Metal Line Switches MSM 16 https://www.schurter.com /PG70 Metal Switch Medium Stroke, Switching Voltage up to 250 VAC See below: Approvals and Compliances Description Characteristics - Momentary action switch available in version: Standard (ST), with Let- - Housing and actuator material: high-quality stainless steel tering (LE) and with Ring Illumination (RI) Assembly method: clip micro- - Variety of design options regarding size, colour, illumination, connec- switch into the saddle, secure switch using mounting nut tion or lettering - Equipped with flat-pin plugs to permit fast connection - Switching voltage from 30 VDC to 250 VAC, switching current from 0.1 A to 10 A Unique Selling Proposition - IP-Protection: IP 67 from front side to contact area, Micro-Switch is - Attractive tactile feedback available in versions IP 40 or IP 67 - High quality materials - for use in harsh environments (see technical data) - Long life span References - Homogeneous illumination Alternative: double-pole switch: MSM DP 22; MSM DP 30 Alternative: switch with latching function: MSM LA CS 19; MSM LA CS 22; MSM LA 19; MSM LA 22 Alternative: switch with backlighted illumination: MSM CS 16; MSM CS 19; MSM CS 22 Alternative: Other diameter MSM 19; MSM 22; MSM 30 Weblinks html-datasheet, General Product Information, CAD-Drawings, Product News, Detailed request for product Switches 1 Metal Line Switches MSM 16 https://www.schurter.com /PG70 Technical Data Electrical Data Mechanical Data Switching Function N.O., N.C., N.O./N.C. Actuating Force 4.5 N Number of Poles 1-pole Actuating Travel 1.0 mm Supply Voltage 24 VDC Ring Illumination Lifetime 1.5 million actuations Impulse Withstand Voltage 4 kV MSM ST / MSM LE Shock Protection IK 07 for ring illuminated variants, IK (ESD) 10 for non-illuminated variants ␣ 2 kV MSM RI Tightening Torque Plastic Nut max. 2 Nm Micro Switch 5 A / 125 VAC or 3 A / 250 VAC, IP40 Tightening Torque Stainless max. 10 Nm Steel Nut Contact Material Ag Climatical Data Switching Voltage max. 125 / 250 VAC Operating Temperature -25 to +85 °C Switching Current max. 5 / 3 A Storage Temperature -25 to +85 °C Rated Switching Capacity 750 W Protection Class IP 67 Lifetime 0.2 million actuations at Rated Swit- ching Capacity Switching Unit IP 40 Contact Resistance < 30 mΩ ␣ IP 67 optional Insulation Resistance > 100 MΩ Salt Spray Test (acc. to DIN 24 h / 48 h / 96 h Residence Time 50021-SS) Duration of Bounce < 5 ms Material Micro Switch 0,1 A / 30 VDC, IP40 Housings Stainless Steel Contact Material Au Actuator Stainless Steel Switching Voltage max. 30 VDC Switching Current max. 0.1 A Light Conductor (Point Illumi- PC nation) Rated Switching Capacity 3 W Illuminated Ring (Ring Illumi- PMMA Lifetime 0.2 million actuations at Rated Swit- nation) ching Capacity Seal Ring NBR70 Contact Resistance < 50 mΩ Switcher Collet PA Insulation Resistance > 100 MΩ Duration of Bounce < 5 ms Micro Switch for Electrical Rating 10 A / 250 VAC (Protection Class IP40) Contact Material Ag Switching Voltage max. 250 VAC Switching Current max. 10 A Rated Switching Capacity 2500 W Lifetime 0.05 million actuations at Rated Swit- ching Capacity Contact Resistance < 30 mΩ Insulation Resistance > 100 MΩ Duration of Bounce < 5 ms Micro Switch 5 A / 250 VAC, IP67 Switching Voltage max. 250 VAC Switching Current max. 5 Rated Switching Capacity 1250 W Lifetime 0.05 million actuations at Rated Swit- ching Capacity Micro Switch 0,1 A / 250 VAC, IP67 - on request Switching Voltage max. 250 VAC Switching Current max. 0.1 Rated Switching Capacity 25 W Lifetime 0.05 million actuations at Rated Swit- ching Capacity Micro Switch 10 A / 250 VAC, IP67 - on request Switching Voltage max. 250 VAC Switching Current max. 10 A Rated Switching Capacity 