Power Entry Modules with Line Filter 5003 https://www.schurter.com /PG06 Appliance Inlet DC Filter, ECO Design, Front- or Rear Side Mounting Screw-on mounting, front or back side Screw-on mounting, front or back side Snap-in mounting PCB snap-in version Quick connect terminals 6.3 x 0.8 mm with wires (stranded) MOLEX HCS-125 connector AMP Universal MATE-N-LOK or MOLEX MLX AMP Universal MATE-N-LOK or MOLEX MLX See below: Approvals and Compliances Description Characteristics - Panel Mount : - Compact high-performance DC-filter Optimal shielding due to completely closed filter case, unpotted Screw-on version from front or rear side, snap-in version from front - Applications: side, PCB Version from rear side - Mission Critical Ethernet LAN Routers - 2 Functions : - High uptime Ethernet LAN Switches Appliance Inlet , DC line filter in standard version - Fiber Optic WAN Switches - Solder, quick connect or wires (stranded) - Fiber Optic WAN Multiplexer Other versions on request - Snap-in for panel thickness >2mm to 3mm - flexible wire with various lenghts - Quick connect terminals 4.8 x 0.8 mm - Capacity CY 5.5 nF - with long earth pin in connector References PCB Mounting Alternative: version 5120 for AC applications Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC 15 A / 125 VDC Line Filter DC Standard Version, UL 1283 Technical Details Ratings UL/CSA 3 - 15 A @ Ta 40 °C / 125 VDC MTBF > 3'900'000 h acc. to MIL-HB-217 F Dielectric Strength > 0.5 kVDC between (VAC 1 min., DIN EN 50155) > 1.1 kVDC between protective conduc- tor and live parts Test voltage (2 sec) Allowable Operation Tempe- -25 °C to 85 °C rature Climatic Category 25/085/21 acc. to IEC 60068-1 Protection Class Suitable for appliances with protection class I Terminal Quick connect terminals 6.3 x 0.8 mm Wire leads AWG 18 (10-15A AWG 16), 150 mm Panel Thickness S Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 0.8 mm to 2 mm (all steps with one variant) Material: Housing Themoplast / steel tin-plated, black / metallic, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals EMC Products 1 Power Entry Modules with Line Filter 5003 https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5003 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40020642 UL Approvals UL UL File Number: E72928 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Dimensions [mm] Front- or rear side mounting for screws with nuts or blind rivets, mating connector Molex HCS-125 2 max. 22.4 0.5 R 3 47 3.6 24.6 59 2 EMC Products max. 30 48.6 ±0.20 40 Power Entry Modules with Line Filter 5003 https://www.schurter.com /PG06 Rear side mounting with pre-formed, threaded holes for M3 screws, mating connector Molex HCS-125 2 max. 22.4 0.5 R 3 47 M3x0.5 24.6 59 Snap-in mounting from front side, mating connector Molex HCS-125 max. 22.4 min. 0.5 R 3 24.6 47 2 59 Front or rear side mounting for screws with nuts or blind rivets, mating connector AMP Universal MATE-N-LOK oder Molex MLX max. 22.4 0.5 10 R 3 40 3.6 24.6 52 EMC Products 3 max. 30 max. 30 max. 30 48.6 48.6 32.6 ±0.20 40 ±0.20 40 Power Entry Modules with Line Filter 5003 https://www.schurter.com /PG06 Rear side mounting with pre-formed, threaded holes for M3 screws, mating connector AMP Universal MATE-N-LOK or Molex MLX max. 22.4 0.5 10 R 3 40 M3x0.5 24.6 52 Snap-in mounting from front side, mating connector AMP Universal MATE-N-LOK or Molex MLX max. 22.4 min. 0.5 10 R 3 24.6 40 52 +0.20 ±0.1 29 30.3 0 max.R3 max.R3 ±0.15 ±0.15 40 40 Panel cutout for front side mounting Panel cutout for rear side mounting max.R 1.5 ±0.10 29.4 Panel cutout for snap-in mounting 4 EMC Products 3.5 max. 30 max. 30 ±0.10 21.5 ±0.1 21.5 48.6 32.6 3.5 ±0.20 40 +0.20 22.8 0 Power Entry Modules with Line Filter 5003 https://www.schurter.com /PG06 PCB snap-in rear-side mounting with pre-formed threaded holes for M3 screws, mating connector Molex HCS-125 2 max. 22.4 min. 0.5 R 3 47 M3x0.5 59 +0.20 22.8 0 ±0.10 27 ±0.10 ±0.05 ø6 12 max.R3 ø3.5 PCB rear-side mounting with pre-formed threaded holes for M3 screws, mating connector Molex HCS-125 2 max. 22.4 min. 0.5 R 3 47 M3x0.5 59 24.6 +0.20 22.8 0 ±0.10 12 max.R3 ø3.5 EMC Products 5 +0.10 ø1.6 0 +0.10 ø1.6 0 40 40 +0.20 +0.20 max. 30 max. 30 30.3 30.3 0 0 ±0.15 ±0.15 40 40 48.6 48.6 ±0.10 33.9 ±0.10 33.9 ±0.10 34 12 Power Entry Modules with Line Filter 5003 https://www.schurter.com /PG06 PCB snap-in rear-side mounting with pre-formed threaded holes for M3 screws, mating connector AMP Universal MATE-N-LOK or MOLEX MLX max. 22.4 min. 0.5 10 R 3 40 M3x0.5 42.5 24.6 52 +0.20 22.8 0 ±0.10 27 ±0.10 ±0.5 12 ø6 max.R3 ø3.5 PCB rear-side mounting with pre-formed threaded holes for M3 screws, mating connector AMP Universal MATE-N-LOK or Molex MLX max. 22.4 min. 0.5 10 R 3 40 M3x0.5 52 24.6 +0.20 22.8 0 ±0.10 12 max.R3 ø3.5 6 EMC Products +0.10 ø1.6 0 +0.10 ø1.6 0 40 40 +0.20 +0.20 max. 30 max. 30 30.3 30.3 0 0 ±0.15 ±0.15 40 40 48.6 48.6 ±0.10 26.9 ±0.10 