Thermal (T- and TA-Line) T13-211 https://www.schurter.com /PG17_20 Circuit Breaker for Equipment thermal, Threaded neck type, Reset type, Quick connect terminals See below: Approvals and Compliances Description Applications - Threaded neck type - Power supplies - Thermal circuit breaker - Uninterruptible power supply - 1-pole - Power tools - Reset type - Household appliances - Wide current range Weblinks - High breaking capacity pdf datasheet, html-datasheet, General Product Information, Distributor- - Quick connect terminals 6.3 x 0.8 mm Stock-Check, Detailed request for product, Product News Unique Selling Proposition - Compact design - Positively trip-free release - Available with cover - Different mounting possibilities Technical Data Rated Voltage AC 240/277 V: 50/60 Hz, see approbations Overload IEC: min. 40 trips @ 6 x Ir, cos φ 0.6 Rated Voltage DC 28 V ␣ UL / CSA: min. 50 trips Rated current range AC 0.05 - 30 A @ 1.5 x Ir, cos φ 0.75 Conditional short circuit ca- IEC: Inc, PC1, AC 240 V: 1 kA Allowable Operation Temp. -5 °C to 60 °C pacity Vibration Resistance ± 1.5 mm @ 10 - 60 Hz Short circuit capacity Icn at In < 7 A/240 VAC : 8 x In acc. to IEC 60068-2-6, test Fc ␣ at In ≥ 7 A/240 VAC : 400 A 10 G @ 60 - 500 Hz ␣ AC/DC 28 V : 400 A acc. to IEC 60068-2-6, test Fc Degree of Protection from front side IP 40 acc. to IEC 60529 Shock Resistance 100 G / 6 ms Dielectric Strength 50 Hz: 1.5 kV acc. to IEC 60068-2-27, test Ea Impulse 1.2/50 μs: > 2.5 kV Tripping Type Thermal Insulation Resistance 500 VDC > 100 MΩ Actuation Type Reset type Endurance typical 2 x Ir: 3000 switching cycles Weight ca. 10 g Endurance minimum Reset type AC : 2 x Ir , cos φ 0.6 : DC : 2 x Ir , L/R = 2 - 3 ms : 50 switching cycles Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: T13 Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 123283 UL Approvals UL UL File Number: E71572 CSA Approvals CSA CSA Certification Record: LR 37712 CQC Approvals CQC CCC Certificate Number: 2012010307571195 Circuit Breakers 1 Thermal (T- and TA-Line) T13-211 https://www.schurter.com /PG17_20 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60934 Circuit-breakers for equipment (CBE) Designed according to UL 1077 Standard for Supplementary Protectors for Use in Electrical Equipment Designed according to CSA C22.2 No. 235 Supplementary Protectors Designed according to GB 17701 Circuit-breaker for equipment Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Dimension [mm] T13-211 2 1 3/8-27UNS-2A Ø13 8.8 Ø5 18.7 6.3 +0.4 31 -0.0 11.5 2 Circuit Breakers - 0.3 9 45 20 16 - 0.3 11.5 8 Thermal (T- and TA-Line) T13-211 https://www.schurter.com /PG17_20 14 Diagrams T13-... 