2500 W Lifetime 0.01 million actuations at Rated Swit- ching Capacity Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals 2 Switches Metal Line Switches MSM 16 https://www.schurter.com /PG70 Approvals Approval Reference Type: MSM 16 Approval Logo Certification Body Description Low Voltage Directive 2014/35/EU compliant following certificate numbers apply to micro switch VDE / ENEC Certificate Number (Omron): 40008425, 129246, 125256 UL UL / CSA File Number (Omron): E41515 VDE / ENEC Certificate Number (Marquardt): 097550 UL UL / CSA File Number (Marquardt): E41791 KEMA KEMA / ENEC File Number (Cherry): 2089323.01 UL UL / CSA File Number (Cherry): E23301 CQC CQC File Number (Marquardt): CQC13005090991 Product standards Product standards that are referenced Organization Design Standard Description Designed according to DIN EN 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 1054 UL standard for safety special-use switches Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Compliances The product complies with following Guide Lines Identification Details Initiator Description RoHS SCHURTER AG EU Directive RoHS 2011/65/EU REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Dimension [mm] MSM 16 ST MSM 16 LE D D 19 19 17,80 M16x1 17,80 M16x1 0,50 0,50 2,80 20 20 2,80 B B NC NO COM NC NO COM 12,80 12,80 Switches 3 33,40 1,75 max. 6mm 14 33,40 15,10 -0,05 1,75 max. 6mm 14 Metal Line Switches MSM 16 https://www.schurter.com /PG70 MSM RI ø 20 ø 19 15.1 M16x1 Verdrehsicherung anti-rotation protection O-Ring sealing Mutter (Kunststoff) nut (plastic) Versorgungsspannung Versorgungsspannung Beleuchtung (+) 0.5 Beleuchtung (-) supply voltage 2.8 2.8 0.5 supply voltage illumination (+) illumination (-) 20 Leuchtring illuminated ring NC NO COM Legend A = Illumination Area B = Actuating Area C = Width Across Flats D = Nut Tolerance Range Actuator Tolerance Range The mounting tolerance range of the actuator varies from 0.2 mm projection length and 0.2 mm short length to the housing edge. The slanting position of the actuator can range within this tolerance. Dimension MSM 16 ST MSM 16 LE, RI Drilling diagram 4 Switches 0.20 0.20 33.4 1.75 ø 12.7 max. 6 Betätigungsfläche actuator area 13.5 Metal Line Switches MSM 16 https://www.schurter.com /PG70 Assembly Instructions During assembly, the protruding bars of the holder should not be pressed together. I Housing II Flat Pin Terminal (Illumination) III Gasket IV Nut (Nut type see Dimensions) V Module Switching Contact Installation Instruction: 1.) Place the gasket accurately on the actuator housing. Then mount the actuator housing assembly into the panel. 2.) Tighten the screw nut according to the torque instructions. 3.) Clasp the module switching contact into the micro switch holder of the actuator housing. Installation information: 1.) The power supply and the configuration of the flat pin terminals have to be installed correctly for the illumination and micro switch function. 2.) Insulate the terminals as required. Fully insulated plug-in sleeves are recommended. 3.) Installation instructions according to VDE-standard DIN VDE 0100-100 or alternatively IEC 60354 standard. Diagrams MSM ST / MSM LE MSM RI D 2 D 3 D 1 D 4 COM NO NC Rv Rv COM NO NC Lettering The last three digits in the order number define the lettering: 000 No Lettering 001-074 Standard Lettering 101- Customized Lettering Lettering Colour of Laser Lettering Material Lettering Colour Stainless Steel black Filled letters Switches 5 Metal Line Switches MSM 16 https://www.schurter.com /PG70 Order Index Lettering Laser Marking 001 = A 021 = U 041 = ÷ 061 = EIN 002 = B 022 = V 042 = ✳ 062 = AUS 003 = C 023 = W 043 = = 063 = AUF 004 = D 024 = X 044 = # 064 = AB 005 = E 025 = Y 045 = ↔ 065 = ON 006 = F 026 = Z 046 = ↕ 066 = OFF 007 = G 027 = 0 047 = → 067 = UP 008 = H 028 = 1 048 = ← 068 = DOWN 009 = I 029 = 2 049 = ↓ 069 = HIGH 010 = J 030 = 3 050 = ↑ 070 = LOW 011 = K 031 = 4 051 = % 071 = ON/OFF 012 = L 032 = 5 052 = √ 072 = START 013 = M 033 = 6 053 = CTRL 073 = RESET 014 = N 034 = 7 054 = RETURN 074 = 015 = O 035 = 8 055 = SHIFT 075 = 016 = P 036 = 9 056 = LOCK 076 = 017 = Q 037 = + 057 = STOP 077 = 018 = R 038 = - 058 = ENTER 019 = S 039 = . 