Power entry modules without line filter 6762 https://www.schurter.com /PG05 IEC Appliance Inlet C14 or C18 with Line Switch 1- or 2-pole and Fuseholder 1-pole C14 C18 Approvals and Compliances 70° C 70° C Description Characteristics - Panel Mount : - Line switch non-illuminated or illuminated Snap-in or screw-on mounting , from front side Appliance Inlet , pro- Weblinks tection class I or II , Fuseholder for fuse-links 5 x 20 mm , Line Switch pdf datasheet, html-datasheet, General Product Information, Distributor- - Snap-in version with 1- or 2-pole line switch available Stock-Check, Accessories, Detailed request for product - Screw-on version only with 2-pole line switch - Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. - Solder terminals or quick connect terminals Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1 UL 498, CSA C22.2 no. 42 (for cold Ratings UL/CSA 10 A / 250 VAC; 60 Hz conditions) pin-temperature 70 °C, 10 A, Dielectric Strength > 1.5 kVAC between L-N Protection Class I or II > 3 kVAC between L/N-PE Fuseholder 1-pole, acc. to IEC 60127-6, (1 min/50 Hz) for fuse-links 5 x 20 mm Allowable Operation Tempe- -25 °C to 70 °C Power Acceptance @ Ta > Admissible power acceptance at higher rature 23°C ambient temperature see derating cur- IP-Protection from front side IP 40 acc. to IEC 60529 ves Insulation cover Suitable for appliances with protection Line Switch Rocker switch 1 or 2 pole, non-illumi- class I or II acc. to IEC 61140 nated or illuminated black, acc. to IEC Terminal Solder terminals or quick connect ter- 61058-1 minals Technical Details Panel Thickness S Screw Mounting screw torque max 0.5 Nm Snap-in1.0 - 1.5/2.0 - 2.5 mm Material: Housing PA6, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6762 Approval Logo Certificates Certification Body Description SEMKO Approvals SEMKO Certificate Number: SE/09137-2A UL Approvals UL UL File Number: E93617 CSA Approvals CSA CSA Certification Record: 27324 CSA Approvals CSA CCC File Number: 27324 Connectors 1 Power entry modules without line filter 6762 https://www.schurter.com /PG05 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. 2 Connectors R 4 Power entry modules without line filter 6762 https://www.schurter.com /PG05 Dimensions [mm] Screw-on mounting ± 0.10 27.5 50 27.1 18 8.3 ø 3.4/ M3 L N 28 25.6 3 40 40 max. 27.5 5 Snap-in mounting ± 0.10 27.1 27.4 24.7 L N 10 30 27.3 Panel thickness X max. 29 3.3 + _0.1 1.0 - 1.5 mm 61.3 mm + _0.1 1.6 - 2.0 mm 61.9 mm Connectors 3 ø 6.3 ø 3.25 R 3 R 3 1 63 13.4 65 13.7 65 90˚ 3.2 58.6 3.2 58.6 X ± 0.10 59 Power entry modules without line filter 6762 https://www.schurter.com /PG05 Derating Curves Fuses 5 x 20 mm (1-pole) 2.5 2.0 I = 1.0 I n 1.5 I = 0.7 I n I = << I n 1.0 0.5 0.0 020406080 100 Ambient air temperature T °C a Config. Code 6762|-|H|-|A|B|C|N|-|D|-|E|G|O|P| The characters are placeholders for the correspondingly keys of selections from the key tables. Terminal Ground Configuration 6762|-| H |-|A|B|C|N|-|D|-|E|G|O|P| = Type key Type Configuration without terminal 0 key solder terminal 1 protection class II B long solder terminal (L = 8.5 mm) 3 protection class I X Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (6.3 x 0.8 mm) 9 Symbols similar as in table A 6762|-|H|-| A |B|C|N|-|D|-|E|G|O|P| = Terminals 6762|-|H|-|A|B|C| N |-|D|-|E|G|O|P| = Terminal Fuseholder Terminal L Configuration key Terminal Fuseholder Configuration key solder terminal 1 solder terminal 1 Blade terminal (4.8 x 0.8 mm) 8 long solder terminal (L = 8.5 mm) 3 6762|-|H|-|A|B|C|N|-| D |-|E|G|O|P| = Color Blade terminal (4.8 x 0.8 mm) 8 Color Configuration key Black A Blade terminal (6.3 x 0.8 mm) 9 6762|-|H|-|A|B|C|N|-|D|-| E |G|O|P| = Style 6762|-|H|-|A| B |C|N|-|D|-|E|G|O|P| = Terminals Style Configuration Terminal N Configuration key key flange with countersunk holes 1 solder terminal 1 flange with through holes 2 long solder terminal (L = 8.5 mm) 3 snap-in standard type 3 Blade terminal (4.8 x 0.8 mm) 8 insert type 5 Blade terminal (6.3 x 0.8 mm) 9 Symbols similar as in table A 6762|-|H|-|A|B|C|N|-|D|-|E| G |O|P| = Dimension S 6762|-|H|-|A|B| C |N|-|D|-|E|G|O|P| = Terminals 4 Connectors Admissible power acceptance in Watt Power entry modules without line filter 6762 https://www.schurter.com /PG05 Dimension "S" Configuration key 6762|-|H|-|A|B|C|N|-|D|-|E|G|O| P | = Switches 00 Switches Configuration 1 The dimension "S" is displayed in ( / mm). This information is also valid for the 10 key order code dead cover 1 unipolar switch, 4,8mm blade terminal, black rocker 2 6762|-|H|-|A|B|C|N|-|D|-|E|G| O |P| = Features unipolar switch, solder terminal, black rocker 3 Features Configuration bipolar