Connectors (Inlets/Outlets) 6015 https://www.schurter.com /PG07 IEC Appliance Inlet C18, Snap-in Mounting, Solder, Quick-connect, Screw- or PCB Terminal Snap-in version C18 See below: Approvals and Compliances 70° C Description References - Panel Mount : Alternative: protection class I version Snap-in version , Front Side Weblinks - 1 Function pdf datasheet, html-datasheet, General Product Information, Distributor- - Appliance Inlet , Pin temperature 70 °C , Protection class II Stock-Check, Accessories, Detailed request for product, Microsite - Solder, quick-connect, screw, PCB Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C18 acc. to IEC 60320-1 UL 60320-1, CSA C22.2 no. 60320-1 Ratings UL/CSA 15 A / 250 VAC; 60 Hz (for cold conditions) pin-temperature 70 Dielectric Strength > 3 kVAC between L-N °C, 10 A, Protection Class II > 1.5 kVAC between L/N-PE (1 min/50 Hz) Allowable Operation Tempe- -25 °C to 70 °C rature IP-Protection from front side IP 20 acc. to IEC 60529 Insulation cover Suitable for appliances with protection class II acc. to IEC 61140 Terminal Solder, quick-connect, screw, PCB Panel Thickness S Snap-in version 0.8/1.0/1.2/1.5/2.0/2.5/3.0/4.0 mm Material: Housing PA6, black or grey, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6015 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40011871 CSA Approvals CSA CSA Certification Record: 27324 CQC Approvals CQC CCC Certificate Number: Connectors 1 Connectors (Inlets/Outlets) 6015 https://www.schurter.com /PG07 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Dimensions [mm] Quick connect or solder terminals 31.2 E3 S 27.3 +0.20 27.5 0 max.R3 E: Quick-connect terminals 4.8x0.8 mm: 27.0 mm E: Quick-connect terminals 6.3x0.8 mm: 28.0 mm E: Solder terminals short: 22.5 mm E: Solder terminals long: 26.2 mm Dimension "S" please ref. to table order code 2 Connectors R1 24 19.5 +0.20 20 0 Connectors (Inlets/Outlets) 6015 https://www.schurter.com /PG07 Screw terminals 31.2 E3 S 24 27.3 +0.20 27.5 0 max.R3 E: Screw terminals M3.5: 28.0 mm Dimension "S" please ref. to table order code Quick-connect or solder terminals, housing for V-Lock 30.5 E 6 S 27.3 +0.20 27.5 0 E: Quick-connect terminals 4.8x0.8 mm: 23.8 mm E: Quick-connect terminals 6.3x0.8 mm: 24.8 mm E: Solder terminals short: 19.3 mm E: Solder terminals long: 23.0 mm Dimension "S" please ref. to table order code Connectors 3 R1 R3max. R1 24 23 19.5 19.5 +0.20 20 0 +0.20 20 0 Connectors (Inlets/Outlets) 6015 https://www.schurter.com /PG07 PCB terminals 31.2 19.5 3 27.3 N L S 8.85 1.3 18 17.7 17.7 +0.20 27.5 0 ±0.075 1.6 max.R3 Dimension "S" please ref. to table order code Config. Code 6015|-|H|-|A|B|C|0-|D|-|E|G|O| The characters are placeholders for the correspondingly keys of selections from the key tables. 6015|-| H |-|A|B|C|0-|D|-|E|G|O| = Type 6015|-|H|-|A| B |C|0-|D|-|E|G|O| = Terminals Type Configuration key Terminal N Configuration key protection class II X short solder terminal (L = 4.8 mm) 2 long solder terminal (L = 8.5 mm) 3 PCB-terminal standard (additional solder terminal) 4 6015|-|H|-| A |B|C|0-|D|-|E|G|O| = Terminals Blade terminal (4.8 x 0.8 mm) 8 Terminal L Configuration Blade terminal (6.3 x 0.8 mm) 9 key screw terminal A Symbols similar as in table A short solder terminal (L = 4.8 mm) 2 6015|-|H|-|A|B| C |0-|D|-|E|G|O| = Terminals long solder terminal (L = 8.5 mm) 3 Terminal Ground Configuration key without terminal 0 PCB-terminal standard (additional solder terminal) 4 Symbols similar as in table A Blade terminal (4.8 x 0.8 mm) 8 6015|-|H|-|A|B|C|0-| D |-|E|G|O| = Color Color Configuration Blade terminal (6.3 x 0.8 mm) 9 key Black A screw terminal A 4 Connectors R1 7.5 24 19.5 +0.20 20 0 18 19.5 S Connectors (Inlets/Outlets) 6015 https://www.schurter.com /PG07 Color Configuration Dimension "S" Configuration key key Grey B 12 15 20 25 6015|-|H|-|A|B|C|0-|D|-| E |G|O| = Style 30 Style Configuration 40 key 1 The dimension "S" is displayed in ( / mm). This information is also valid for the 10 snap-in (s=panel thickness) 4 order code 6015|-|H|-|A|B|C|0-|D|-|E| G |O| = Dimension S 6015|-|H|-|A|B|C|0-|D|-|E|G| O | = Features Dimension "S" Configuration Features Configuration key key 08 without V-Lock 10 V-Lock V 1 The dimension "S" is displayed in ( / mm). This information is also valid for the 10 order code All Variants Terminals L / N Color Panel Thickness s Features Config. Code Order Number [1/10 mm] short solder terminal (L = 4.8 mm) Black 15 without V-Lock 6015-X-2200-A-415 6162.0032 short solder terminal (L = 4.8 mm) Black 30 without V-Lock 6015-X-2200-A-430 6162.0033 Blade terminal (4.8 x 0.8 mm) Black 15 without V-Lock 6015-X-8800-A-415 6162.0035 Blade terminal (4.8 x 0.8 mm) Black 20 without V-Lock 6015-X-8800-A-420 6162.0036 Blade terminal (4.8 x 0.8 mm) Black 25 without V-Lock 6015-X-8800-A-425 6162.0037 Blade terminal (6.3 x 0.8 mm) Black 30 without V-Lock 6015-X-9900-A-430 6162.0039 The listet variants should be available from stock Other versions on request www.schurter.com/contact Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 50 Pcs Packaging unit Accessories Description Assorted Covers Rear Cover Connectors 5 Connectors (Inlets/Outlets) 6015 https://www.schurter.com /PG07 Mating Outlets/Connectors Category / Description Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to 6015 ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power cord with IEC connector C17, V-Lock, straight VAC17KS Power Cord further types to 6015 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed 6 Connectors to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 27.02.2018