059 = BACK 020 = T 040 = x 060 = LINE All Variants Diameter Switching Switching Voltage Illumination, LED Housing Material, Actuator Material, Tor- Config. Code Order Number Current Torsion Protection sion Protection [mm] [A] [VAC/ VDC] █ 16 100 mA 30 VDC non-illuminated Stainless Steel ,no Stainless Steel ,no MSM 16 ST 1241.6611.1110000 16 5 / 3 A 125 / 250 VAC non-illuminated Stainless Steel ,no Stainless Steel ,no MSM 16 ST 1241.6611.1120000 █ 16 10 A 250 VAC non-illuminated Stainless Steel ,no Stainless Steel ,no MSM 16 ST 1241.6611.1130000 16 100 mA 30 VDC non-illuminated Stainless Steel ,yes Stainless Steel ,yes MSM 16 LE 1241.6612.1110074 16 5 / 3 A 125 / 250 VAC non-illuminated Stainless Steel ,yes Stainless Steel ,yes MSM 16 LE 1241.6612.1120000 16 100 mA 30 VDC Ring Illumination, red, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 16 RI red 3-102-618 █ 16 10 A 250 VAC Ring Illumination, red, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 16 RI red 3-102-620 █ 16 100 mA 30 VDC Ring Illumination, green, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 16 RI green 3-102-621 █ █ 16 10 A 250 VAC Ring Illumination, green, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 16 RI green 3-102-623 16 100 mA 30 VDC Ring Illumination, blue, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 16 RI blue 3-102-624 █ 16 10 A 250 VAC Ring Illumination, blue, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 16 RI blue 3-102-626 █ 16 100 mA 30 VDC Ring Illumination, yellow, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 16 RI yellow 3-102-627 █ █ 16 10 A 250 VAC Ring Illumination, yellow, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 16 RI yellow 3-102-629 █ 16 100 mA 30 VDC Ring Illumination, white, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 16 RI white 3-102-630 16 10 A 250 VAC Ring Illumination, white, 24 VDC Stainless Steel ,yes Stainless Steel ,yes MSM 16 RI white 3-102-632 █ Legend: Type: MSMST = Standard: not lettered LE = Lettering: lettered RI = Ring Illumination IP-Protection: IP 67 from front side to contact area, Micro-Switch is available in versions IP 40 or IP 67, see Technical Data Micro-Switch The MOQ for standard laser lettering on standard variants is 10 pieces. Customer-specific versions available on request. Special materials for use in salt and chlorinated environment on request. The nut with gasket and micro switch are enclosed in the box. █ Most Popular. 6 Switches Metal Line Switches MSM 16 https://www.schurter.com /PG70 Diameter Switching Switching Voltage Illumination, LED Housing Material, Actuator Material, Tor- Config. Code Order Number Current Torsion Protection sion Protection [mm] [A] [VAC/ VDC] Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 10 in box with insert or packed in air cushion bags Packaging unit - Actuating elements in ESD safe packaging - Screw nuts and sealing rings in a bag (enclosd in the box) - Micro switches in a bag (enclosed in the box) Accessories Description Installation Wrench MSM 16 Installation Wrench Power Supply Power Supply IP42 for LED- and Illumination applications indoor 90~264 VAC => 24 VDC 0.34 A 8 W The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed Switches 7 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 29.05.2018