Power entry modules without line filter 6766 https://www.schurter.com /PG05 IEC Appliance Inlet C14, with Line Switch 2-pole, Voltage Selector and Fuseholder 1or 2-pole C14 Approvals and Compliances 70° C Description Characteristics - Panel Mount : - With voltage selector and line switch Screw-on version from front or rear side , Appliance Inlet , Protection References class I , Voltage Selector , Line Switch 2-pole Last order date: 30.06.2017 - Solder terminals or quick connect terminals Last delivery date: 30.09.2017 Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C14 acc. to IEC 60320-1 UL 498, CSA C22.2 no. 42 (for cold Ratings UL/CSA 10 A / 250 VAC; 60 Hz conditions) pin-temperature 70 °C, 10 A, Dielectric Strength > 1.5 kVAC between L-N Protection Class I > 3 kVAC between L/N-PE Fuseholder 1 or 2 pole, acc. to IEC 60127-6, (1 min/50 Hz) for fuse-links 5 x 20 mm Allowable Operation Tempe- -25 °C to 70 °C Power Acceptance @ Ta > Admissible power acceptance at higher rature 23°C ambient temperature see derating cur- IP-Protection from front side IP 20 acc. to IEC 60529 ves Insulation cover Suitable for appliances with protection Line Switch Rocker switch 2-pole, non-illuminated class I acc. to IEC 61140 or illuminated black, acc. to IEC Terminal Solder terminals or quick connect ter- 61058-1 minals Technical Details Material: Housing PA6, black, UL 94V-0 Voltage Selector Step switch, 2 positions Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6766 Approval Logo Certificates Certification Body Description UL Approvals UL UL File Number: E88880 CSA Approvals CSA CSA Certification Record: 1084381 CSA Approvals CSA CCC File Number: 1084381 Connectors 1 PHASE-OUT R <2 ø 3.2 R 3 Power entry modules without line filter 6766 https://www.schurter.com /PG05 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Dimensions [mm] +0.2 50 24.2 52.5 27.3 - 0 110-120V 2 28 540 40 Length of the terminal please find at the order code configuration table Config. Code 6766|-|H|-|A|B|C|N|-|D|-|E|G|O|P| The characters are placeholders for the correspondingly keys of selections from the key tables. 2 Connectors R 3 PHASE-OUT 65 1 59 63 +0.2 59.1 - 0 220-240V Power entry modules without line filter 6766 https://www.schurter.com /PG05 6766|-| H |-|A|B|C|N|-|D|-|E|G|O|P| = Type 6766|-|H|-|A|B|C| N |-|D|-|E|G|O|P| = Terminal Fuseholder Type Configuration key Terminal Fuseholder Configuration key protection class I X PCB-terminal standard (additional solder terminal) 4 6766|-|H|-|A|B|C|N|-| D |-|E|G|O|P| = Color 6766|-|H|-| A |B|C|N|-|D|-|E|G|O|P| = Terminals Color Configuration Terminal L Configuration key key Black A short solder terminal (L = 4.8 mm) 2 6766|-|H|-|A|B|C|N|-|D|-| E |G|O|P| = Style long solder terminal (L = 8.5 mm) 3 Style Configuration key Blade terminal (2.8 x 0.8 mm) 7 flange with countersunk holes 1 Blade terminal (4.8 x 0.8 mm) 8 6766|-|H|-|A|B|C|N|-|D|-|E| G |O|P| = Dimension S Dimension "S" Configuration key Blade terminal (6.3 x 0.8 mm) 9 00 connection to switch C 1 The dimension "S" is displayed in ( / mm). This information is also valid for the 10 order code 6766|-|H|-|A| B |C|N|-|D|-|E|G|O|P| = Terminals 6766|-|H|-|A|B|C|N|-|D|-|E|G| O |P| = Features Terminal N Configuration key Features Configuration key short solder terminal (L = 4.8 mm) 2 voltage selector with 1 fuse 6 long solder terminal (L = 8.5 mm) 3 voltage selector with 2 fuses 7 Blade terminal (2.8 x 0.8 mm) 7 Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (6.3 x 0.8 mm) 9 connection to switch C 6766|-|H|-|A|B|C|N|-|D|-|E|G|O| P | = Switches Symbols similar as in table A Switches Configuration key 6766|-|H|-|A|B| C |N|-|D|-|E|G|O|P| = Terminals not used 0 Terminal Ground Configuration dead cover 1 key bipolar switch, 4,8mm blade terminal, black rocker 4 short solder terminal (L = 4.8 mm) 2 bipolar switch, solder terminals, black rocker 5 long solder terminal (L = 8.5 mm) 3 bipolar switch, 4,8mm blade terminal, rocker red illuminated 6 Blade terminal (2.8 x 0.8 mm) 7 bipolar switch, solder terminal, rocker red illuminated 7 Blade terminal (4.8 x 0.8 mm) 8 bipolar switch, 4,8mm blade terminals, rocker green illuminated 8 Blade terminal (6.3 x 0.8 mm) 9 bipolar switch, solder terminals, rocker green illuminated 9 Symbols similar as in table A Connectors 3 PHASE-OUT PHASE-OUT Power entry modules without line filter 6766 https://www.schurter.com /PG05 All Variants Type Terminal L Terminal N Terminal Ground Features Switches Config. Code V-Lock Order Number protection class I connection to connection to long solder termi- voltage selector not used 6766-X-CC34-A-10070 4304.6096 switch switch nal (L = 8.5 mm) with 2 fuses protection class I connection to connection to long solder termi- voltage selector bipolar switch, 4,8mm 6766-X-CC34-A-10074 4304.6097 switch switch nal (L = 8.5 mm) with 2 fuses blade terminal, black rocker protection class I connection to connection to long solder termi- voltage selector bipolar switch, solder 6766-X-CC34-A-10075 4304.6098 switch switch nal (L = 8.5 mm) with 2 fuses terminals, black rocker protection class I connection to connection to long solder termi- voltage selector bipolar switch, solder 6766-X-CC34-A-10079 4304.6099 switch switch nal (L = 8.5 mm) with 2 fuses terminals, rocker green illuminated protection class I connection to connection to Blade terminal (2.8 voltage selector bipolar switch, 4,8mm 6766-X-CC74-A-10074 4304.6100 █ switch switch x 0.8 mm) with 2 fuses blade terminal, black rocker protection class I connection to connection to Blade terminal (4.8 voltage selector not used 6766-X-CC84-A-10070 4304.6101 switch switch x 0.8 mm) with 2 fuses protection class I connection to connection to Blade terminal (4.8 voltage selector bipolar switch, 4,8mm 6766-X-CC84-A-10076 4304.6102 switch switch x 0.8 mm) with 2 fuses blade terminal, rocker red illuminated protection class I connection to connection to Blade terminal (6.3 voltage selector not used 6766-X-CC94-A-10070 4304.6103 switch switch x 0.8 mm) with 2 fuses protection class I connection to connection to Blade terminal (6.3 voltage selector bipolar switch, 4,8mm 6766-X-CC94-A-10074 4304.6104 switch switch x 0.8 mm) with 2 fuses blade terminal, black rocker The listet variants should be available from stock Other versions on request www.schurter.com/contact █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 50 Pcs Packaging unit Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to 6766 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to 6766 ... 4 Connectors PHASE-OUT Power entry modules without line filter 6766 https://www.schurter.com /PG05 Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power Cord further types to 6766 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed Connectors 5 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. PHASE-OUT PHASE-OUT 01.12.2017