26.9 ±0.10 27 27 12 12 Power Entry Modules with Line Filter 5003 https://www.schurter.com /PG06 Screw and snap-in mounting with flexible wire, mating connector Molex HCS-125 or AMP Universal MATE-N-LOK 2 max. 22.4 1.25 min. 0.5 R 3 150 6.6 47 M3x0.5 1) 59 24.6 +0.20 ±0.10 22.8 21.5 0 ±0.10 21.5 max.R3 max.R3 max.R1.5 M3 ø3.5 2) 3) 4) 1) Flexible wire, standard length 150 mm or special length on request 2) Panel cut-out screw-on version, front-side mounting 3) Panel cut-out, screw-on version, back-side mounting 4) Panel cut-out snap-in version, front-side mounting Mating Connector AMP Universal MATE-N-LOK Housing: AMP no. 1-480700-0 Molex HCS-125 Female terminal (3 needed per housing): AMP no. 926901-1 Housing: Molex no. 03-12-1036 Molex MLX Female terminal (3 needed per housing): Molex no. 18-12-1222 Housing: Molex no. 50-84-1030 Female terminal (3 needed per housing): Molex no. 02-08-1002 Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacitance R [MΩ] [A] L [mH] CX [nF] CY [nF] 3 DC Standard Version 2 x 4 100 4.7 1 6 DC Standard Version 2 x 0.8 100 4.7 1 10 DC Standard Version 2 x 0.4 100 4.7 1 15 DC Standard Version 2 x 0.1 100 4.7 1 EMC Products 7 ±0.20 40 ±0.1 29 max. 30 ±0.15 40 48.6 +0.20 30.3 0 ±0.15 40 ±0.10 29.4 Power Entry Modules with Line Filter 5003 https://www.schurter.com /PG06 Diagrams 3 L1 1) 2) Cy R 2 Cx L2 Cy 1 1) Line 2) Load - - - - 50Ω differential mode _____ 50Ω common mode Attenuation Loss Standard version 3 A 6 A 10 A 15A All Variants Rated Current Mounting Mounting side Terminal Mating Connector Order Number [A] 3 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0121.1 3 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.015B.1 3 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.016B.1 3 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0111.1 6 Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0231.1 6 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0221.1 6 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.025B.1 6 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.026B.1 6 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0211.1 6 Screw-on/Rivet Front-/Rear-Side Solder terminal Molex HCS-125 5003.0213.1 10 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0321.1 10 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.035B.1 10 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.036B.1 10 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0311.1 10 Screw-on/Rivet Front-/Rear-Side Flexible wire and Earth pin 6.3 x 0.8 Molex HCS-125 5003.0316.1 15 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0421.1 15 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.045B.1 15 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 Molex HCS-125 5003.046B.1 15 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm Molex HCS-125 5003.0411.1 3 Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1131.1 3 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1121.1 3 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.115B.1 3 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.116B.1 3 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1111.1 6 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1221.1 6 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.125B.1 6 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.126B.1 6 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1211.1 8 EMC Products Power Entry Modules with Line Filter 5003 https://www.schurter.com /PG06 Rated Current Mounting Mounting side Terminal Mating Connector Order Number [A] 10 Snap-in Front Side Flexible wire and Earth pin 6.3 x 0.8 AMP / Molex MLX 5003.1336.1 10 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1321.1 10 Screw Rear Side Solder terminal AMP / Molex MLX 5003.1323.1 10 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.135B.1 10 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.136B.1 10 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1311.1 15 Snap-in Front Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1431.1 15 Snap-in 2 - 3 mm Front Side Flexible wire and Earth solder terminal AMP / Molex MLX 5003.1448.1 15 Screw Rear Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1421.1 15 Screw/PCB Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.145B.1 15 Screw/PCB snap-in Rear Side PCB pin and earth pin 6.3 x 0.8 AMP / Molex MLX 5003.146B.1 15 Screw-on/Rivet Front-/Rear-Side Quick connect terminals 6.3 x 0.8 mm AMP / Molex MLX 5003.1411.1 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Type for screw on mounting from rear side has pre-threaded holes for M3 screws Packaging unit 10 Pcs Accessories Description Assorted Covers Rear Cover 0859.0048 Cord retaining kits Cord retaining strain relief Flat head, E 4700.0005 Flat head, G 4700.0007 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed EMC Products 9 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 08.03.2018