Power Entry Modules with Line Filter 5707 https://www.schurter.com /PG06 IEC Appliance Inlet C14 or C18 with Filter, Protection Degree IP65 into the Appliance, Fuseholder 1- or 2-pole, Front or Rear Mounting 5707.xxxx.xx2 Mounting from front side 5707.xxxx.xxx.22 with IP 54 V-Lock cord con- 5707 with IP 54 Inlet Gasket nection C14 C18 Approvals and Compliances 70° C 70° C Description Characteristics - Panel Mount : - Extreme robust design Screw-on version from front or rear side , Screws with sealing are in- - All single elements are already wired - Screw type fuse carrier, slotted cluded - With EMC-shield - 4 Functions : - Especially for applications in rough environments (see technical data) Appliance Inlet protection class I or II , Line filter in standard and medi- - Suitable for use in equipment according to IEC/UL 60950 cal version , Fuseholder for fuse-links 5 x 20 mm , IP 65 protection into Suitable for use in medical equipment according to IEC/UL 60601-1 the appliance - For front side mounting versions a sealing kit IP 54 for the power sup- Other versions on request ply connection is available as an accessory: 4700.0021 - With solder terminals - Option suffix ".22" offers IP 54 for the power input in combination with - Class X1- and Y1-capacitors for enhanced withstand voltage V-Lock cordsets - Medical version M80 - Additional factory-mounted sealing (IP54) of power input - Quick connect terminals 6.3 x 0.8 mm - Version with current rating 3 A Unique Selling Proposition Weblinks - Sealed power entry module pdf datasheet, html-datasheet, General Product Information, Distributor- - Strong in Design and Safety Stock-Check, Accessories, Detailed request for product, Microsite - IP 65 protection to the appliance - IP 54 protection to the cord connection Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 1 - 8 A @ Ta 40 °C / 250 VAC; 50 Hz appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1 Ratings UL/CSA 1 - 8 A @ Ta 40 °C / 125 VAC; 60 Hz UL 498, CSA C22.2 no. 42 (for cold conditions) pin-temperature 70 °C, 8 A, Leakage Current standard < 0.5 mA (250 V / 60 Hz) Protection Class I or II medical < 5 µA (250 V / 60 Hz) Fuseholder 1 or 2 pole, Shocksafe category PC2 Dielectric Strength > 1.7 kVDC between L-N acc. to IEC 60127-6, > 2.7 kVDC between L/N-PE for fuse-links 5 x 20 mm Test voltage (2 sec) Rated Power Acceptance @ 5 x 20: 1.6 W 1-pole/ 1,2 W 2-pole per Allowable Operation Tempe- -25 °C to 85 °C Ta 23 °C pole rature Power Acceptance @ Ta > Admissible power acceptance at higher Climatic Category 25/085/21 acc. to IEC 60068-1 23°C ambient temperature see derating cur- IP-Protection from front side IP 65 acc. to IEC 60529 ves from rear-side IP 65 acc. to IEC 60529 Line Filter Standard and Medical Version, IEC Protection Class Suitable for appliances with protection 60939, UL 1283, CSA C22.2 no. 8 class I or II acc. to IEC 61140 Technical Details Terminal Quick connect terminals 6.3 x 0.8 mm MTBF > 2'800'000 h acc. to MIL-HB-217 F Panel Thickness S Screw, max 3 mm Mounting screw torque max 0.8 Nm 2 screws M3 with sealing are provided Material: Housing black / white / metallic, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals EMC Products 1 Power Entry Modules with Line Filter 5707 https://www.schurter.com /PG06 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5707 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40016382 UL Approvals UL UL File Number: E72928 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60939 Passive filters for suppressing electromagnetic interference Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to UL 1283 Electromagnetic interference filters Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Designed according to CSA C22.2 no. 8 Electromagnetic interference (EMI) filters Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Medical Equipment SCHURTER AG Suitable for use in medical equipment according to IEC/UL 60601-1 2 EMC Products R1.5 R1.5 R4.5 R4.5 Power Entry Modules with Line Filter 5707 https://www.schurter.com /PG06 Dimension [mm] Mounting from front side 59.6 ±0.20 36 ±0.15 3.5 36 ø 3.4 +0.20 29.2 0 ±0.20 12 43.6 0.5 29 30 51 Mounting from rear side 59.6 ±0.20 36 ±0.15 3.5 36 ø 3.4 +0.20 30.5 0 ±0.20 12 43.6 0.5 29 30 51 Assembly Instructions Mounting sealing kit IP 54 for the power supply (only for frontside moun- Mating cordsets to sealing