SCHNEIDER ELECTRIC ZB4BC44

Product data sheet ZB4BC44 Characteristics red Ø30 mushroom pushbutton head Ø22 spring return Product availability : Stock - Normally stocked in distribution facility Price* : 29.40 USD Main Range of product Harmony XB4 Product or component type Head for non-illuminated push-button Device short name ZB4 Bezel material Chromium plated metal Mounting diameter 0.87 in (22 mm) Sale per indivisible quantity 1 Head type Standard Shape of signaling unit head Round Type of operator Spring return Operator profile Red mushroom Ø 30 mm unmarked Complementary CAD overall width 1.18 in (30 mm) CAD overall height 1.18 in (30 mm) CAD overall depth 2.05 in (52 mm) Mechanical durability 5000000 cycles Electrical composition code C1 <= 9 contacts using single blocks in front mounting C2 <= 9 contacts using single and double blocks in front mounting C11 <= 3 contacts using single blocks in front mounting C15 1 contacts using single blocks in front mounting Environment Protective treatment TH Ambient air temperature for storage -40...158 °F (-40...70 °C) Ambient air temperature for operation -40...158 °F (-40...70 °C) Overvoltage category Class I conforming to IEC 60536 IP degree of protection IP69 IP66 conforming to IEC 60529 IP69K NEMA degree of protection NEMA 13 NEMA 4X Jun 24, 2018 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications IK degree of protection IK06 conforming to IEC 50102 Standards EN/IEC 60947-1 EN/IEC 60947-5-1 EN/IEC 60947-5-4 EN/IEC 60947-5-5 JIS C 4520 UL 508 CSA C22.2 No 14 Product certifications BV CSA DNV GL LROS (Lloyds register of shipping) RINA UL listed Vibration resistance 5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6 Shock resistance 30 gn (duration = 18 ms) half sine wave acceleration conforming to IEC 60068-2-27 50 gn (duration = 11 ms) half sine wave acceleration conforming to IEC 60068-2-27 Ordering and shipping details Category 22468 - PUSHBUTTONS,22MM(METAL) NEW Discount Schedule CS2 GTIN 00785901381945 Nbr. of units in pkg. 1 Package weight(Lbs) 0.16 Returnability Y Country of origin CZ Contractual warranty Warranty period 18 months 2 Product data sheet ZB4BC44 Dimensions Drawings Dimensions 3 Product data sheet ZB4BC44 Mounting and Clearance Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation) Connection by Screw Clamp Terminals or Plug-in Connectors or on Connection by Faston Connectors Printed Circuit Board (1) Diameter on finished panel or support (2) 40 mm min. / 1.57 in. min. (3) 30 mm min. / 1.18 in. min. +0.4 +0.016 (4) Ø 22.5 mm / 0.89 in. recommended (Ø 22.3 mm / 0.88 in. ) 0 0 (5) 45 mm min. / 1.78 in. min. (6) 32 mm min. / 1.26 in. min. 4 Product data sheet ZB4BC44 Mounting and Clearance Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection Panel Cut-outs (Viewed from Installer’s Side) A: 30 mm min. / 1.18 in. min. B: 40 mm min. / 1.57 in. min. Printed Circuit Board Cut-outs (Viewed from Electrical Block Side) Dimensions in mm A: 30 mm min. B: 40 mm min. 5 Dimensions in in. A: 1.18 in. min. B: 1.57 in. min. General Tolerances of the Panel and Printed Circuit Board The cumulative tolerance must not exceed 0.3 mm / 0.012 in: T1 + T2 = 0.3 mm max. Installation Precautions ● Minimum thickness of circuit board: 1.6 mm / 0.06 in. ● Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004 ° ● Orientation of body/fixing collar ZB4 BZ009: ± 2 30’ (excluding cut-outs marked a and b). ● Tightening torque of screws ZBZ 006: 0.6 N.m (5.3 lbf.in) max. ● Allow for one ZB4 BZ079 fixing collar/pillar and its fixing screws: ○ every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y). ○ with each selector switch head (ZB4 BD•, ZB4 BJ•, ZB4 BG•). The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5. (1) Panel (2) Printed circuit board 6 Mounting of Adapter (Socket) ZBZ 01• ● 1 2 elongated holes for ZBZ 006 screw access ● 2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ 01• ● 3 8 × Ø 1.2 mm / 0.05 in. holes ● 4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a) ● 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b) ● 6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ 01• Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ 01•. 7 Product data sheet ZB4BC44 Technical Description Electrical Composition Corresponding to Code C1 8 Product data sheet ZB4BC44 Technical Description Electrical Composition Corresponding to Code C2 9 Product data sheet ZB4BC44 Technical Description Electrical Composition Corresponding to Codes C9, C11, SF1 and SR1 10 Product data sheet ZB4BC44 Technical Description Electrical Composition Corresponding to Code C15 1 N/O 1 N/C 1 N/O + N/C or 1 N/O + N/O or 1 N/C + N/C 11 Product data sheet ZB4BC44 Technical Description Legend Single contact Double contact Light block Possible location 12