Power entry modules without line filter 6135 https://www.schurter.com /PG05 IEC Appliance Inlet C14 with Circuit Breaker TA35 2-pole C14 See below: Approvals and Compliances 70° C Description Characteristics - Panel Mount : - Unwired Snap-in version from front side - Switch non-illuminated or illuminated - Suitable for use in equipment according to IEC/UL 60950 - 2 Functions : Appliance Inlet , Protection class I , Circuit breaker type TA35 , 2-pole Other versions on request - Quick connect terminal 6.3 x 0.8 mm - Pre-wired version - Quick connect terminals 4.8 x 0.8 mm - Protection class II, 70°C References Alternative: version for 16 A (20 A) 6136 Substitute for type 7764 Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C14 acc. to IEC 60320-1 UL 60320-1, CSA C22.2 no. 60320-1 Ratings UL/CSA 15 A / 250 VAC; 60 Hz (for cold conditions) pin-temperature 70 Dielectric Strength > 2.5 kVAC between L-N °C, 10 A, Protection Class I > 3 kVAC between L/N-PE Circuit Breakers Acc. IEC/EN 60934, UL 1077, CSA (1 min/50 Hz) 22.2 no. 235 Allowable Operation Tempe- -25 °C to 60 °C 2-pole rocker switch, illuminated or non- rature illuminated. IP-Protection from front side IP 40 acc. to IEC 60529 Conditional short circuit Inc: Insulation cover Suitable for appliances with protection 2000 A class I acc. to IEC 61140 Terminal Quick connect terminals 6.3 x 0.8 mm Panel Thickness S Snap-in1.5/2/2.5 mm Material: Housing Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Connectors 1 Power entry modules without line filter 6135 https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6135 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40023066 UL Approvals UL UL File Number: E96454 CQC Approvals CQC CCC Certificate Number: 2015180204000152 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Dimensions [mm] +0.20 27.4 0 30 10.6 31.8 3.2 6 max. R 0.2 ± 0.05 S R 3 28.4 2 Connectors 65.3 58.8 x 27.2 +0.20 59 0 Power entry modules without line filter 6135 https://www.schurter.com /PG05 Diagrams L' P1 L 1) 2) PE PE' N N' P2 1) Line 2) Load Connectors 3 TA35 Power entry modules without line filter 6135 https://www.schurter.com /PG05 4 Connectors Power entry modules without line filter 6135 https://www.schurter.com /PG05 Connectors 5 Power entry modules without line filter 6135 https://www.schurter.com /PG05 Packaging unit 40 Pcs Accessories Description Assorted Covers Rear Cover 0859.0074 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 Appliance Outlet further types to 6135 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to 6135 ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power Cord further types to 6135 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 6 Connectors to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 03.05.2018