Cord Connectors (rewireable) 8101 https://www.schurter.com /PG07 IEC Connector C15, Rewireable, Straight C15 See below: Approvals and Compliances 120° C Description References - Connector : We recommend for new applications the type 4781 Screwing cable terminal , Weblinks - 1 Function : pdf datasheet, html-datasheet, General Product Information, Distributor- Pin temperature 120 °C , Protection class I , Cable Stock-Check, Accessories, Detailed request for product - Note: cable guard has to be ordered separately, mating cable guards please find under accessories Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C15 acc. to IEC 60320-1 UL 498, CSA C22.2 no. 42 (For hot Ratings UL/CSA 15 A / 250 VAC; 60 Hz conditions) pin-temperature 120 °C, Dielectric Strength > 3 kVAC between L-N 10 A, Protection Class I > 1.5 kVAC between L/N-PE (1 min/50 Hz) Allowable Operation Tempe- -25 °C to 120 °C rature IP-Protection from front side IP 20 acc. to IEC 60529 Insulation cover Suitable for appliances with protection class I acc. to IEC 61140 Terminal Screw clamps Material: Housing PA6, black or grey, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 8101 Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 40008187 CSA Approvals CSA CSA Certification Record: 1612079 METI Approvals METI Japan Electrical Safety and Environment technology Laboratories Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Connectors 1 Cord Connectors (rewireable) 8101 https://www.schurter.com /PG07 Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Dimensions [mm] 22 55 20 18.5 Config. Code 8101|-|H|-|A|B|C|0-|D|-|E|J| The characters are placeholders for the correspondingly keys of selections from the key tables. Terminal N Configuration 8101|-| H |-|A|B|C|0-|D|-|E|J| = Type key Type Configuration screw terminal A key Symbols similar as in table A protection class I X 8101|-|H|-|A|B| C |0-|D|-|E|J| = Terminals Terminal Ground Configuration 8101|-|H|-| A |B|C|0-|D|-|E|J| = Terminals key Terminal L Configuration screw terminal A key Symbols similar as in table A screw terminal A 8101|-|H|-|A|B|C|0-| D |-|E|J| = Color 8101|-|H|-|A| B |C|0-|D|-|E|J| = Terminals 2 Connectors 29.5 Cord Connectors (rewireable) 8101 https://www.schurter.com /PG07 Color Configuration Style Configuration key key Black A for cord assembly 8 Grey B 8101|-|H|-|A|B|C|0-|D|-|E| J | = Condition Condition Configuration 8101|-|H|-|A|B|C|0-|D|-| E |J| = Style key assembled 1 disassembled 2 All Variants Terminals L / N Terminal Ground Color Condition Config. Code Order Number screw terminal screw terminal Black assembled 8101-X-AAA0-A-81 4310.0029 █ screw terminal screw terminal Grey assembled 8101-X-AAA0-B-81 4310.0030 █ The listet variants should be available from stock Other versions on request www.schurter.com/contact █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Max. torque for screws: Terminals: 0.5 Nm, Cable clamps: 0.8 Nm, Cover: 0.8 Nm Packaging unit 50 Pcs Accessories Description Cable Guard KT14 PVC Cable Guard for rewireable connectors Mating Inlets/Plugs Category / Description Appliance Inlet Overview complete 6100-3, Mounting: Screw, Solder terminals or quick connect terminals, Appliance Inlet: IEC C14 6100-3 6100-4, Mounting: Snap-in, Solder terminals or quick connect terminals, Appliance Inlet: IEC C14 6100-4 6102-3, Mounting: Screw, Solder terminals or quick connect terminals, Appliance Inlet: IEC C18 6102-3 6102-5, Mounting: Snap-in, Solder terminals or quick connect terminals, Appliance Inlet: IEC C18 6102-5 G-Stecker, Mounting: Appliance Inlet : IEC C14 Without fuse holder 6150 Appliance Inlet further types to 8101 ... Distribution Unit Overview complete Distribution Unit for Snap-in Mounting with 1 IEC Appliance Inlet C14 and 1 Appliance Outlet F 0712 Distribution Unit with 1 IEC Appliance Inlet C14 and 