Power entry modules without line filter 6765 https://www.schurter.com /PG05 IEC Appliance Inlet C14 or C18 with Line Switch 2 pole and Fuseholder 1- or 2-pole C14 C18 Approvals and Compliances 70° C 70° C Description Characteristics - Panel Mount : - Line switch non-illuminated or illuminated Screw-on version from front or rear side , Appliance Inlet , protection References class I or II , Fuseholder for fuse-links 5 x 20 mm , Line Switch 2-pole Alternative: version with line filter FKID - Meets the requirements of IEC 60335-1 for appliances in unattended Weblinks use. This includes the enhanced requirements of glow wire tests acc. pdf datasheet, html-datasheet, General Product Information, Distributor- to IEC 60695-2-12 and -13. Stock-Check, Accessories, Detailed request for product - Solder terminals or quick connect terminals Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1 UL 498, CSA C22.2 no. 42 (for cold Ratings UL/CSA 10 A / 250 VAC; 60 Hz conditions) pin-temperature 70 °C, 10 A, Dielectric Strength > 1.5 kVAC between L-N Protection Class I or II > 3 kVAC between L/N-PE Fuseholder 1 or 2 pole, acc. to IEC 60127-6, (1 min/50 Hz) for fuse-links 5 x 20 mm Allowable Operation Tempe- -25 °C to 70 °C Power Acceptance @ Ta > Admissible power acceptance at higher rature 23°C ambient temperature see derating cur- IP-Protection from front side IP 20 acc. to IEC 60529 ves Insulation cover Suitable for appliances with protection Line Switch Rocker switch 2-pole, non-illuminated class I or II acc. to IEC 61140 or illuminated black, acc. to IEC Terminal Solder terminals or quick connect ter- 61058-1 minals Technical Details Material: Housing PA6, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6765 Approval Logo Certificates Certification Body Description SEMKO Approvals SEMKO Certificate Number: SE/09137-1A UL Approvals UL UL File Number: E93617 CSA Approvals CSA CSA Certification Record: 27324 CSA Approvals CSA CCC File Number: 27324 Connectors 1 ø 3.2 R 3 Power entry modules without line filter 6765 https://www.schurter.com /PG05 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Dimensions [mm] +0.2 27.2 - 0 50 21.527 28 3 40 40 5 Length of the terminal please find at the order code configuration table 2 Connectors R 3 65 63 58 +0.2 58.2 - 0 Power entry modules without line filter 6765 https://www.schurter.com /PG05 Derating Curves 1-pole 2-pole 2.0 1.6 1.4 1.5 1.2 I = 1.0 I I = 1.0 I n n 1.0 I = 0.7 I I = 0.7 I n n 1.0 0.8 I = << I I = << I n n 0.6 0.5 0.4 0.2 0.0 0.0 020406080 100 020406080 100 Ambient air temperature T °C Ambient air temperature T °C a a Config. Code 6765|-|H|-|A|B|C|N|-|D|-|E|G|O|P| The characters are placeholders for the correspondingly keys of selections from the key tables. Terminal Fuseholder Configuration 6765|-| H |-|A|B|C|N|-|D|-|E|G|O|P| = Type key Type Configuration solder terminal 1 key protection class II B 6765|-|H|-|A|B|C|N|-| D |-|E|G|O|P| = Color protection class I X Color Configuration key Black A 6765|-|H|-| A |B|C|N|-|D|-|E|G|O|P| = Terminals Terminal L Configuration key 6765|-|H|-|A|B|C|N|-|D|-| E |G|O|P| = Style connection to fuse holder B Style Configuration key 6765|-|H|-|A| B |C|N|-|D|-|E|G|O|P| = Terminals flange with countersunk holes 1 Terminal N Configuration key 6765|-|H|-|A|B|C|N|-|D|-|E| G |O|P| = Dimension S short solder terminal (L = 4.8 mm) 2 long solder terminal (L = 8.5 mm) 3 Dimension "S" Configuration key Blade terminal (4.8 x 0.8 mm) 8 00 Blade terminal (6.3 x 0.8 mm) 9 1 The dimension "S" is displayed in ( / mm). This information is also valid for the connection to fuse holder B 10 order code Symbols similar as in table A 6765|-|H|-|A|B|C|N|-|D|-|E|G| O |P| = Features 6765|-|H|-|A|B| C |N|-|D|-|E|G|O|P| = Terminals Features Configuration Terminal Ground Configuration key key dead cover 1 without terminal 0 holder for 1 or 2 fuses (text legible, when inlet on top) 4 short solder terminal (L = 4.8 mm) 2 holder for 1 or 2 fuses (text legible, when inlet on bottom) 5 long solder terminal (L = 8.5 mm) 3 Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (6.3 x 0.8 mm) 9 Symbols similar as in table A 6765|-|H|-|A|B|C|N|-|D|-|E|G|O| P | = Switches 6765|-|H|-|A|B|C| N |-|D|-|E|G|O|P| = Terminal Fuseholder Connectors 3 Admissible power acceptance in Watt Admissible power acceptance in Watt per pole Power entry modules without line filter 6765 https://www.schurter.com /PG05 Switches Configuration Switches Configuration key key not used 0 bipolar switch, 4,8mm blade terminal, rocker red illuminated 6 dead cover 1 bipolar switch, solder terminal, rocker red illuminated 7 bipolar switch, 4,8mm blade terminal, black rocker 4 bipolar switch, 4,8mm blade terminals, rocker green illuminated 8 bipolar switch, solder terminals, black rocker 5 bipolar switch, solder terminals, rocker green illuminated 9 All Variants Type Terminal L Terminal N Terminal Ground Features Switches Config. Code V-Lock Order Number protection class I connection to fuse connection to fuse short solder termi- holder for 1 or 2 not used 6765-X-BB21-A-10040 4304.6078 holder holder nal (L = 4.8 mm) fuses (text legible, when inlet on top) protection class I connection to fuse connection to fuse short solder termi- holder for 1 or 2 bipolar switch, 4,8mm 6765-X-BB21-A-10044 4304.6079 holder holder nal (L = 4.8 mm) fuses (text legible, blade terminal, black █ when inlet on top) rocker protection class I connection to fuse connection to fuse short solder termi- holder for 1 or 2 bipolar switch, solder 6765-X-BB21-A-10045 4304.6080 holder holder nal (L = 4.8 mm) fuses (text legible, terminals, black rocker when inlet on top) protection class I connection to fuse connection to fuse short solder termi- holder for 1 or 2 bipolar switch, 4,8mm 6765-X-BB21-A-10054 4304.6081 holder holder nal (L = 4.8 mm) fuses (text legible, blade terminal, black when inlet on rocker bottom) protection class I connection to fuse connection to fuse short solder termi- holder for 1 or 2 bipolar switch, solder 6765-X-BB21-A-10055 4304.6082 holder holder nal (L = 4.8 mm) fuses (text legible, terminals, black rocker when inlet on bottom) protection class I connection to fuse connection to fuse Blade terminal (4.8 holder for 1 or 2 not used 6765-X-BB81-A-10040 4304.6085 holder holder x 0.8 mm) fuses (text legible, when inlet on top) protection class I connection to fuse connection to fuse Blade terminal (4.8 holder for 1 or 2 bipolar switch, 4,8mm 6765-X-BB81-A-10044 4304.6087 █ holder holder x 0.8 mm) fuses (text legible, blade terminal, black when inlet on top) rocker protection class I connection to fuse connection to fuse Blade terminal (4.8 holder for 1 or 2 bipolar switch, 4,8mm 6765-X-BB81-A-10046 4304.6088 holder holder x 0.8 mm) fuses (text legible, blade terminal, rocker when inlet on top) red illuminated protection class I connection to fuse connection to fuse Blade terminal (4.8 holder for 1 or 2 bipolar switch, 4,8mm 6765-X-BB81-A-10048 4304.6089 holder holder x 0.8 mm) fuses (text legible, blade terminals, rocker when inlet on top) green illuminated protection class I connection to fuse connection to fuse Blade terminal (4.8 holder for 1 or 2 bipolar switch, 4,8mm 6765-X-BB81-A-10054 4304.6090 holder holder x 0.8 mm) fuses (text legible, blade terminal, black █ when inlet on rocker bottom) protection class I connection to fuse connection to fuse Blade terminal (4.8 holder for 1 or 2 bipolar switch, 4,8mm 6765-X-BB81-A-10058 