Power Entry Modules with Line Filter FKHD https://www.schurter.com /PG06 IEC Appliance Inlet C14 with Filter 2-Stage, Fuseholder 1-pole, Line Switch 2-pole C14 See below: Approvals and Compliances 70° C Description Characteristics - Panel Mount : - Compact design with optimal shielding Screw-on mounting from front side - All single elements are already wired - Plug removal necessary for fuse-link replacement - 4 Functions : - 2-stage line filter with increased attenuation Appliance Inlet Protection class I , Fuseholder for fuse-links 5 x 20 mm With EMC-shield 1-pole , Line Switch 2-pole , Line-filter in standard version , 2 positions - Suitable for use in equipment according to IEC/UL 60950 - Quick connect terminals 6.3 x 0.8 mm Suitable for use in medical equipment according to IEC/UL 60601-1 Other versions on request - Medical version M80 Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz appliance inlet/-outlet C14 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold Ratings UL/CSA 1 - 10 A @ Ta 40 °C / 125 VAC; 60 Hz conditions) pin-temperature 70 °C, 10 A, Leakage Current standard < 0.5 mA (250 V / 60 Hz) Protection Class I Dielectric Strength > 1.7 kVDC between L-N Fuseholder 1-pole, Shocksafe category PC2 acc. to > 2.7 kVDC between L/N-PE IEC 60127-6, Test voltage (2 sec) for fuse-links 5 x 20 mm Allowable Operation Tempe- -25 °C to 85 °C Rated Power Acceptance @ 5 x 20: 1.6 W (1 pole) rature Ta 23 °C Climatic Category 25/085/21 acc. to IEC 60068-1 Power Acceptance @ Ta > Admissible power acceptance at higher IP-Protection from front side IP 40 acc. to IEC 60529 23°C ambient temperature see derating cur- Protection Class Suitable for appliances with protection ves class I acc. to IEC 61140 Line Switch 2-pole, non-illuminated, acc. to IEC Terminal Quick connect terminals 6.3 x 0.8 mm 61058-1 Panel Thickness S Screw: max 8 mm Technical Details Mounting screw torque max 0.5 Nm Line Filter Standard Version, IEC 60939, UL 1283, Material: Housing Thermoplastic, black, UL 94V-0 CSA C22.2 no. 8 Technical Details MTBF > 1'200'000 h acc. to MIL-HB-217 F Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: FKHD Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40004665 UL Approvals UL UL File Number: E72928 EMC Products 1 Power Entry Modules with Line Filter FKHD https://www.schurter.com /PG06 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 Dimensions [mm] Case 45 ±0.15 40 49 40 R1 6.3x0.8 M3 3.5 ±0.5 14 29.5 28 R4 61.3 5.5 ±0.5 ±0.5 28.7 50 50 67 2 EMC Products ±0.5 65 63 ø 3.2 ø 6.3x90° 60.4 +0.5 61–0.2 Power Entry Modules with Line Filter FKHD https://www.schurter.com /PG06 Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacity Capacity R [MΩ] [A] L [mH] CX [nF] Cy1 [nF] Cy2 [nF] 1 Standard Version 2 x 10 68 1.5 1 1 2 Standard Version 2 x 4 68 1.5 1 1 4 Standard Version 2 x 1.5 68 1.5 1 1 6 Standard Version 2 x 0.8 68 1.5 1 1 10 Standard Version 2 x 0.3 68 1.5 1 1 1 Medical Version (M5) 2 x 10 68 - - 1 2 Medical Version (M5) 2 x 4 68 - - 1 4 Medical Version (M5) 2 x 1.5 68 - - 1 6 Medical Version (M5) 2 x 0.8 68 - - 1 10 Medical Version (M5) 2 x 0.3 68 - - 1 Diagrams Standard version Medical version (M5) N N’ L1 L1 N N’ L1 L1 1) PE R 2) PE’ Cy1 Cy2 R Cx Cx PE PE’ 1) 2) Cx Cx F1 L2 L2 F1 L2 L2 L L’ Cy1 Cy2 L L’ 1) Line 1) Line 2) Load 2) Load Derating Curves 1-pole 1.6 1.4 1.2 I = 1.0 I 1.0 n I = 0.7 In 0.8 I = << I n 0.6 0.4 0.2 0.0 020406080 100 Ambient air temperature T °C a - - - - 50Ω differential mode _____ 50Ω common mode Attenuation Loss Standard version 1 A 2 A 4 A 6 A 10 A EMC Products 3 Admissible power acceptance in Watt Power Entry Modules with Line Filter FKHD https://www.schurter.com /PG06 Medical version (M5) 1 A 2 A 4 A 6 A 10 A All Variants Type Rated Current Filter-Type Fuseholder Line Switch Housings Material: Housing Order Number [A] FKHD 1 Standard Version 1-pole 2-pole 45 Aluminum 4304.5041 FKHD 2 Standard Version 1-pole 2-pole 45 Aluminum 4304.5042 FKHD 4 Standard Version 1-pole 2-pole 45 Aluminum 4304.5043 FKHD 6 Standard Version 1-pole 2-pole 45 Aluminum 4304.5044 FKHD 10 Standard Version 1-pole 2-pole 45 Aluminum 4304.5045 FKHD 1 Medical Version (M5) 1-pole 2-pole 45 Aluminum 4304.5046 FKHD 2 Medical Version (M5) 1-pole 2-pole 45 Aluminum 4304.5047 FKHD 4 Medical Version (M5) 1-pole 2-pole 45 Aluminum 4304.5048 FKHD 6 Medical Version (M5) 1-pole 2-pole 45 Aluminum 4304.5049 FKHD 10 Medical Version (M5) 1-pole 2-pole 45 Aluminum 4304.5050 FKHD 1 Standard Version 1-pole 2-pole 45 Nickel plated steel 4304.5001 █ FKHD 2 Standard Version 1-pole 2-pole 45 Nickel plated steel 4304.5002 FKHD 4 Standard Version 1-pole 2-pole 45 Nickel plated steel 4304.5003 FKHD 6 Standard Version 1-pole 2-pole 45 Nickel plated steel 4304.5004 █ FKHD 10 Standard Version 1-pole 2-pole 45 Nickel plated steel 4304.5005 █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 10 Pcs Packaging unit Accessories Description Assorted Covers Rear Cover 0859.0074 4 EMC Products Power Entry Modules with Line Filter FKHD https://www.schurter.com /PG06 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to FKHD Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to FKHD ... The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed EMC Products 5 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 11.01.2018