Power Entry Modules with Line Filter 5130 https://www.schurter.com /PG06 IEC Appliance Inlet C20 with Filter, ECO design, front or rear side Mounting Screw-on or rivet mounting from front or rear side Screw-on mounting from rear side, integrated Snap-in mounting from front side Screw-on Version thread Snap-in version Screw-on Version C20 Approvals and Compliances 70° C Description Characteristics - Panel Mount : - Optimal shielding due to completely closed filter case, unpotted Screw-on version from front or rear side, snap-in version from front Suitable for assembly in metal plated plastic housings - Version with class X1 and X2 (standard version) capacitors side - Universal line filter for standard applications - 2 Functions : - Suitable for use in equipment according to IEC/UL 60950 Appliance Inlet Protection class I , Line filter in standard and medical Suitable for use in medical equipment according to IEC/UL 60601-1 version - Quick connect terminals Other versions on request - Solder terminals Unique Selling Proposition - Medical version M80 - ECO design - Capacity CX 330 nF - Metal flange for optimal shielding - Compact design References - V-Lock cord retaining Fits to type: 4790; 4795 0104; 0104U; 1651; 1652; 1654; 4790; 4 795; VAC19KS Alternative: version without line filter 4793; 4798 Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 16 A @ Ta 40 °C / 250 VAC; 50 Hz appliance inlet/-outlet C20 acc. to IEC 60320-1, Ratings UL/CSA 20 A @ Ta 40 °C / 250 VAC; 60 Hz UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 16 A, Leakage Current standard < 0.5 mA (250 V / 60 Hz) Protection Class I medical < 5 µA (250 V / 60 Hz) Line Filter Standard and Medical Version, IEC Dielectric Strength > 1.7 kVDC between L-N 60939, UL 1283, CSA C22.2 no. 8 > 2.7 kVDC between L/N-PE Technical Details Test voltage (2 sec) MTBF > 3'000'000 h acc. to MIL-HB-217 F Impulse Withstand Voltage > 2.5 kV between L-N (CX2) > 4 kV between L-N (CX1) > 5 kV between L/N-PE (Cy2) voltage (1.2/50 μs) Allowable Operation Tempe- -25 °C to 85 °C rature Climatic Category 25/085/21 acc. to IEC 60068-1 IP-Protection from front side IP 40 acc. to IEC 60529 Protection Class Suitable for appliances with protection class I acc. to IEC 61140 Terminal Quick connect terminal 6.3 x 0.8 mm Panel Thickness S Screw: max 8 mm Mounting screw torque max 0.5 Nm Snap-in: 0.8 mm to 3 mm (all steps with one variant) Material: Housing Themoplast / steel tin-plated, black / metallic, UL 94V-0 Approvals and Compliances EMC Products 1 Power Entry Modules with Line Filter 5130 https://www.schurter.com /PG06 Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5130 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 104884 UL Approvals UL UL File Number: E72928 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 EMC Products Power Entry Modules with Line Filter 5130 https://www.schurter.com /PG06 Dimension [mm] Front or rear side mounting for screws with nuts or blind rivets 50.6 79.5 ±0.10 35 36 12 64 3.5 12 max.R3 3.6 33.9 M3 ±0.15 42 42 Rear side mounting with pre-formed, threaded holes for M3 screws 50.6 79.5 ±0.1 36.5 36 12 64 3.5 12 max.R3 M 3 33.9 3.6 ±0.15 42 42 Snap-in mounting from front side 39 79.5 ±0.10 35 36 12 64 3.5 12 max.R3 33.9 EMC Products 3 28 28 28 30.6 30.6 30.6 10.5 4.4 10.5 4.4 10.5 4.4 25.9 25.9 25.9 ±0.10 27 ±0.1 ±0.10 28.5 27 Power Entry Modules with Line Filter 5130 https://www.schurter.com /PG06 Technical Data of Filter-Components Rated Current Filter-Type Inductances L [mH] Capacitance Capacitance R [MΩ] [A] CX [nF] CY [nF] 16 Standard Version 2 x 0.6 100 2.2 1 20 Standard Version 2 x 0.3 100 2.2 1 16 Medical Version (M5) 2 x 0.6 100 - 1 20 Medical Version (M5) 2 x 0.3 100 - 1 Diagrams Standard or medical version (M80) Medical version (M5) L L’ L L’ L1 L1 Cy 1) R 2) 1) R 2) PE PE’ PE PE’ Cx Cx L2 L2 Cy N N’ N N’ 1) Line 1) Line 2) Load 2) Load - - - - 50Ω differential mode _____ 50Ω common mode Attenuation Loss Standard version 16 A 20 A Medical version (M5) 16 A 20 A All Variants Rated Current Rated Current Filter-Type Panel mounting Mounting side Terminal Capacitor V-Lock Order