Connectors (Inlets/Outlets) 6061 https://www.schurter.com /PG07 IEC Appliance Inlet C14/C18, Screw-on Mounting, Front Side, Solder or Quick-connect, Screw Terminal C14 C18 See below: Approvals and Compliances 70° C 70° C Description Other versions on request - Panel Mount : - Variant with notch for V-Lock mating Cordsets Screw-on mounting , Front Side - PCB terminals - 1 Function Weblinks - Appliance Inlet , Pin temperature 70 °C , protection class I or II pdf datasheet, html-datasheet, General Product Information, Distributor- - Solder, Quick Connect or Screw Terminals Stock-Check, Accessories, Detailed request for product, Microsite Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1 UL 60320-1, CSA C22.2 no. 60320-1 Ratings UL/CSA 15 A / 250 VAC; 60 Hz (for cold conditions) pin-temperature 70 Dielectric Strength > 3 kVAC between L-N °C, 10 A, Protection Class I or II > 1.5 kVAC between L/N-PE (1 min/50 Hz) Allowable Operation Tempe- -25 °C to 70 °C rature IP-Protection from front side IP 20 acc. to IEC 60529 Insulation cover Suitable for appliances with protection class I or II acc. to IEC 61140 Material: Housing PA6, black / grey / white, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6061 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40011871 UL Approvals UL UL File Number: E96454 CSA Approvals CSA CSA Certification Record: 27324 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Connectors 1 R 7 Connectors (Inlets/Outlets) 6061 https://www.schurter.com /PG07 Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. Dimensions [mm] Countersunk mounting holes, 40 mm distance, quick connect and solder terminals 50 E 5 40 max. R 4 +0.20 s= 40 27.3- 0 27 E: Quick-connect terminals 4.8x0.8 mm: 25.3 mm E: Quick-connect terminals 6.3x0.8 mm: 26.3 mm E: Solder terminals short: 21.1 mm E: Solder terminals long: 24.5 mm 2 Connectors ø 3.2 2 22.5 19.3 ø 3.5/M3 +0.20 19.5 - 0 R 5 R 6 Connectors (Inlets/Outlets) 6061 https://www.schurter.com /PG07 V-Lock version, countersunk mounting holes, 40 mm distance, quick connect and solder terminals 50 E 6 40 max. R 3 +0.20 V-Lock s= 40 27.6- 0 27.3 E: Quick-connect terminals 4.8x0.8 mm: 23.8 mm E: Quick-connect terminals 6.3x0.8 mm: 24.8 mm E: Solder terminals short: 19.6 mm E: Solder terminals long: 23.0 mm Through hole mounting holes, 40 mm distance, quick connect and solder terminals 5 50 E 40 max. R 4 +0.20 s= 40 - 0 27.3 27 E: Quick-connect terminals 4.8x0.8 mm: 26.1 mm E: Quick-connect terminals 6.3x0.8 mm: 27.1 mm E: Solder terminals short: 21.9 mm E: Solder terminals long: 25.3 mm Connectors 3 ø 3.2 ø 3.2 2 3 22.5 23 19.7 19.3 ø 3.5/M3 ø 3.5/M3 +0.20 +0.20 19.5 - 0 19.9 - 0 R 6 R 7 Connectors (Inlets/Outlets) 6061 https://www.schurter.com /PG07 Countersunk mounting holes, 36 mm distance, quick connect and solder terminals 48 E 5 36 max. R 4 +0.20 s= 36 27.3- 0 27 E: Quick-connect terminals 4.8x0.8 mm: 26.1 mm E: Quick-connect terminals 6.3x0.8 mm: 27.1 mm E: Solder terminals short: 21.9 mm E: Solder terminals long: 25.3 mm Countersunk mounting holes, 40 mm distance, screw terminals 5 50 20.3 40 max. R 4 +0.20 s= 40 - 0 27.3 27 4 Connectors ø 3.2 ø 3.2 2 2 23 22.5 19.3 19 ø 3.5/M3 ø 3.5/M3 +0.20 +0.20 19.3 - 0 19.5 - 0 R 5 Connectors (Inlets/Outlets) 6061 https://www.schurter.com /PG07 Protection class II, countersunk mounting holes, 40 mm distance, quick connect and solder terminals 50 E 6 40 max. R 3 +0.20 V-Lock s= 40 27.6- 0 27.3 E: Quick-connect terminals 4.8x0.8 mm: 23.8 mm E: Quick-connect terminals 6.3x0.8 mm: 24.8 mm E: Solder terminals short: 19.3 mm E: Solder terminals long: 23.0 mm Config. Code 6061|-|H|-|A|B|C|0-|D|-|E|G|O| The characters are placeholders for the correspondingly keys of selections from the key tables. 6061|-| H |-|A|B|C|0-|D|-|E|G|O| = Type 6061|-|H|-|A| B |C|0-|D|-|E|G|O| = Terminals Type Configuration key Terminal N Configuration key protection class II B protection class I X short solder terminal (L = 4.8 mm) 2 long solder terminal (L = 8.5 mm) 3 Protection class II only with V-Lock Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (6.3 x 0.8 mm) 9 6061|-|H|-| A |B|C|0-|D|-|E|G|O| = Terminals screw terminal A Symbols similar as in table A Terminal L Configuration key 6061|-|H|-|A|B| C |0-|D|-|E|G|O| = Terminals short solder terminal (L = 4.8 mm) 2 Terminal Ground Configuration key long solder terminal (L = 8.5 mm) 3 without terminal 0 short solder terminal (L = 4.8 mm) 2 long solder terminal (L = 8.5 mm) 3 Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (4.8 x 0.8 mm) 8 Blade terminal (6.3 x 0.8 mm) 9 screw terminal A Blade terminal (6.3 x 0.8 mm) 9 Symbols similar as in table A screw terminal A Connectors 5 ø 3.2 3 23 19.7 ø 3.5/M3 +0.20 19.9 - 0 Connectors (Inlets/Outlets) 6061 https://www.schurter.com /PG07 6061|-|H|-|A|B|C|0-| D |-|E|G|O| = Color Dimension "S" Configuration key Color Configuration key 36 Black A 40 1 Grey B The dimension "S" is displayed in ( / mm). This information is also valid for the 10 order code White D 6061|-|H|-|A|B|C|0-|D|-|E|G| O | = Features 6061|-|H|-|A|B|C|0-|D|-| E |G|O| = Style Features Configuration key Style Configuration without V-Lock key V-Lock V flange with countersunk holes 1 flange with through holes 2 V-Lock only with Dimension "X" = 40 6061|-|H|-|A|B|C|0-|D|-|E| G |O| = Dimension S All Variants Config. Code Description Order Number 6061-X-2220-A-136 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: short solder terminal (L = 4.8 mm), N: short solder terminal 6162.0045 (L = 4.8 mm), ground: short solder terminal (L = 4.8 mm), color: Black, design: flange with countersunk holes, dimension S: 36, features: 6061-X-2220-A-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: short solder terminal (L = 4.8 mm), N: short solder terminal 6162.0046 █ (L = 4.8 mm), ground: short solder terminal (L = 4.