Fuse holder FEP https://www.schurter.com /PG02 Shock-Safe Fuseholder, 5 x 20 mm, Fingergrip See below: 250 VAC · 2.5 W / 6.3 A (VDE) · 500 VAC/DC · 10 A (UL/CSA) Approvals and Compliances Description Weblinks - Screw type fuse carrier pdf datasheet, html-datasheet, General Product Information, Packaging details, Distributor-Stock-Check, Detailed request for product, Microsite Technical Data Shock-Safe Category PC1 Soldering Methods Iron Soldering Profile Fuse-Link 5 x 20 mm Solderability 350 °C / 3 sec acc. to IEC 60068-2-20, Mounting Panel mount, Front Side Test Ta, method 2 Attachment Fixing Nut Resistance to Soldering Heat 350 °C / 10 sec acc. to IEC 60068-2-20, Terminal Solder or Quick-Connect 2.8 x 0.5 mm Test Tb, method 2 Rated Voltage 250 VAC (VDE), 500 VAC/DC (UL/CSA) Contact Resistance ≤ 10 mΩ at 20 mV Rated current 6.3 A (VDE), 10 A (UL/CSA) Dielectric Strength > 1 kV between life parts Rated Power Acceptance IEC 2.5 W / 6.3 A @ Ta 23 °C (50 Hz: 1 min) Admissible power acceptance at higher Impulse Withstand Voltage > 4 kV between life parts ambient temperature see derating cur- ves Insulation Resistance ≥ 20 MΩ between life parts (1000 VDC: 1 min) Degree of Protection IP 42 Overvoltage Category II acc. to IEC 60664-1 Protection Class Suitable for appliances with protection Pollution Degree 2 acc. to IEC 60664-1 class I acc. to IEC 61140 Admissible Torque on Fixing max 1.2 Nm Admissible Ambient Air Temp. -25 °C to 85 °C Nut Climatic Category 25/085/21 acc. to IEC 60068-1 Panel Thickness max 3 mm Material: Socket Thermoset, black, UL 94V-0 Material: Cap Thermoplastic Material: Terminals Tin-Plated Copper Alloy Unit Weight 6.1 g / 4.6 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking , Type, Rated Voltage, Rated current, Approvals Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: FEP Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 40043890 UL Approvals UL UL File Number: E39328 Fuses 1 0.5 Fuse holder FEP https://www.schurter.com /PG02 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to UL 4248-1 Fuseholder general requirements Designed according to CSA C22.2 no. 4248.1 Fuseholder general requirements Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White paperGlow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Dimension [mm] 35 mm 35 16.1 31 16 max. 3 max. 3 4 0.5 2.8 24 11 19.9 11 FEP 0031.1001 FEP 0031.1071 0 -0.1 12 2 Fuses 0 13-0.3 0 Ø15 12.7-0.1 SW 14 Ø15 SW 14 Fuse holder FEP https://www.schurter.com /PG02 Derating Curves 5x20 mm 2.5 2.0 I = 1.0 I n 1.5 I = 0.7 I n I = << I n 1.0 0.5 0.0 020406080 100 Ambient Air Temperature Ta °C All Variants Holder Cap Terminal Position End-Terminal Degree of Pro- Order Number tection l Fingergrip Solder 4.0 x 0.5 mm 30° to Fuse Axis IP 42 0031.1001 l Fingergrip Quick-Connect 2.8 x 0.5 mm 90° to Fuse Axis IP 42 0031.1071 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Bulk (100 pcs.) Packaging Unit The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed Fuses 3 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Admissible Power Acceptance in Watt 20.06.2018