration 14) 1.5 s (configuration 15) 1.5 s (configuration 5) 1.5 s (configuration 6) 1.5 s (configuration 9) Unlimited (configuration 3) Unlimited (configuration 4) Unlimited (configuration 7) Unlimited (configuration 8) Power consumption in W <= 5 W Input protection type Internal, electronic [Uc] control circuit voltage 24 V Line resistance 100 Ohm 2000 m Number of safety circuits 3 NO relays per function (6 NO total), volt-free Number of additional circuits 3 solid state outputs Breaking capacity C300: holding 180 VA AC-15 relay output C300: inrush 1800 VA AC-15 relay output Breaking capacity 20 mA/24 V for static output circuit 1.5 A/24 V - L/R = 50 ms, DC-13 relay output Output thermal current 2 A for 1 output and 4 A for the other 2 outputs relay 3.3 A for all 3 outputs relay simultaneously 6 A for 1 output and 2 A for the other 2 outputs relay [Ith] conventional free air thermal <= 20 A current Associated fuse rating 4 A gG relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200 6 A fast blow relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200 Minimum output current 10 mA relay output Minimum output voltage 17 V relay output Response time on input open < 30 ms [Ui] rated insulation voltage 300 V, degree of pollution 2 conforming to EN/IEC 60947-5-1, DIN VDE 0110 parts 1 & 2 [Uimp] rated impulse withstand voltage 4 kV overvoltage category III conforming to EN/IEC 60947-5-1, DIN VDE 0110 parts 1 & 2 Local signalling 12 LEDs Mounting support 35 mm symmetrical DIN rail Depth 4.49 in (114 mm) Height 3.9 in (99 mm) Width 1.77 in (45 mm) Product weight 0.71 lb(US) (0.32 kg) 2 Environment IP degree of protection IP20 (terminals) IP40 (enclosure) Ambient air temperature for operation 14...131 °F (-10...55 °C) Ambient air temperature for storage -13...185 °F (-25...85 °C) Ordering and shipping details Category 22477 - SAFETY MODULES (PREVENTA) Discount Schedule SAF2 GTIN 00785901603429 Nbr. of units in pkg. 1 Package weight(Lbs) 0.70999999999999996 Returnability N Country of origin ID Contractual warranty Warranty period 18 months 3 Product data sheet XPSMP11123 Dimensions Drawings Dimensions 4 Product data sheet XPSMP11123 Connections and Schema Wiring Diagrams Refer to the Instruction Sheet To download the instruction sheet, follow below procedure: 1 Click on Download & Documents. 2 Click on Instruction sheet. 5 Product data sheet XPSMP11123 Technical Description Safety Functions ● Emergency stop monitoring, 1 channel wiring: ○ 1 channel Emergency stop, automatic or unmonitored start. ○ 1 channel Emergency stop, monitored start. ● Emergency stop monitoring, 2 channel wiring: ○ 2 channel Emergency stop, automatic or unmonitored start. ○ 2 channel Emergency stop, monitored start. ● Coded magnetic switch monitoring: ○ Automatic or unmonitored start, synchronization time = 1,5 s. ○ Monitored start, synchronization time = 1,5 s. ● Guard monitoring with start test: ○ Locking of guard with start test, automatic or unmonitored start. ○ Locking of guard with start test, monitored start. ● Guard monitoring with start test and synchronization time = 1,5 ms: ○ Locking of guard with start test, automatic or unmonitored start. ○ Locking of guard with start test, monitored start. ● Guard monitoring for injection press or blowing machine. ● Enabling switch monitoring, safety mat monitoring: ○ Enabling switch monitoring, with or without start-up preparation. ○ Safety mat monitoring, automatic or unmonitored start. ● Sensing mat monitoring, monitored start. ● Light curtain monitoring, monitored start, synchronization time = 0,5 s. 6