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: 6061-X-2220-A-240 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: short solder terminal (L = 4.8 mm), N: short solder terminal (L = 6162.0047 4.8 mm), ground: short solder terminal (L = 4.8 mm), color: Black, design: flange with through holes, dimension S: 40, features: 6061-X-2220-B-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: short solder terminal (L = 4.8 mm), N: short solder terminal (L = 6162.0048 4.8 mm), ground: short solder terminal (L = 4.8 mm), color: Grey, design: flange with countersunk holes, dimension S: 40, features: 6061-X-3330-A-136 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: long solder terminal (L = 8.5 mm), N: long solder terminal (L 6162.0049 = 8.5 mm), ground: long solder terminal (L = 8.5 mm), color: Black, design: flange with countersunk holes, dimension S: 36, features: 6061-X-3330-A-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: long solder terminal (L = 8.5 mm), N: long solder terminal (L 6162.0050 = 8.5 mm), ground: long solder terminal (L = 8.5 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: 6061-X-3330-B-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: long solder terminal (L = 8.5 mm), N: long solder terminal (L = 6162.0052 8.5 mm), ground: long solder terminal (L = 8.5 mm), color: Grey, design: flange with countersunk holes, dimension S: 40, features: 6061-X-8880-A-136 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: Blade terminal (4.8 x 0.8 mm), N: Blade terminal (4.8 x 0.8 mm), 6162.0054 ground: Blade terminal (4.8 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 36, features: 6061-X-8880-A-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: Blade terminal (4.8 x 0.8 mm), N: Blade terminal (4.8 x 0.8 mm), 6162.0055 ground: Blade terminal (4.8 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: 6061-X-9990-A-136 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm), 6162.0057 █ ground: Blade terminal (6.3 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 36, features: 6061-X-9990-A-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm), 6162.0058 █ ground: Blade terminal (6.3 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: 6061-X-9990-B-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm), 6162.0059 ground: Blade terminal (6.3 x 0.8 mm), color: Grey, design: flange with countersunk holes, dimension S: 40, features: 6061-X-AAA0-A-140 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: screw terminal, N: screw terminal, ground: screw terminal, co- 6162.0061 █ lor: Black, design: flange with countersunk holes, dimension S: 40, features: 6061-X-2220-A-140V 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: short solder terminal (L = 4.8 mm), N: short solder terminal 6162.0157 (L = 4.8 mm), ground: short solder terminal (L = 4.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: V-Lock 6061-X-8880-A-140V 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: Blade terminal (4.8 x 0.8 mm), N: Blade terminal (4.8 x 0.8 mm), 6162.0158 ground: Blade terminal (4.8 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: V-Lock 6061-X-9990-A-140V 6061, IEC Appliance Inlet C14, 70°C, version: protection class I, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 mm), 6162.0159 █ ground: Blade terminal (6.3 x 0.8 mm), color: Black, design: flange with countersunk holes, dimension S: 40, features: V-Lock 6061-B-9900-A-140V 6061, IEC Appliance Inlet C18, 70°C, version: protection class II, L: Blade terminal (6.3 x 0.8 mm), N: Blade terminal (6.3 x 0.8 6162.0175 mm), ground: without terminal, color: Black, design: flange with countersunk holes, dimension S: 40, features: V-Lock The listet variants should be available from stock Other versions on request www.schurter.com/contact █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 6 Connectors Connectors (Inlets/Outlets) 6061 https://www.schurter.com /PG07 Packaging unit 50 Pcs Accessories Description Assorted Covers Rear Cover Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to 6061 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to 6061 ... Mating Outlets/Connectors shuttered Power Cord Overview complete VAC13KS, Overview, diverse Connector IEC C13, cord end: VAC13KS Power cord with IEC connector C17, V-Lock, straight VAC17KS Power Cord further types to 6061 The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed Connectors 7 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 27.02.2018