Number IEC [A] UL [A] 16 16 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 X2 100nF 5130.2000 █ mm 16 20 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 X2 100nF 5130.2001 mm 16 16 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 X1 100nF 5130.2100 mm 16 20 Standard Version Snap-in Front Side Quick connect terminals 6.3 x 0.8 X1 100nF 5130.2101 mm 16 16 Standard Version Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 X2 100nF 5130.0000 █ mm 16 16 Standard Version Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 X2 100nF l 5130.0000.21 mm 4 EMC Products Power Entry Modules with Line Filter 5130 https://www.schurter.com /PG06 Technical Data of Filter-Components Rated Current Rated Current Filter-Type Panel mounting Mounting side Terminal Capacitor V-Lock Order Number Rated Current Filter-Type Inductances L [mH] Capacitance Capacitance R [MΩ] IEC [A] UL [A] [A] CX [nF] CY [nF] 16 20 Standard Version Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 X2 100nF 5130.0001 16 Standard Version 2 x 0.6 100 2.2 1 mm 20 Standard Version 2 x 0.3 100 2.2 1 16 16 Standard Version Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 X1 100nF 5130.0100 16 Medical Version (M5) 2 x 0.6 100 - 1 mm 20 Medical Version (M5) 2 x 0.3 100 - 1 16 20 Standard Version Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 X1 100nF 5130.0101 mm 16 16 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 X2 100nF 5130.1000 mm 16 20 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 X2 100nF 5130.1001 mm 16 16 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 X1 100nF 5130.1100 █ mm 16 20 Standard Version Screw Rear Side Quick connect terminals 6.3 x 0.8 X1 100nF 5130.1101 mm 16 20 Medical Version (M5) Snap-in Front Side Quick connect terminals X1 100nF 5130.2301 16 16 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 X2 100nF 5130.2200 mm 16 20 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 X2 100nF 5130.2201 █ mm 16 16 Medical Version (M5) Snap-in Front Side Quick connect terminals 6.3 x 0.8 X1 100nF 5130.2300 mm 16 16 Medical Version (M5) Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 X2 100nF 5130.0200 mm 16 20 Medical Version (M5) Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 X2 100nF 5130.0201 mm 16 16 Medical Version (M5) Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 X1 100nF 5130.0300 mm 16 16 Medical Version (M5) Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 X1 100nF l 5130.0300.21 mm 16 20 Medical Version (M5) Screw-on/Rivet Front Side Quick connect terminals 6.3 x 0.8 X1 100nF 5130.0301 mm 16 16 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 X2 100nF 5130.1200 mm 16 20 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 X2 100nF 5130.1201 mm 16 16 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 X1 100nF 5130.1300 mm 16 20 Medical Version (M5) Screw Rear Side Quick connect terminals 6.3 x 0.8 X1 100nF 5130.1301 mm █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Type for screw on mounting from rear side has pre-threaded holes for M3 screws 20 Pcs Packaging unit EMC Products 5 Power Entry Modules with Line Filter 5130 https://www.schurter.com /PG06 Accessories Description Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0047 Cord retaining kits Cord retaining strain relief Flat head, L 4700.0011 Mating Inlets/Plugs Category / Description Connector Overview complete IEC Connector C19, Rewireable, Straight 4795 IEC Connector C19, Rewireable, Angled 4790 Connector further types to 5130 Mating Outlets/Connectors Connector Overview complete IEC Connector C19, Rewireable, Straight 4795 IEC Connector C19, Rewireable, Angled 4790 IEC Connector C19, Rewireable, Straight 0104U Connector further types to 5130 6 EMC Products Power Entry Modules with Line Filter 5130 https://www.schurter.com /PG06 Mating Outlets/Connectors shuttered Power Cord Overview complete Overview Power Cord with IEC Appliance Connector C19, V-Lock, straight VAC19KS Power Cord further types to 5130 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed EMC Products 7 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 02.12.2017