Power entry modules without line filter 6145 https://www.schurter.com /PG05 IEC Appliance Inlet C14 with Circuit Breaker TA45 C14 See below: Approvals and Compliances 70° C Description Characteristics - Panel Mount : - All single elements are already wired Screw-on mounting from front side - Unwired versions available on request - Circuit Breaker non-illuminated or illuminated - 2 Functions : - Suitable for use in equipment according to IEC/UL 60950 Appliance Inlet Protection class I , circuit breaker type TA45 2-pole - Quick connect terminals 6.3 x 0.8 mm References Alternative: version with line filter 5145 We recommend for new applications DF11 Weblinks pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C14 acc. to IEC 60320-1, UL 60320-1, CSA C22.2 no. 60320-1 Ratings UL/CSA 15 A / 250 VAC; 60 Hz (for cold conditions) pin-temperature 70 Dielectric Strength > 1.5 kVAC between L/N-PE °C, 10 A, Protection Class I (1 min/50 Hz) Circuit Breakers Acc. IEC/EN 60934, UL 1077, CSA Allowable Operation Tempe- -10 °C to 55 °C 22.2 no. 235 rature 2-pole rocker switch, illuminated or non- IP-Protection from front side IP 40 acc. to IEC 60529 illuminated. Optional with undervoltage- Insulation cover Suitable for appliances with protection or remote trip release class I acc. to IEC 61140 Short circuit capacity Icn: Terminal Quick connect terminals 6.3 x 0.8 mm at In < 3A/240VAC : 10 x In Panel Thickness S Screw: max 6 mm at In ≥ 3A/240VAC : 300A Mounting screw torque max 0.5 Nm Material: Housing Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6145 Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 40040061 UL Approvals UL UL File Number: E96454 Connectors 1 Power entry modules without line filter 6145 https://www.schurter.com /PG05 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Dimensions [mm] Detail A 2 0 29 -0.2 36 43.1 1 A 6.3x0.8mm 0 R3 -0.5 6.3x0.8mm 24.2 M3 / ø 3.6 67.5 13.9 * --- Version TA45 with undervoltage release 2 Connectors 91.5 80 ø 3.3 ø 6.1 +0.10 72 0 ±0.1 80 Power entry modules without line filter 6145 https://www.schurter.com /PG05 Diagrams 1 L' P L 1) 2) PE PE' N 2 N' P 1) Line 2) Load Connectors 3 Power entry modules without line filter 6145 https://www.schurter.com /PG05 Table 1 Selection for type TA45 ABT W F 150 C0 Order example • Circuit Breaker of Equipment • 2-pole, rocker actuated • Quick connect terminal Other types on request Diagram 1-pole 2-pole Thermal overload protection P2 P1 P2 P1 3 6 43 Without illumination ABT ABD With illumination 220…240 V A12 A32 } 110…120 V A14 A34 Colours Switch front Rocker W black white – B black black – 6 black – orange transp. Rocker legend Surface Illustration Colour of print Surface Illustration Colour of print F embossed / Relief M printed black I O H printed / bedruckt white / weiss P printed white I O K printed / bedruckt black / schwarz R printed black L printed / bedruckt white / weiss Position of the rocker legend Rated current circuit breaker of equipment e.g F I Code I Code I Code I Code n n n n 10,0 100 0,1 J01 1,3 J13 2,8 J28 11,0 110 0,2 J02 1,4 J14 3,0 030 12,0 120 0,3 J03 1,5 J15 3,5 035 13,0 130 0,4 J04 1,6 J16 4,0 040 14,0 140 0,5 J05 1,7 J17 4,5 045 15,0 150 0,6 J06 1,8 J18 5,0 050 20,0 200 0,7 J07 1,9 J19 6,0 060 0,8 J08 2,0 J20 6,5 065 0,9 J09 2,1 J21 7,0 070 1,0 J10 7,5 075 2,2 J22 1,1 J11 8,0 080 2,3 J23 1,2 J12 9,0 090 2,5 J25 Without release: code C0 Undervoltage release Remote trip release P2 P1 P2 P1 P2 P1 P2 P1 c b b a U< U< U< Rated voltage U UE ZA Code n 2 240 V AC • • • • 3 230 V AC • • • • 4 120 V AC • • • • 4 Connectors l ON ON l O OFF OFF O l O Power entry modules without line filter 6145 https://www.schurter.com /PG05 Technical data (continued) Circuit breaker Tripping characteristics Tripping characteristics I < 3 A I > _ 3… < _ 15 A n n [ min ] [ sec ] [ min ] [ sec ] 10’000 10’000 Type TA45 Type TA45 Rated current In < 3 A Rated current I n > 3... < 15 A 60 60 1-pole protected 1-pole protected 2000 2’000 30 30 2-pole protected 2-pole protected 20 20 1000 1’000 Ambient temp. Ambient temp. +23 °C +23 °C 10 10 500 500 5 5 200 200 100 100 1 1 50 50 20 20 10 10 5 5 2 2 1 1 0,5 0,5 0,3 0,3 0,2 0,2 0,1 0,1 1,05 1,32 2 3 4 5 8 10 1,05 1,32 2 3 4 5 8 10 Multiple of rated current [ x I ] Multiple of rated current [ x I ] n n 1) Effect of ambient temperature * Temperature must be measured at the rear of the breaker next The unit is calibrated for an ambient temperature of +23 °C. To to the terminals after equipment operating temperature has been deter mine the rated current for a lower or higher ambient tempera- reached. ture, use a correction factor from the table below. 1) Example * Ambient temperature [°C] Correction factor Rated current at +23 °C 6,0 A –10 0,89 Ambient temperature +40 °C – 5 0,91 Correction factor 1,08 0 0,92 Chosen rated current at +23 1,00 + 40 °C ambient temperature 6 A x 1,08 = 6,5 A +30 1,03 +40 1,08 +55 1,16 Configuration code (example) Type Order code TA45 Terminal PE (2-pole rocker-switch 1 Quick-connect terminal 6.3x0.8 mm without accessories) 6145 - ABTWF150C0 - 000 - 111 - 00 Terminal N see table 1 1 Quick-connect terminals 6.3x0.8mm, without connection to TA45 4 connection to TA45 non insulated Terminal L 1 Quick-connect terminals 6.3x0.8mm, without connection to TA45 4 connection to TA45 non insulated 20 Pcs Packaging unit Accessories Description Assorted Covers Rear Cover 0859.0074 Connectors 5 Tripping time Tripping time Power entry modules without line filter 6145 https://www.schurter.com /PG05 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to 6145 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to 6145 ... Mating Outlets/Connectors shuttered Power Cord Overview complete Power cord with IEC connector C17, V-Lock, straight VAC17KS Power Cord further types to 6145 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 6 Connectors to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 07.05.2018