2 Appliance Outlets F, Shuttered 4741 Distribution Unit with 1 IEC Appliance Inlet C14 and 4 Appliance Outlets F 4747 Distribution Unit with 1 IEC Appliance Inlet C14 or Power Cord, 4, 5 or 6 IEC Appliance Outlets F and Extra Components 4740 EMC Power Strip with Line Filter FLBB Distribution Unit further types to 8101 Connectors 3 Cord Connectors (rewireable) 8101 https://www.schurter.com /PG07 Category / Description IEC Inlet Filter Overview complete GRF2, Mounting: Rear Side, With EMC-shield and without line filter, 10 A, Plug Connector, Appliance Inlet: IEC C14, GRF2 Suitable for appliances with protection class I 5110, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Without fuse holder: 10 A, Thermoplastic 5110 Appliance Inlet: IEC C14, prewired, Suitable for appliances with protection class I KFS, Mounting: Screw, Front Side, Filter: Standard Version, Without fuse holder: 10 A, Appliance Inlet: IEC C14, pre- KFS wired IEC Inlet Filter further types to 8101 Plug Overview complete IEC Plug E, Cord Connector (Rewireable), Straight, max. cable Diameter 8.5 mm 4732 IEC Plug E, Cord Connector (Rewireable), Straight, max. Cable Diameter 10 mm 4735 IEC Plug E, Cord Connector (Rewireable), Straight 9009 IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 8.5 mm 4733 IEC Plug E, Cord Connector (Rewireable), Angled, max. Cable Diameter 10 mm 4736 Plug further types to 8101 ... Power Entry Module Overview complete DD11, Mounting: Screw-on mounting, Rocker switch: non-illuminated or illuminated 2-pole, Quick connect terminals 4.8 x 0.8 mm, Appliance Inlet: IEC C14, With or without protection cover, Fuse holder: 1 or 2 pole, Suitable for appli- DD11 ances with protection class I DD21, Mounting: Screw-on mounting Rear Side, Rocker switch: non-illuminated or illuminated 2-pole, additional quick DD21 connect 4.8 x 0.8 mm Appliance Inlet: IEC C14, Fuse holder: 1 or 2 pole DC11, Mounting: Screw, Rocker switch: non-illuminated or illuminated 1 or 2 pole, Quick connect terminals 4.8 x 0.8 DC11 mm, Appliance Inlet: IEC C14, Without fuse holder: Suitable for appliances with protection class I or II KEB1, Mounting:Screw, Quick connect terminals 4.8 x 0.8 mm, Without fuse holder: Rocker switch, non-illuminated or KEB1 illuminated, red, 1-pole, Appliance Inlet: IEC C14, 250 VAC, prewired, Suitable for appliances with protection class I KEB2, Mounting:Screw, Quick connect terminals 4.8 x 0.8 mm, Without fuse holder: Rocker switch, non-illuminated or KEB2 illuminated, 2-pole, Appliance Inlet: IEC C14, 250 VAC, prewired, Suitable for appliances with protection class I Power Entry Module further types to 8101 ... Power Entry Module with line filter Overview complete DD14, Mounting: Screw-on mounting, Front Side, Filter, Standard and Medical Version, Fuse holder:1 or 2 pole, 10 A, DD14 Rocker switch: 2-pole, non-illuminated Appliance Inlet: IEC C14, prewired KFB1, Mounting: Screw, Front Side, Filter: Standard Version, Without fuse holder: 10 A, Rocker switch: 1-pole, Appli- KFB1 ance Inlet: IEC C14, prewired KFB2, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Without fuse holder: 10 A, Rocker switch: KFB2 2-pole, Appliance Inlet: IEC C14, prewired DC12, Mounting: Screw, Front-/Rear-Side, Filter, Standard and Medical Version, Without fuse holder:10 A, Rocker DC12 switch: 1 or 2 pole, non-illuminated or illuminated Appliance Inlet: IEC C14, prewired DC22 Mounting: Screw, Rear Side, PCB, 10 A, Filter: Standard and Medical Version, Without fuse holder: Rocker switch: DC22 1 or 2 pole, non-illuminated or illuminated, Appliance Inlet: IEC C14, Suitable for appliances with protection class I Power Entry Module with line filter further types to 8101 ... The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 4 Connectors to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 27.02.2018