SCHNEIDER ELECTRIC ZB6CA2

Product data sheet ZB6CA2 Characteristics black square flush pushbutton head Ø16 spring return unmarked Main Range of product Harmony XB6 Product or component Head for non-illuminated push-button type Device short name ZB6 Bezel material Plastic Mounting diameter 16 mm Sale per indivisible 1 quantity Shape of signaling unit Square head Type of operator Spring return Operator profile Black flush unmarked Complementary CAD overall width 18 mm CAD overall height 18 mm CAD overall depth 33 mm Product weight 0.016 kg Environment Protective treatment TC Ambient air temperature for storage -40...70 °C Ambient air temperature for operation -25...70 °C Class of protection against electric shock Class II conforming to IEC 61140 IP degree of protection IP65 conforming to IEC 60529 NEMA degree of protection NEMA 4X conforming to CSA C22.2 No 94 NEMA 4 conforming to CSA C22.2 No 94 NEMA 13 conforming to CSA C22.2 No 94 NEMA 4X conforming to UL 50 NEMA 4 conforming to UL 50 NEMA 13 conforming to UL 50 Standards EN/IEC 60947-1 EN/IEC 60947-5-1 EN/IEC 60947-5-5 JIS C 4520 JIS C 852 UL 508 CSA C22.2 No 14 Product certifications CCC CSA GOST UL Vibration resistance 5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6 +/- 3 mm (f = 2...500 Hz) conforming to IEC 60068-2-6 Shock resistance 50 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27 30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-27 Jun 24, 2018 1 The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. Product data sheet ZB6CA2 Dimensions Drawings Square Head for Illuminated or Non Illuminated Pushbutton Dimensions 2 Product data sheet ZB6CA2 Mounting and Clearance Panel Cut-out For Square or Circular Head Pushbuttons, Switches and Pilot Lights for Printed Circuit Board Connection Front Panel Cut-out (Viewed from Installer’s Side) 3 Printed Circuit Board Drillings (Viewed from Electrical Block Side) A 24 mm/0.94 in. minimum for rectangular heads, 18 mm/0.71 in. minimum for square or circular heads B 18 mm/0.71 in. minimum (1) 6 x Ø 1.1 mm / 6 x Ø 0.04 in. holes. 0 0 (2) 1 x Ø 2.6  mm / 1 x Ø 0.10 -  in. hole for locating pin, only when using socket adaptor ZB6Y010. -0.2 -0.008 0 0 (3) 1 x Ø 3.2  mm / 1 x Ø 0.13  in. hole for fixing of printed circuit board onto the front panel using body bracket ZB6Y011. -0.2 -0.008 This hole must be drilled on the left-hand side, when heads are positioned at the normal angle. Fit a body bracket ZB6Y011 every 72 mm/2.83 in. maximum for cut-outs on 24 mm/0.94 in. centres (rectangular heads) and 54 mm/2.13 in. maximum for cut-outs on 18 mm/0.71 in. centres (square or circular heads). General tolerances of the panel and printed circuit board: T1, T2: T1 + T2 = 0.3 mm/0.01 in. maximum. Installation precautions: Thickness of printed circuit board: 1.6 mm/0.06 in. minimum. Mounting with Body Bracket With socket adaptor ZB6Y010 (1) Head (2) Nut (3) Body (4) Body bracket (5) Contact block (6) Socket adaptor (7) Panel (8) Printed circuit 4 Direct mounting without socket adaptor ZB6Y010 (1) Head (2) Nut (3) Body (4) Body bracket (5) Contact block (6) Panel (7) Printed circuit 5