Voltage Selector SWA1 (Frontpl) https://www.schurter.com /PG04 Voltage selector switch, 2 stages, serie-parallel, panel mounting Approvals and Compliances Description References - Voltage Selector , 2 stages Alternative: version for PCB mounting SWA2 (Print) - Series-parallel connections - Solder terminals Technical Data Ratings IEC: 6.3 A / 250 VAC; 50 Hz Solderability 350 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 2 ␣ UL: 6.3 A / 250 VAC; 60 Hz Resistance to Soldering Heat 350 °C / 10 sec acc. to IEC 60068-2-20, ␣ CSA: 6.3 A / 250 VAC; 60 Hz Test Tb, method 2 Mounting Panel Mount from front side Insulation Resistance > 10'000MΩ (500VDC; 1min) Fastening Screw-on mounting Contact Resistance < 10 mΩ at 20 mV Terminal Solder Dielectric Strength > 2kVAC between L-N Number of Stages 2 > 4kVAC between L/N-PE Lifetime 300 operating cycles (without load) (1min; 50Hz) Degree of Protection IP 40 Clearance and Creepage Di- > 3mm Protection Class Suitable for appliances with protection stance > 8mm between L/N-PE class II acc. to IEC 61140 Resistance to Vibration acc. to IEC 60068-2-6, test Fc Allowable Operation Tempe- -40 °C to 85 °C Panel Thickness S max 8.5 mm rature Climatic Category 25/85/21 acc. to IEC 60068-1 Material: Socket Thermoplastic, black, UL 94V-0 Weight 3.9 g Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: SWA1 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40040796 UL Approvals UL UL File Number: E72661 Product standards Product standards that are referenced Organization Design Standard Description Designed according to UL 508 Industrial control equipment Designed according to CSA C22.2 no. 14 Fuseholder general requirements Fuses 1 230V 5.5 Voltage Selector SWA1 (Frontpl) https://www.schurter.com /PG04 Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Dimension [mm] 25.8 mm Panel mounting hole ø15.2 0 ø12.7-0.1 M12.7x1.5 2.2x1.4 115V Diagrams A) 1 2 3 4 23 2 3 115V 230V 1 4 1 4 B) A) Power mains B) Internal contact arrangement for series-parallel connection 2 Fuses R1.2 1.6 max. 8.5 2.3 20.8 25.8 ±0.1 13.6 Voltage Selector SWA1 (Frontpl) https://www.schurter.com /PG04 All Variants Letterings Order Number Stage 1 Stufe 2 █ 110 220 0033.4501 115 220 0033.4502 █ 120 240 0033.4503 115 230 0033.4504 █ 50 Hz 60 Hz 0033.4508 LO HI 0033.4513 ␣ ␣ 0033.4514 0 1 0033.4518 █ A B 0033.4521 TEST RUN 0033.4524 █ Most Popular. Availability for all products can be searched real- time:https://www.schurter.com/en/Stock-Check/ Stock-Check-SCHURTER 100 Pcs Packaging Unit The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed Fuses 3 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 13.12.2017