Power Entry Modules with Line Filter KFC https://www.schurter.com /PG06 IEC Appliance Inlet C14 with Filter, Fuseholder 1- or 2-pole (5x20 mm or 6.3x32 mm), optional Voltage Se- lector (step switch) with voltage selector without voltage selector C14 Approvals and Compliances 70° C Description Characteristics - Panel Mount : - All single elements are already wired Screw-on mounting from front side - The fuse drawer "Fingergrip" can be removed by hand - Suitable for use in equipment according to IEC/UL 60950 - 4 Functions : Suitable for use in medical equipment according to IEC/UL 60601-1 Appliance Inlet Protection class I , Fuseholder with interchangeable fuse drawer for Fuse-links 5x20 mm or 6.3x32 mm , with or without Other versions on request voltage selector (step switch) , Line filter in standard and medical ver- - Variant with notch for V-Lock mating Cordsets sion References - Quick connect terminals 4.8 x 0.8 mm Alternative: version without line filter KEC Unique Selling Proposition Alternative: Standard version - Multifunctional power entry module Weblinks - Suitable for various fuses pdf datasheet, html-datasheet, General Product Information, Distributor- - Highly resistant since fully potted Stock-Check, Accessories, Detailed request for product, Microsite - V-Lock cord retaining Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz appliance inlet/-outlet C14 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold Ratings UL/CSA 1 - 10 A @ Ta 40 °C / 125 VAC; 60 Hz conditions) pin-temperature 70 °C, 10 A, Leakage Current standard < 0.5 mA (250 V / 60 Hz) Protection Class I medical < 5 µA (250 V / 60 Hz) Fuseholder 1 or 2 pole, Shocksafe category PC2 Dielectric Strength > 1.7 kVDC between L-N acc. to IEC 60127-6, > 2.7 kVDC between L/N-PE for fuse-links 5 x 20 or 6.3 x 32 mm Test voltage (2 sec) Rated Power Acceptance @ 5 x 20: 2.5 W (1 pole)/ 2 W (2-pole) per Allowable Operation Tempe- -25 °C to 85 °C Ta 23 °C pole rature 6.3 x 32: 3.15 W (1 pole)/ 2.5 W (2-pole) Climatic Category 25/085/21 acc. to IEC 60068-1 per pole IP-Protection from front side IP 40 acc. to IEC 60529 Power Acceptance @ Ta > Admissible power acceptance at higher Protection Class Suitable for appliances with protection 23°C ambient temperature see derating cur- class I acc. to IEC 61140 ves Terminal Quick connect terminals 4.8 x 0.8 mm Voltage Selector optional, step, 3 pos. Panel Thickness S Screw: max 8 mm Line Filter Standard and Medical Version, IEC Mounting screw torque max 0.5 Nm 60939, UL 1283, CSA C22.2 no. 8 Material: Housing Thermoplastic, black, UL 94V-0 Technical Details MTBF > 1'700'000 h acc. to MIL-HB-217 F Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals EMC Products 1 Power Entry Modules with Line Filter KFC https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: KFC Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40004665 (FKO, FKP, FKQ, FKR) UL Approvals UL UL File Number: E72928 (FKO, FKP, FKQ, FKR) Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 EMC Products Power Entry Modules with Line Filter KFC https://www.schurter.com /PG06 Dimension [mm] 55 30 M3/ø 3.6 2 R 6 R 4.5 4.8x0.8 0 -0.2 R 3 57.4 R 3.1 2.8 +0.2 -0.1 69.2 28.6 27.3 Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacitance R [MΩ] [A] L [mH] CX [nF] CY [nF] 1 Standard Version 2 x 10 68 2.2 - 2 Standard Version 2 x 4 68 2.2 - 4 Standard Version 2 x 1.5 68 2.2 - 6 Standard Version 2 x 0.8 68 2.2 - 10 Standard Version 2 x 0.3 68 2.2 - 1 Medical Version (M5) 2 x 10 68 - 1 2 Medical Version (M5) 2 x 4 68 - 1 4 Medical Version (M5) 2 x 1.5 68 - 1 6 Medical Version (M5) 2 x 0.8 68 - 1 10 Medical Version (M5) 2 x 0.3 68 - 1 10 Standard and Medical Version 2 x 0.3 68 2.2 1 Diagrams Standard version Medical version (M5) with voltage selector with voltage selector 3 3 X) X) 2 2 L L 1 1 L1 F1 L1 F1 1) 2) 1) 2) Cy PE’ R PE’ PE PE Cx Cx F2 F2 L2 L2 Cy X) X) 5 5 N N x) external connection to be made by the customer x) external connection to be made by the customer 1) Line 1) Line 2) Load 2) Load EMC Products 3 58.3 50 230 40.7 ø 3.2 ø 6.3x90° +0.2 42.2 -0.1 ±0.15 50 Power Entry Modules with Line Filter KFC https://www.schurter.com /PG06 Derating Curves Fuses Fuses Fuses Fuses 5 x 20 mm (1-pole) 5 x 20 mm (2-pole, per pole) 6.3 x 32 mm (1-pole) 6.3 x 32 mm (2-pole, per pole) 2.5 2.0 3.15 2.5 2.0 2.0 2.5 1.5 I = 1.0 I I = 1.0 I n n I = 1.0 In 2.0 I = 1.0 In 1.5 1.5 I = 0.7 I I = 0.7 I n I = 0.7 I I = 0.7 I n n n 1.0 1.5 I = << In I = << In 1.0 I = << In I = << I 1.0 n 1.0 0.5 0.5 0.5 0.5 0.0 0.0 0.0 0.0 020406080100 020406080 100 020406080 100 020406080 100 Ambient air temperature T °C Ambient air temperature T °C Ambient air temperature T °C Ambient air temperature T °C a a a a Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version 1 A 2 A 4 A 6 A 10 A Medical version (M5) 1 A 2 A 4 A 6 A 10 A All Variants Rated Current Filter-Type Fuseholder Voltage Selector V-Lock Order Number [A] 1 Standard Version 1-pole - 4303.5011 2 Standard Version 1-pole - 4303.5012 4 Standard Version 1-pole - 4303.5013 4 EMC Products Admissible power acceptance in Watt Admissible power acceptance in Watt Admissible power acceptance in Watt Admissible power acceptance in Watt Power Entry Modules with Line Filter KFC https://www.schurter.com /PG06 Rated Current Filter-Type Fuseholder Voltage Selector V-Lock Order Number [A] 6 Standard Version 1-pole - 4303.5014 10 Standard Version 1-pole - 4303.5015 1 Standard Version 1-pole 3 pos. 4303.5031 2 Standard Version 1-pole 3 pos. 4303.5032 4 Standard Version 1-pole 3 pos. 4303.5033 6 Standard Version 1-pole 3 pos. 4303.5034 10 Standard Version 1-pole 3 pos. 4303.5035 1 Standard Version 2-pole - 4303.5001 █ 2 Standard Version 2-pole - 4303.5002 4 Standard Version 2-pole - 4303.5003 6 Standard Version 2-pole - 4303.5004 █ 10 Standard Version 2-pole - 4303.5005 █ 1 Standard Version 2-pole 3 pos. 4303.5021 2 Standard Version 2-pole 3 pos. 4303.5022 4 Standard Version 2-pole 3 pos. 4303.5023 █ 6 Standard Version 2-pole 3 pos. 4303.5024 █ █ 10 Standard Version 2-pole 3 pos. 4303.5025 1 Medical Version (M5) 2-pole 3 pos. 4303.5221 2 Medical Version (M5) 2-pole 3 pos. 4303.5223 4 Medical Version (M5) 2-pole 3 pos. 4303.5225 █ █ 6 Medical Version (M5) 2-pole 3 pos. 4303.5227 l 10 Medical Version (M5) 2-pole 3 pos. 4303.5209.21 10 Medical Version (M5) 2-pole 3 pos. 4303.5229 █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 10 Pcs Required Accessory Description Fusedrawer 3 Fusedrawer for Fuse Links 5x20 mm resp. 6.3x32 mm Fingergrip, 5 x 20, 2-pole, Voltage Selector 4303.2014.00 Fingergrip, 5 x 20, 2-pole, Voltage Selector, 100, 120, 220, 240 4303.2014.01 Fingergrip, 5 x 20, 2-pole, Voltage Selector, 110, 150, 220 4303.2014.02 Fingergrip, 5 x 20, 2-pole, Voltage Selector, 110, 220 4303.2014.03 ... EMC Products 5 Power Entry Modules with Line Filter KFC https://www.schurter.com /PG06 Accessories Assorted Covers Rear Cover 0859.0072 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to KFC Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to KFC ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power Cord further types to KFC The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 6 EMC Products to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 02.12.2017