Power Entry Modules with Line Filter 5110 https://www.schurter.com /PG06 IEC Appliance Inlet C14 with Filter C14 See below: Approvals and Compliances 70° C Description Characteristics - Panel Mount : - All single elements are already wired Snap-in or screw-on mounting from front side - Suitable for use in equipment according to IEC/UL 60950 Suitable for use in medical equipment according to IEC/UL 60601-1 - 2 Functions : Appliance Inlet Protection class I , Line filter in standard and medical Other versions on request version - Capacity CX 100 nF - Quick connect terminals 6.3 x 0.8 mm - Medical version M80 Unique Selling Proposition References - Ultra-compact design Alternative: version without line filter 6100-3; 6100-4 - High quality filter case made of stainless steel Weblinks - Highly resistant since potted filter pdf datasheet, html-datasheet, General Product Information, Distributor- - Various filter variants Stock-Check, Accessories, Detailed request for product Caractéristiques techniques Ratings IEC 1 - 10 A @ Ta 40 °C / 250 VAC; 50 Hz appliance inlet/-outlet C14 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold Valeurs nominales UL/CSA 1 - 15 A @ Ta 40 °C / 125 VAC; 60 Hz conditions) pin-temperature 70 °C, 10 A, Leakage Current standard < 0.5 mA (250 V / 60 Hz) Protection Class I medical < 5 µA (250 V / 60 Hz) Line Filter Standard and Medical Version, IEC Résistance diélectrique > 1.7 kVDC between L-N 60939, UL 1283, CSA C22.2 no. 8 > 2.7 kVDC between L/N-PE Technical Details Test voltage (2 sec) MTBF > 3'100'000 h acc. to MIL-HB-217 F Température de fonctionne- -25 °C to 85 °C ment admissible Climatic Category 25/085/21 acc. to IEC 60068-1 Fuseholders acc. to, IEC 60068-1 CBE acc. to, IEC 60068-1 VDR acc. to, IEC 60068-1 IP-Protection from front side IP 40 acc. to IEC 60529 Protection Class Suitable for appliances with protection class I acc. to IEC 61140 Borne Quick connect terminals 6.3 x 0.8 mm Epaisseur du panneau S Screw: max 5 mm Mounting screw torque max 0.5 Nm Snap-in: 0.8 mm to 3 mm Matériau: Boîtier Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals EMC Products 1 Power Entry Modules with Line Filter 5110 https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5110 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40035745 UL Approvals UL UL File Number: E72928 CQC Approvals CQC CCC Certificate Number: CQC17001169377 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 EMC Products Power Entry Modules with Line Filter 5110 https://www.schurter.com /PG06 Dimensions [mm] Screw-on mounting 48.4 +0.2 40 9.5 40.9 5.2 21 29 0 max.R3 ±0.10 3.2 2.7 40 6.3x90˚ 3.6 Snap-in mounting +0.2 36 9.5 41.2 52129 0 max.R3 3.5 Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacitance R [MΩ] [A] L [mH] CX [nF] CY [nF] 1 Standard Version 2 x 11 47 2.2 - 2 Standard Version 2 x 4 47 2.2 - 3 Standard Version 2 x 2.5 47 2.2 - 4 Standard Version 2 x 1.6 47 2.2 - 6 Standard Version 2 x 0.7 47 2.2 - 8 Standard Version 2 x 0.6 47 2.2 - 10 Standard Version 2 x 0.4 47 2.2 - 15 Standard Version 2 x 0.1 47 2.2 - 1 Medical Version (M5) 2 x 11 47 - 1 2 Medical Version (M5) 2 x 4 47 - 1 3 Medical Version (M5) 2 x 2.5 47 - 1 4 Medical Version (M5) 2 x 1.6 47 - 1 6 Medical Version (M5) 2 x 0.7 47 - 1 8 Medical Version (M5) 2 x 0.6 47 - 1 10 Medical Version (M5) 2 x 0.4 47 - 1 15 Medical Version (M5) 2 x 0.1 47 - 1 10 Standard and Medical Version 2 x 0.4 47 2.2 1 EMC Products 3 23 23 7.9 7.9 4.1 4.1 +0.2 21 0 +0.2 21 0 Power Entry Modules with Line Filter 5110 https://www.schurter.com /PG06 Diagrams Standard version Medical version (M5) L L’ L L’ L1 L1 Cy 1) 2) 1) 2) PE R PE’ PE R PE’ Cx Cx L2 L2 Cy N N’ N N’ 1) Line 1) Line 2) Load 2) Load - - - - 50Ω differential mode _____ 50Ω common mode Attenuation Loss Standard version 1 A 2 A 3 A 4 A 6 A 8 A 10 A 15A Medical version (M5) 1 A 2 A 3 A 4 A 6 A 8 A 10 A 15A 4 EMC Products Power Entry Modules with Line Filter 5110 https://www.schurter.com /PG06 All Variants Rated Current Filter-Type Panel mounting Order Number [A] █ 1 Standard Version Snap-in 5110.0143.1 2 Standard Version Snap-in 5110.0243.1 █ 3 Standard Version Snap-in 5110.0343.1 █ 4 Standard Version Snap-in 5110.0443.1 █ 6 Standard Version Snap-in 5110.0643.1 8 Standard Version Snap-in 5110.0843.1 10 Standard Version Snap-in 5110.1043.1 █ █ 15 Standard Version Snap-in 5110.1543.1 █ 1 Standard Version Screw 5110.0133.1 2 Standard Version Screw 5110.0233.1 3 Standard Version Screw 5110.0333.1 █ 4 Standard Version Screw 5110.0433.1 █ 6 Standard Version Screw 5110.0633.1 8 Standard Version Screw 5110.0833.1 10 Standard Version Screw 5110.1033.1 █ 15 Standard Version Screw 5110.1533.1 █ 1 Medical Version (M5) Snap-in 5110.0143.3 2 Medical Version (M5) Snap-in 5110.0243.3 3 Medical Version (M5) Snap-in 5110.0343.3 4 Medical Version (M5) Snap-in 5110.0443.3 6 Medical Version (M5) Snap-in 5110.0643.3 8 Medical Version (M5) Snap-in 5110.0843.3 10 Medical Version (M5) Snap-in 5110.1043.3 15 Medical Version (M5) Snap-in 5110.1543.3 █ 1 Medical Version (M5) Screw 5110.0133.3 2 Medical Version (M5) Screw 5110.0233.3 3 Medical Version (M5) Screw 5110.0333.3 █ 4 Medical Version (M5) Screw 5110.0433.3 █ 6 Medical Version (M5) Screw 5110.0633.3 8 Medical Version (M5) Screw 5110.0833.3 10 Medical Version (M5) Screw 5110.1033.3 █ 15 Medical Version (M5) Screw 5110.1533.3 █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock- Check/Stock-Check-SCHURTER 10 Pcs Packaging unit EMC Products 5 Power Entry Modules with Line Filter 5110 https://www.schurter.com /PG06 Accessories Description Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0048 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Countersunk, C 4700.0003 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to 5110 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to 5110 ... The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 6 EMC Products to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 13.03.2018