Power Entry Modules with Line Filter 5008 https://www.schurter.com /PG06 IEC Appliance Inlet C8 with Filter, Front Side Mounting Snap-in mounting from front side Screw-on mounting from front side C8 Approvals and Compliances 70° C Description Characteristics - Panel Mount : - Compact high performance filter Screw-on or snap-in mounting from front side - Suitable for use in equipment according to IEC/UL 60950 Suitable for use in medical equipment according to IEC/UL 60601-1 - 2 Functions : Appliance Inlet Protection class II , Line filter in standard and medical Other versions on request version - Standard version without X-capacitor - Solder terminals or quick connect terminals - Polarized C8 connector References Alternative: version without line filter 2576; 2578 Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product Technical Data Ratings IEC 0.5 - 2.5 A @ Ta 40 °C / 250 VAC; 50 Hz appliance inlet/-outlet C8 acc. to IEC 60320-1 UL 498, CSA C22.2 no. 42 (for cold Ratings UL/CSA 0.5 - 6 A @ Ta 40 °C / 250 VAC; 60 Hz conditions) pin-temperature 70 °C, Dielectric Strength > 1.7 kVDC between L-N 2.5 A, Protection Class II > 4 kVDC between L/N-PE Line Filter Standard and Medical Version, IEC Test voltage (2 sec) 60939, UL 1283, CSA C22.2 no. 8 Impulse Withstand Voltage > 2.5 kV between L-N Technical Details Allowable Operation Tempe- -25 °C to 85 °C MTBF > 6'700'000 h acc. to MIL-HB-217 F rature Climatic Category 25/085/21 acc. to IEC 60068-1 IP-Protection from front side IP 40 acc. to IEC 60529 Protection Class Suitable for appliances with protection class II acc. to IEC 61140 Terminal solder pin or quick connect terminals 6.3 x 0.8 or 4.8 x 0.8 mm Panel Thickness S Screw Mounting screw torque max 0.5 Nm Snap-in 1 mm to 3 mm Material: Housing Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5008 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40029278 UL Approvals UL UL File Number: E72928 EMC Products 1 Power Entry Modules with Line Filter 5008 https://www.schurter.com /PG06 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 EMC Products Power Entry Modules with Line Filter 5008 https://www.schurter.com /PG06 Dimension [mm] Screw-on mounting from front side 34.5 2.2 16 18 R 4 ø6.3 45.7 ø3.4 +0.20 16 0 max. R 0.5 ø3.5 Snap-in mounting from front side 16 34.5 2.2 18 R 3 45.7 +0.20 16 0 max. R 2 EMC Products 3 +0.20 37 27.2 ±0.15 24 28 0 +0.20 20.2 0 ±0.10 28 20 20 Power Entry Modules with Line Filter 5008 https://www.schurter.com /PG06 Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacitance R [MΩ] [A] L [mH] CX [nF] CY [nF] 1 Standard Version without Cx 2 x 8 - - - 0.5 Standard Version 2 x 18 100 - - 1 Standard Version 2 x 8 100 - - 2.5 Standard Version 2 x 1.2 100 - - 4 Standard Version 2 x 0.8 100 - - 6 Standard Version 2 x 0.3 100 - - 0.5 Medical Version (M5) 2 x 18 100 - 1 1 Medical Version (M5) 2 x 8 100 - 1 2.5 Medical Version (M5) 2 x 1.2 100 - 1 4 Medical Version (M5) 2 x 0.8 100 - 1 6 Medical Version (M5) 2 x 0.3 100 - 1 Diagrams Standard version Medical version M5 L L’ L L’ L1 L1 R 1) 2) 1) 2) Cx Cx L2 L2 N’ N’ N N 1) Line 1) Line 2) Load 2) Load Derating Curves 100 80 60 40 20 0 0 20 40 60 85 100 Ambient air temperature T °C a 4 EMC Products Admissible operating current in % of In Power Entry Modules with Line Filter 5008 https://www.schurter.com /PG06 - - - - 50Ω differential mode _____ 50Ω common mode Attenuation Loss Standard version 0.5 A 1 A 2.5 A 4 A 6 A Medical version (M5) 0.5 A 1 A 2.5 A 4 A 6 A All Variants Rated Cur- Filter-Type Mounting Terminal Order Number rent [A] 1 Standard Version without Cx Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2211 0.5 Standard Version Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1010 0.5 Standard Version Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2010 1 Standard Version Snap-in 1.5 Solder terminal 5008.2021 1 Standard Version Snap-in 1.5 Quick connect terminal 6.3 x 0.8 mm 5008.2001 1 Standard Version Snap-in 2.0 Quick connect terminal 4.8 x 0.8 mm 5008.3011 2.5 Standard Version Screw Solder terminal 5008.0022 2.5 Standard Version Screw Quick connect terminal 6.3 x 0.8 mm 5008.0002 2.5 Standard Version Screw Quick connect terminal 4.8 x 0.8 mm 5008.0012 2.5 Standard Version Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1012 2.5 Standard Version Snap-in 1.5 Solder terminal 5008.2022 2.5 Standard Version Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2012 2.5 Standard Version Snap-in 2.0 Solder terminal 5008.3022 2.5 Standard Version Snap-in 2.0 Quick connect terminal 6.3 x 0.8 mm 5008.3002 EMC Products 5 Power Entry Modules with Line Filter 5008 https://www.schurter.com /PG06 Rated Cur- Filter-Type Mounting Terminal Order Number rent [A] 4 Standard Version Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2014 6 Standard Version Screw Quick connect terminal 6.3 x 0.8 mm 5008.0006 6 Standard Version Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1016 6 Standard Version Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2016 0.5 Medical Version (M5) Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1110 1 Medical Version (M5) Screw Quick connect terminal 4.8 x 0.8 mm 5008.0111 1 Medical Version (M5) Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1111 1 Medical Version (M5) Snap-in 2.0 Quick connect terminal 4.8 x 0.8 mm 5008.3111 2.5 Medical Version (M5) Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1112 2.5 Medical Version (M5) Snap-in 2.0 Quick connect terminal 6.3 x 0.8 mm 5008.3102 4 Medical Version (M5) Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1114 4 Medical Version (M5) Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2114 6 Medical Version (M5) Snap-in 1.0 Quick connect terminal 4.8 x 0.8 mm 5008.1116 6 Medical Version (M5) Snap-in 1.5 Quick connect terminal 4.8 x 0.8 mm 5008.2116 Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 20 Pcs Packaging unit Mating Outlets/Connectors Category / Description Power Cord Overview complete Cord Sets 2.5 A, IEC Connector, Black, 2.0 m, H03VVH2-F 2x0,75mm2, Connector IEC C7, 001500 mm, H03VVH2- 6013.0474 F2G0.75, black Cord Sets 2.5 A, IEC Connector, Black, 4.0 m, H03VVH2-F 2x0,75mm2, Connector IEC C7, 001500 mm, H05VVH2- 6013.0478 F2G0.75, black Power Cord further types to 5008 Power Supply Cord Overview complete Cord Sets 2.5 A, North America, Black, 2.0 m, SVT 2x18AWG, Connector IEC C7, 002500 mm, NISPT-2, black 6010.5274 Cord Sets 2.5 A, North America, Black, 4.0 m, SVT 2x18AWG, Connector IEC C7, 002500 mm, NISPT-2, black 6010.5278 Power Supply Cord further types to 5008 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 6 EMC Products to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 02.12.2017