switch, 4,8mm blade terminal, black rocker 4 key bipolar switch, solder terminals, black rocker 5 dead cover 1 bipolar switch, 4,8mm blade terminal, rocker red illuminated 6 holder for 1 fuse (text legible, when inlet on top) 2 bipolar switch, solder terminal, rocker red illuminated 7 holder for 1 fuse (text legible, when inlet on bottom) 3 bipolar switch, 4,8mm blade terminals, rocker green illuminated 8 bipolar switch, solder terminals, rocker green illuminated 9 All Variants Type Terminal L Terminal N Terminal Terminal Fu- Style Features Switches Config. Code Order Number Ground seholder protection Blade terminal Blade terminal without ter- Blade terminal flange with holder for 1 bipolar switch, 6762-B-8808-A-10024 4304.6049 class II (4.8 x 0.8 mm) (4.8 x 0.8 mm) minal (4.8 x 0.8 mm) countersunk fuse (text legi- 4,8mm blade holes ble, when inlet terminal, black on top) rocker protection Blade terminal Blade terminal without ter- Blade terminal snap-in stan- holder for 1 unipolar 6762-B-8808-A-30022 4304.6050 class II (4.8 x 0.8 mm) (4.8 x 0.8 mm) minal (4.8 x 0.8 mm) dard type fuse (text legi- switch, 4,8mm ble, when inlet blade terminal, on top) black rocker protection Blade terminal Blade terminal without ter- Blade terminal snap-in stan- holder for 1 bipolar switch, 6762-B-8808-A-30024 4304.6051 class II (4.8 x 0.8 mm) (4.8 x 0.8 mm) minal (4.8 x 0.8 mm) dard type fuse (text legi- 4,8mm blade ble, when inlet terminal, black on top) rocker protection solder terminal solder terminal solder terminal solder terminal flange with holder for 1 dead cover 6762-X-1111-A-10021 4304.6052 class I countersunk fuse (text legi- holes ble, when inlet on top) protection solder terminal solder terminal solder terminal solder terminal flange with holder for 1 bipolar switch, 6762-X-1111-A-10024 4304.6053 class I countersunk fuse (text legi- 4,8mm blade █ holes ble, when inlet terminal, black on top) rocker protection solder terminal solder terminal solder terminal solder terminal flange with holder for 1 bipolar switch, 6762-X-1111-A-10025 4304.6054 class I countersunk fuse (text legi- solder termi- holes ble, when inlet nals, black on top) rocker protection solder terminal solder terminal solder terminal solder terminal flange with holder for 1 bipolar switch, 6762-X-1111-A-10034 4304.6055 class I countersunk fuse (text legi- 4,8mm blade holes ble, when inlet terminal, black on bottom) rocker protection long solder long solder long solder solder terminal snap-in stan- holder for 1 bipolar switch, 6762-X-3331-A-30025 4304.6056 class I terminal (L = terminal (L = terminal (L = dard type fuse (text legi- solder termi- 8.5 mm) 8.5 mm) 8.5 mm) ble, when inlet nals, black on top) rocker protection Blade terminal Blade terminal Blade terminal Blade terminal flange with holder for 1 dead cover 6762-X-8888-A-10021 4304.6057 class I (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) countersunk fuse (text legi- holes ble, when inlet on top) protection Blade terminal Blade terminal Blade terminal Blade terminal flange with holder for 1 bipolar switch, 6762-X-8888-A-10024 4304.6058 class I (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) countersunk fuse (text legi- 4,8mm blade █ holes ble, when inlet terminal, black on top) rocker protection Blade terminal Blade terminal Blade terminal Blade terminal flange with holder for 1 bipolar switch, 6762-X-8888-A-10026 4304.6059 class I (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) countersunk fuse (text legi- 4,8mm blade holes ble, when inlet terminal, on top) rocker red illuminated protection Blade terminal Blade terminal Blade terminal Blade terminal flange with holder for 1 bipolar switch, 6762-X-8888-A-10028 4304.6060 class I (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) countersunk fuse (text legi- 4,8mm blade holes ble, when inlet terminals, on top) rocker green illuminated protection Blade terminal Blade terminal Blade terminal Blade terminal flange with holder for 1 bipolar switch, 6762-X-8888-A-10034 4304.6061 class I (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) countersunk fuse (text legi- 4,8mm blade holes ble, when inlet terminal, black on bottom) rocker protection Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan- holder for 1 dead cover 6762-X-8888-A-30021 4304.6062 class I (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type fuse (text legi- ble, when inlet on top) Connectors 5 Power entry modules without line filter 6762 https://www.schurter.com /PG05 Type Terminal L Terminal N Terminal Terminal Fu- Style Features Switches Config. Code Order Number Ground seholder protection Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan- holder