4304.6091 holder holder x 0.8 mm) fuses (text legible, blade terminals, rocker when inlet on green illuminated bottom) protection class I connection to fuse connection to fuse Blade terminal (6.3 holder for 1 or 2 bipolar switch, 4,8mm 6765-X-BB91-A-10044 4304.6092 holder holder x 0.8 mm) fuses (text legible, blade terminal, black █ when inlet on top) rocker protection class I connection to fuse connection to fuse Blade terminal (6.3 holder for 1 or 2 bipolar switch, solder 6765-X-BB91-A-10045 4304.6093 holder holder x 0.8 mm) fuses (text legible, terminals, black rocker when inlet on top) protection class I connection to fuse connection to fuse Blade terminal (6.3 holder for 1 or 2 bipolar switch, 4,8mm 6765-X-BB91-A-10046 4304.6094 holder holder x 0.8 mm) fuses (text legible, blade terminal, rocker when inlet on top) red illuminated protection class I connection to fuse connection to fuse Blade terminal (6.3 holder for 1 or 2 bipolar switch, 4,8mm 6765-X-BB91-A-10054 4304.6095 holder holder x 0.8 mm) fuses (text legible, blade terminal, black when inlet on rocker bottom) protection class I connection to fuse connection to fuse without terminal holder for 1 or 2 not used 6765-X-BB01-A-10040 4304.6122 holder holder fuses (text legible, when inlet on top) protection class I connection to fuse connection to fuse Blade terminal (6.3 holder for 1 or 2 bipolar switch, 4,8mm 6765-X-BB91-A-10048 4304.6153 holder holder x 0.8 mm) fuses (text legible, blade terminals, rocker when inlet on top) green illuminated protection class I connection to fuse connection to fuse short solder termi- holder for 1 or 2 not used 6765-X-BB21-A-10050 4304.6203 holder holder nal (L = 4.8 mm) fuses (text legible, when inlet on bottom) protection class I connection to fuse connection to fuse short solder termi- holder for 1 or 2 bipolar switch, 4,8mm 6765-X-BB21-A-10048 4304.6215 holder holder nal (L = 4.8 mm) fuses (text legible, blade terminals, rocker when inlet on top) green illuminated The listet variants should be available from stock Other versions on request www.schurter.com/contact █ Most Popular. 4 Connectors Power entry modules without line filter 6765 https://www.schurter.com /PG05 Type Terminal L Terminal N Terminal Ground Features Switches Config. Code V-Lock Order Number Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 50 Pcs Packaging unit Accessories Description Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover Mating Outlets/Connectors Category / Description Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to 6765 ... Interconnection Cord Overview complete Cord Sets 10 A, Interconnection, 2.0 m, IEC H05VV-F3G1.0, black 6007.0204 Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0212 Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0214 Interconnection Cord further types to 6765 Connectors 5 Power entry modules without line filter 6765 https://www.schurter.com /PG05 Category / Description Power Supply Cord Overview complete Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0224 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0214 Cord Sets 10 A, United Kingdom, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6044.0215 Power Supply Cord further types to 6765 ... Power Supply or Interconnection Cord Overview complete Cord Sets 10 A, United Kingdom, 2.0 m, Connector IEC H05VV-F3G1.0, black 6044.0204 Power Supply or Interconnection Cord further types to 6765 Mating Outlets/Connectors shuttered Power Cord Overview complete Power cord with IEC connector C17, V-Lock, straight VAC17KS Power Cord further types to 6765 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 6 Connectors to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 01.12.2017