SCHNEIDER ELECTRIC ZB5AP1

Product data sheet ZB5AP1 Characteristics white projecting pushbutton head Ø22 spring return unmarked Product availability : Non-Stock - Not normally stocked in distribution facility Price* : 25.80 USD Main Range of product Harmony XB5 Product or component type Head for non-illuminated push-button Device short name ZB5 Product compatibility Not compatible with legend holder Bezel material Plastic Mounting diameter 0.87 in (22 mm) Head type Standard Sale per indivisible quantity 1 Shape of signaling unit head Round Type of operator Spring return Operator profile White projecting unmarked Operator additional information Clear boot Complementary CAD overall width 1.18 in (30 mm) CAD overall height 1.18 in (30 mm) CAD overall depth 1.38 in (35 mm) Product weight 0.03 lb(US) (0.014 kg) Mechanical durability 10000000 cycles Station name XALD 1...5 cut-outs XALK 2...5 cut-outs Electrical composition code C1 <= 9 contacts using single blocks in front mounting C2 <= 9 contacts using single and double blocks in front mounting C11 <= 3 contacts using single blocks in front mounting C15 1 contacts using single blocks in front mounting SF1 <= 3 contacts using single blocks in front mounting SR1 <= 3 contacts using single blocks in rear mounting Environment Protective treatment TH Ambient air temperature for storage -40...158 °F (-40...70 °C) Jun 24, 2018 1 Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications Ambient air temperature for operation -40...158 °F (-40...70 °C) Overvoltage category Class II conforming to IEC 60536 IP degree of protection IP69 conforming to IEC 60529 IP69K conforming to ISO 20653 IP66 conforming to IEC 60529 IP67 conforming to IEC 60529 NEMA degree of protection NEMA 13 NEMA 4X Resistance to high pressure washer 1015.26 psi (7000000 Pa) at 131 °F (55 °C),distance: 0.1 m IK degree of protection IK03 conforming to IEC 50102 Standards EN/IEC 60947-1 EN/IEC 60947-5-1 EN/IEC 60947-5-4 JIS C 4520 UL 508 CSA C22.2 No 14 Product certifications BV CSA DNV GL LROS (Lloyds register of shipping) RINA UL listed Shock resistance 30 gn (duration = 18 ms) half sine wave acceleration conforming to IEC 60068-2-27 50 gn (duration = 11 ms) half sine wave acceleration conforming to IEC 60068-2-27 Vibration resistance 5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6 Ordering and shipping details Category 22467 - PUSHBUTTONS,22MM(PLASTIC) NEW Discount Schedule CS2 GTIN 00785901387442 Nbr. of units in pkg. 1 Package weight(Lbs) 4.0000000000000001E-2 Returnability N Country of origin FR Contractual warranty Warranty period 18 months 2 Product data sheet ZB5AP1 Dimensions Drawings Dimensions a in mm a in in. ZB5AP•• 36.5 1.44 ZB5AP•S 33 1.30 ZB5AP•83 32 1.26 ZB5AP• 35 1.38 3 Product data sheet ZB5AP1 Mounting and Clearance Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation) Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board (1) Diameter on finished panel or support (2) For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended. +0.4 +0.016 (3) Ø22.5 mm recommended (Ø22.3 ) / Ø0.89 in. recommended (Ø0.88 in. ) 0 0 Connections a in mm a in in. b in mm b in in. By screw clamp terminals or plug-in connector 40 1.57 30 1.18 By Faston connectors 45 1.77 32 1.26 On printed circuit board 30 1.18 30 1.18 Detail of Lug Recess (1) Diameter on finished panel or support (2) For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended. +0.4 +0.016 (3) Ø22.5 mm recommended (Ø22.3 ) / Ø0.89 in. recommended (Ø0.88 in. ) 0 0 4 Product data sheet ZB5AP1 Mounting and Clearance Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection Panel Cut-outs (Viewed from Installer’s Side) A: 30 mm min. / 1.18 in. min. B: 40 mm min. / 1.57 in. min. Printed Circuit Board Cut-outs (Viewed from Electrical Block Side) Dimensions in mm A: 30 mm min. B: 40 mm min. 5 Dimensions in in. A: 1.18 in. min. B: 1.57 in. min. General Tolerances of the Panel and Printed Circuit Board The cumulative tolerance must not exceed 0.3 mm / 0.012 in.: T1 + T2 = 0.3 mm max. Installation Precautions ● Minimum thickness of circuit board: 1.6 mm / 0.06 in. ● Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004 ° ● Orientation of body/fixing collar ZB5AZ009: ± 2 30’ (excluding cut-outs marked a and b). ● Tightening torque of screws ZBZ006: 0.6 N.m (5.3 lbf.in) max. ● Allow for one ZB5AZ079 fixing collar/pillar and its fixing screws: ○ every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y). ○ with each selector switch head (ZB5AD•, ZB5AJ•, ZB5AG•). The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5. (1) Head ZB5AD• (2) Panel (2) Nut (4) Printed circuit board 6 Mounting of Adapter (Socket) ZBZ01• ● 1 2 elongated holes for ZBZ006 screw access ● 2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ01• ● 3 8 × Ø 1.2 mm / 0.05 in. holes ● 4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a) ● 5 1 elongated hole for aligning the printed circuit board (with cut-out marked b) ● 6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ01• Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ01•. 7 Product data sheet ZB5AP1 Technical Description Electrical Composition Corresponding to Code C1 8 Product data sheet ZB5AP1 Technical Description Electrical Composition Corresponding to Code C2 9 Product data sheet ZB5AP1 Technical Description Electrical Composition Corresponding to Codes C9, C11, SF1 and SR1 10 Product data sheet ZB5AP1 Technical Description Electrical Composition Corresponding to Code C15 1 N/O 1 N/C 1 N/O + N/C or 1 N/O + N/O or 1 N/C + N/C 11 Product data sheet ZB5AP1 Technical Description Legend Single contact Double contact Light block Possible location 12