1 2 Approval Rated current Rated Voltage AC Rated Voltage DC UL 1077 0.05...30 A 277 V 28 V CSA C22.2 No. 235 0.05...30 A 277 V 28 V EN 60934 0.05...30 A 240 V - GB 17701 0.05...30 A 240 V - Circuit Breakers 3 Ø 9.6 Thermal (T- and TA-Line) T13-211 https://www.schurter.com /PG17_20 Typical internal resistance Rated Current [A] Internal Resistance [Ω] 0.05 376.500 0.50 4.40 1.00 1.10 2.00 0.31 3.00 0.14 4.00 0.068 5.00 0.048 6.00 0.033 8.00 0.026 9.00 0.0125 10.00 0.0125 11.00 0.0085 12.00 0.0085 13.00 0.0085 14.00 0.007 15.00 0.007 16.00 0.007 17.00 0.0047 18.00 0.0047 19.00 0.0047 20.00 0.004 21.00 0.0035 22.00 0.003 23.00 0.003 24.00 0.003 25.00 0.003 26.00 0.0022 27.00 0.002 28.00 0.002 29.00 0.002 30.00 0.002 Effect of ambient temperature The units are calibrated for an ambient temperature of +23°C. To determine the rated cur- rent for a lower or higher ambient temperature, use a correction factor (typical value) from the table below: Ambient Temperature [°C] Correction factor -5 0.88 0 0.90 10 0.95 23 1.00 30 1.05 40 1.10 50 1.18 60 1.26 Example: Rated current = 5 A, Environmental temperature = 40 °C, --> Correction factor = 1.1, Resulting current = 5.5 A --> Fount to next higher rated current: 6 A 4 Circuit Breakers Thermal (T- and TA-Line) T13-211 https://www.schurter.com /PG17_20 Time-Current-Curves [ min ] [ sec ] 10'000 < 7,0 A > 7,0 A 60 2`000 30 20 1`000 10 500 5 200 100 1 50 20 10 5 2 1 0,5 0,3 0,2 0,1 1,05 1,32 2 3 4 5 8 10 Multiple of Rated Current In Reference Temperature +23° Config. Code T13|-|1|2|3|B|-|1.23| The characters are placeholders for the correspondingly keys of selections from the key tables. Rated current Configuration T13|-| 1 |2|3|B|-|1.23| = Mounting key Mounting Configuration 0.05 A 0.05 key 0.1 A 0.1 Threaded neck type with knurled nut 2 0.15 A 0.15 0.2 A 0.2 T13|-|1| 2 |3|B|-|1.23| = Actuation Type 0.3 A 0.3 0.4 A 0.4 Actuation Type Configuration 0.5 A 0.5 key 0.6 A 0.6 Reset type 1 0.7 A 0.7 0.8 A 0.8 T13|-|1|2| 3 |B|-|1.23| = Terminal 0.9 A 0.9 1.0 1 Terminal Configuration key 1.1 A 1.1 Quick connect terminal 6.3x0.8mm 1 1.2 A 1.2 1.3 A 1.3 1.4 A 1.4 T13|-|1|2|3| B |-|1.23| = Setting indication 1.5 A 1.5 Setting indication Configuration 1.6 A 1.6 key 1.7 A 1.7 Setting indication R 1.8 A 1.8 1.9 A 1.9 2.0 A 2 T13|-|1|2|3|B|-| 1.23 | = Rated current 2.1 A 2.1 2.3 A 2.3 Other rated currents on request Circuit Breakers 5 Time in Seconds Thermal (T- and TA-Line) T13-211 https://www.schurter.com /PG17_20 Rated current Configuration Rated current Configuration key key 2.5 A 2.5 9.5 A 9.5 2.8 A 2.8 10.0 A 10 3.0 A 3 11.0 A 11 3.3 A 3.3 12.0 A 12 3.5 A 3.5 13.0 A 13 4.0 A 4 14.0 A 14 4.5 A 4.5 15.0 A 15 5.0 A 5 16.0 A 16 5.5 A 5.5 17.0 A 17 6.0 6 18.0 A 18 6.5 A 6.5 19.0 A 19 7.0 A 7 20.0 A 20 7.5 A 7.5 22.0 A 22 8.0 A 8 25.0 A 25 8.5 A 8.5 28.0 A 28 9.0 A 9 30.0 A 30 Other rated currents on request Other rated currents on request Variants Rated current Setting indication Config. Code Order Number 15.0 A T13-211-15 4411.0007 20.0 A T13-211-20 4411.0010 █ 30.0 A T13-211-30 4411.0017 █ 18.0 A T13-211-18 4411.0019 25.0 A T13-211-25 4411.0073 30.0 A l T13-211R-30 4411.0221 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock- Check/Stock-Check-SCHURTER 20 Pcs Packaging Unit Accessories Description T-Line Accessories Accessories to T-Line The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 6 Circuit Breakers to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 11.04.2018