kit ting) Part no Country plug Cable length Cross section Color 6000.0214 open end 2.0 m 3x1 mm2 black 2) 6003.0215 EURO plug 2.5 m 3x1 mm2 black 6004.0215 EURO plug 2.5 m 3x1 mm2 black 6007.0212 EURO plug 1.0 m 3x1 mm2 black 6) 6007.0214 IEC plug 2.0 m 3x1 mm2 black 4) 6004.0114 EURO plug 2.0 m 3x0.75 mm2 black 3) 6026.0215 Italy 2.5 m 3x1 mm2 black 6009.1315 North America 2.5 m 3x18 AWG black 7) 5) 6047.6414 Japan 2.0 m 3x0.75 mm2 black 6009.1214 North America 2.0 m 3x18 AWG black 6011.0215 Switzerland 2.5 m 3x1 mm2 black 1) 6044.0215 United Kingdom 2.5 m 3x1 mm2 black 1) Power entry module with factory-mounted inlet gasket 2) Chassis 3) Pillar 4) Gasket ring 5) Crinkle washer 6) Nut 7) Retaining clip EMC Products 3 R3.2 R1 R2.5 R3.2 R1.5 42 42 33 33 3x0.5 ø 3.2 32 32 +0.20 +0.20 0 0 33.5 32.2 Power Entry Modules with Line Filter 5707 https://www.schurter.com /PG06 Mounting standard version A BC 3/4 3 1 4 1 2 2 2 1 A) front view B) detail front mounting type C) detail rear mounting type 1) sealing of flange 2) sealing of fuseholder 3) sealing of screw hole (front mounting type: sealing ring on screw head) 4) sealing of screw hole (rear mounting type: sealing on screw thread) Important: - use supplied fuse caps (2) and mounting screws (3/4) - optimal sealing requires even and solid panel opening - recommended tightening torque for mounting screws (2/3/4): 0.5-0.8 Nm - IP65 protection between the inlet and connector pins, but no IP rating between the connector pins and the plug of the power cord! Technical Data of Filter-Components Rated Current Filter-Type Inductances Capacitance Capacitance R [MΩ] [A] L [mH] CX [nF] CY [nF] 1 Standard Version 2 x 12 100 2.2 1 2 Standard Version 2 x 5.2 100 2.2 1 4 Standard Version 2 x 2 100 2.2 1 6 Standard Version 2 x 0.8 100 2.2 1 8 Standard Version 2 x 0.4 100 2.2 1 1 Medical Version (M5) 2 x 12 100 - 1 2 Medical Version (M5) 2 x 5.2 100 - 1 4 Medical Version (M5) 2 x 2 100 - 1 6 Medical Version (M5) 2 x 0.8 100 - 1 8 Medical Version (M5) 2 x 0.4 100 - 1 2 Medical Version (M80) 2 x 5.2 100 0.47 1 Diagrams Standard version Medical version M5 L L' L L' F1 F1 L1 L1 Cy R R 1) 1) PE PE' 2) PE PE' 2) Cx Cx F2 L2 F2 L2 Cy N' N N N' 1) Line 1) Line 2) Load 2) Load 4 EMC Products Power Entry Modules with Line Filter 5707 https://www.schurter.com /PG06 Derating Curves 1-pole 2-pole 1.6 1.2 1.4 1.0 1.2 0.8 I = 1.0 I I = 1.0 In n 1.0 I = 0.7 I I = 0.7 I n n 0.8 0.6 I = << In I = << In 0.6 0.4 0.4 0.2 0.2 0.0 0.0 020406080 100 020406080 100 Ambient air temperature T °C Ambient Air Temperature T °C a a Attenuation Loss - - - - 50Ω differential mode _____ 50Ω common mode Standard version 1 A 2 A 4 A 6 A 8 A Medical version (M5) 1 A 2 A 4 A 6 A 8 A All Variants Rated Cur- Filter-Type Mounting side Cord retai- Protection Class Power Cord Fuseholder Color V-Lock Order Number rent [A] ning kits IP-protection 1 Standard Version Front Side - I - 1-pole black 5707.0101.112 1 Standard Version Rear Side - I - 1-pole black 5707.0101.113 2 Standard Version Front Side - I - 1-pole black 5707.0201.112 EMC Products 5 Admissible power acceptance in Watt Admissible power acceptance in Watt Power Entry Modules with Line Filter 5707 https://www.schurter.com /PG06 Rated Cur- Filter-Type Mounting side Cord retai- Protection Class Power Cord Fuseholder Color V-Lock Order Number rent [A] ning kits IP-protection 2 Standard Version Rear Side - I - 1-pole black 5707.0201.113 4 Standard Version Front Side - I - 1-pole black 5707.0401.112 4 Standard Version Rear Side - I - 1-pole black 5707.0401.113 6 Standard Version Front Side - I - 1-pole black 5707.0601.112 6 Standard Version Rear Side - I - 1-pole black 5707.0601.113 8 Standard Version Front Side - I - 1-pole black 5707.0801.112 black 8 Standard Version Rear Side - I - 1-pole 5707.0801.113 1 Standard Version Front Side - I - 2-pole black 5707.0101.312 1 Standard Version Rear Side - I - 2-pole black 5707.0101.313 █ 2 Standard Version Front Side - I - 2-pole black 5707.0201.312 2 Standard Version Rear Side - I - 2-pole black 5707.0201.313 █ 4 Standard Version Front Side - I - 2-pole black 5707.0401.312 4 Standard Version Rear Side - I - 2-pole black 5707.0401.313 █ 4 Standard Version Rear Side - I IP 54 2-pole black l 5707.0401.313.22 6 Standard Version Front Side - I - 2-pole black 5707.0601.312 6 Standard Version Rear Side - I - 2-pole black 5707.0601.313 