for 1 unipolar 6762-X-8888-A-30022 4304.6063 class I (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type fuse (text legi- switch, 4,8mm ble, when inlet blade terminal, on top) black rocker protection Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan- holder for 1 bipolar switch, 6762-X-8888-A-30024 4304.6064 class I (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type fuse (text legi- 4,8mm blade █ ble, when inlet terminal, black on top) rocker protection Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan- holder for 1 bipolar switch, 6762-X-8888-A-30025 4304.6065 class I (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type fuse (text legi- solder termi- ble, when inlet nals, black on top) rocker protection Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan- holder for 1 bipolar switch, 6762-X-8888-A-30026 4304.6066 class I (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type fuse (text legi- 4,8mm blade ble, when inlet terminal, on top) rocker red illuminated protection Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan- holder for 1 bipolar switch, 6762-X-8888-A-30028 4304.6067 class I (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type fuse (text legi- 4,8mm blade ble, when inlet terminals, on top) rocker green illuminated protection Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan- holder for 1 bipolar switch, 6762-X-8888-A-30036 4304.6068 class I (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type fuse (text legi- 4,8mm blade ble, when inlet terminal, on bottom) rocker red illuminated protection Blade terminal Blade terminal Blade terminal solder terminal snap-in stan- holder for 1 unipolar 6762-X-9991-A-30022 4304.6069 class I (6.3 x 0.8 mm) (6.3 x 0.8 mm) (6.3 x 0.8 mm) dard type fuse (text legi- switch, 4,8mm ble, when inlet blade terminal, on top) black rocker protection Blade terminal Blade terminal Blade terminal Blade terminal flange with holder for 1 bipolar switch, 6762-X-9998-A-10024 4304.6070 class I (6.3 x 0.8 mm) (6.3 x 0.8 mm) (6.3 x 0.8 mm) (4.8 x 0.8 mm) countersunk fuse (text legi- 4,8mm blade holes ble, when inlet terminal, black on top) rocker protection Blade terminal Blade terminal Blade terminal Blade terminal flange with holder for 1 bipolar switch, 6762-X-9998-A-10026 4304.6071 class I (6.3 x 0.8 mm) (6.3 x 0.8 mm) (6.3 x 0.8 mm) (4.8 x 0.8 mm) countersunk fuse (text legi- 4,8mm blade holes ble, when inlet terminal, on top) rocker red illuminated protection Blade terminal Blade terminal Blade terminal Blade terminal snap-in stan- holder for 1 bipolar switch, 6762-X-9998-A-30024 4304.6072 class I (6.3 x 0.8 mm) (6.3 x 0.8 mm) (6.3 x 0.8 mm) (4.8 x 0.8 mm) dard type fuse (text legi- 4,8mm blade ble, when inlet terminal, black on top) rocker protection Blade terminal Blade terminal Blade terminal solder terminal snap-in stan- holder for 1 bipolar switch, 6762-X-8881-A-30024 4304.6120 class I (4.8 x 0.8 mm) (4.8 x 0.8 mm) (4.8 x 0.8 mm) dard type fuse (text legi- 4,8mm blade ble, when inlet terminal, black on top) rocker The listet variants should be available from stock Other versions on request www.schurter.com/contact █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 50 Pcs 6 Connectors Power entry modules without line filter 6762 https://www.schurter.com /PG05 Accessories Description Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover Mating Outlets/Connectors Category / Description Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to 6762 ... Interconnection Cord Overview complete Cord Sets 10 A, Interconnection, 2.0 m, IEC H05VV-F3G1.0, black 6007.0204 Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0212 Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0214 Interconnection Cord further types to 6762 Power Supply Cord Overview complete Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0224 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0214 Cord Sets 10 A, United Kingdom, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6044.0215 Power Supply Cord further types to 6762 ... Power Supply or Interconnection Cord Overview complete Cord Sets 10 A, United Kingdom, 2.0 m, Connector IEC H05VV-F3G1.0, black 6044.0204 Power Supply or Interconnection Cord further types to 6762 Connectors 7 Power entry modules without line filter 6762 https://www.schurter.com /PG05 Mating Outlets/Connectors shuttered Power Cord Overview complete Power cord with IEC connector C17, V-Lock, straight VAC17KS Power Cord further types to 6762 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 8 Connectors to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 01.12.2017