8 Standard Version Front Side - I - 2-pole black 5707.0801.312 █ 8 Standard Version Front Side - I IP 54 2-pole black 5707.0801.312.01 8 Standard Version Rear Side - I - 2-pole black 5707.0801.313 8 Standard Version Rear Side - I - 2-pole black l 5707.0801.313.21 1 Medical Version (M5) Front Side - I - 2-pole black 5707.0103.312 1 Medical Version (M5) Rear Side - I - 2-pole black 5707.0103.313 1 Medical Version (M5) Rear Side - I - 2-pole black l 5707.0103.313.21 black 2 Medical Version (M5) Front Side - I - 2-pole 5707.0203.312 2 Medical Version (M5) Rear Side - I - 2-pole black 5707.0203.313 2 Medical Version (M5) Rear Side - I - 2-pole black l 5707.0203.313.21 4 Medical Version (M5) Rear Side - I IP 54 2-pole black l 3-100-897 4 Medical Version (M5) Front Side - I - 2-pole black 5707.0403.312 █ 4 Medical Version (M5) Rear Side - I - 2-pole black 5707.0403.313 4 Medical Version (M5) Rear Side - I - 2-pole black l 5707.0403.313.21 6 Medical Version (M5) Front Side - I - 2-pole black 5707.0603.312 6 Medical Version (M5) Rear Side - I - 2-pole black 5707.0603.313 6 Medical Version (M5) Rear Side - I - 2-pole black l 5707.0603.313.21 6 Medical Version (M5) Front Side - I - 2-pole white 5707.0613.312 6 Medical Version (M5) Front Side - I - 2-pole white l 5707.0613.312.21 6 Medical Version (M5) Rear Side - I - 2-pole white 5707.0613.313 6 Medical Version (M5) Rear Side - I - 2-pole white l 5707.0613.313.21 8 Medical Version (M5) Front Side - I - 2-pole black 5707.0803.312 8 Medical Version (M5) Front Side - I IP 54 2-pole black l 5707.0803.312.22 8 Medical Version (M5) Rear Side - I - 2-pole black 5707.0803.313 8 Medical Version (M5) Rear Side - I - 2-pole black l 5707.0803.313.21 black 1 Medical Version (M5) Front Side - II - 2-pole 5707.0103.412 1 Medical Version (M5) Rear Side - II - 2-pole black 5707.0103.413 2 Medical Version (M5) Front Side - II - 2-pole black 5707.0203.412 2 Medical Version (M5) Rear Side - II - 2-pole black 5707.0203.413 4 Medical Version (M5) Front Side - II - 2-pole black 5707.0403.412 4 Medical Version (M5) Rear Side - II - 2-pole black 5707.0403.413 6 EMC Products Power Entry Modules with Line Filter 5707 https://www.schurter.com /PG06 Rated Cur- Filter-Type Mounting side Cord retai- Protection Class Power Cord Fuseholder Color V-Lock Order Number rent [A] ning kits IP-protection 6 Medical Version (M5) Front Side - II - 2-pole black 5707.0603.412 6 Medical Version (M5) Rear Side - II - 2-pole black 5707.0603.413 8 Medical Version (M5) Front Side - II - 2-pole black 5707.0803.412 8 Medical Version (M5) Rear Side - II - 2-pole black 5707.0803.413 2 Medical Version (M80) Front Side - I IP 54 2-pole black 5707.0205.312.01 █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 10 Pcs Packaging unit Accessories Description Wire Harness Wire harness for SCHURTER products Assorted Covers Rear Cover 0859.0047 Mating Outlets/Connectors Category / Description Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to 5707 ... Interconnection Cord Overview complete Cord Sets 10 A, Interconnection, 2.0 m, IEC H05VV-F3G1.0, black 6007.0204 Cord Sets 10 A, Interconnection, 1.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0212 Cord Sets 10 A, Interconnection, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6007.0214 Interconnection Cord further types to 5707 EMC Products 7 Power Entry Modules with Line Filter 5707 https://www.schurter.com /PG06 Category / Description Power Supply Cord Overview complete Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6004.0215 Cord Sets 10 A, Europlug, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6003.0215 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0224 Cord Sets 10 A, uninsulated wires, 2.0 m, Connector IEC C13, H05VV-F3G1.0, black 6000.0214 Cord Sets 10 A, United Kingdom, 2.5 m, Connector IEC C13, H05VV-F3G1.0, black 6044.0215 Power Supply Cord further types to 5707 ... Power Supply or Interconnection Cord Overview complete Cord Sets 10 A, United Kingdom, 2.0 m, Connector IEC H05VV-F3G1.0, black 6044.0204 Power Supply or Interconnection Cord further types to 5707 Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power cord with IEC connector C17, V-Lock, straight VAC17KS Power Cord further types to 5707 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 8 EMC Products to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 02.12.2017