Connectors (Inlets/Outlets) 5091 https://www.schurter.com /PG07 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal Flange with countersunk holes Flange with through holes special type F H See below: Approvals and Compliances 70° C 70° C Description Weblinks - Panel Mount : pdf datasheet, html-datasheet, General Product Information, Distributor- Screw-on mounting , from front side Stock-Check, Accessories, Detailed request for product - 1 Function : - Connector , Pin temperature 70 °C , protection class I or II , - Solder, Quick Connect or PCB Terminal Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz Ratings UL/CSA 15 A / 250 VAC; 60 Hz Dielectric Strength > 4 kVAC between L-N > 2 kVAC between L/N-PE (1 min/50 Hz) Allowable Operation Tempe- -25 °C to 70 °C rature IP-Protection from front side IP 20 acc. to IEC 60529 Insulation cover Suitable for appliances with protection class I or II acc. to IEC 61140 Terminal Solder, Quick Connect or PCB Terminal straight Material: Housing PA6, black or grey, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 5091 Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 40010295 UL Approvals UL UL File Number: E57445 CSA Approvals CSA CSA Certification Record: 27324 Connectors 1 ø 3.2 Connectors (Inlets/Outlets) 5091 https://www.schurter.com /PG07 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. Dimensions [mm] 45 26.1 35 +0.2 35 4 18.1 23.2 - 0 23 Flange with countersunk holes 2 Connectors 24 15.6 +0.2 15.8 - 0 ø1.5 ø3.2 Connectors (Inlets/Outlets) 5091 https://www.schurter.com /PG07 44.5 26.3 35 0.9 77 35 18.2 ø10 Flange with through holes special type Config. Code 5091|-|H|-|A|B|C|0-|D|-|E|O| The characters are placeholders for the correspondingly keys of selections from the key tables. Terminal Ground Configuration 5091|-| H |-|A|B|C|0-|D|-|E|O| = Type key Type Configuration without terminal 0 key solder terminal 1 protection class II B PCB-terminal standard (additional solder terminal) 4 protection class I X Blade terminal (6.3 x 0.8 mm) 9 Symbols similar as in table A 5091|-|H|-| A |B|C|0-|D|-|E|O| = Terminals 5091|-|H|-|A|B|C|0-| D |-|E|O| = Color Terminal L Configuration Color Configuration key key Black A solder terminal 1 Grey B PCB-terminal standard (additional solder terminal) 4 5091|-|H|-|A|B|C|0-|D|-| E |O| = Style Blade terminal (6.3 x 0.8 mm) 9 Style Configuration key flange with countersunk holes 1 flange with through holes 2 5091|-|H|-|A| B |C|0-|D|-|E|O| = Terminals flange with through holes (special type) 7 Terminal N Configuration key 5091|-|H|-|A|B|C|0-|D|-|E| O | = Features solder terminal 1 PCB-terminal standard (additional solder terminal) 4 Features Configuration Blade terminal (6.3 x 0.8 mm) 9 key Symbols similar as in table A not used 0 dead cover 1 holder for 1 fuse (text legible, when inlet on top) 2 5091|-|H|-|A|B| C |0-|D|-|E|O| = Terminals holder for 1 fuse (text legible, when inlet on bottom) 3 holder for 1 or 2 fuses (text legible, when inlet on top) 4 Connectors 3 24 5.6 4 Connectors (Inlets/Outlets) 5091 https://www.schurter.com /PG07 Features Configuration Features Configuration key key holder for 1 or 2 fuses (text legible, when inlet on bottom) 5 thermal circuit breaker for rated current 8A C voltage selector with 1 fuse 6 thermal circuit breaker for rated current 10A D voltage selector with 2 fuses 7 thermal circuit breaker for rated current 15A E thermal circuit breaker for rated current 4A A thermal circuit breaker for rated current 20A F thermal circuit breaker for rated current 6A B All Variants Type Terminals L / N Terminal Ground Color Style Features Config. Code Order Number protection class I solder terminal solder terminal Grey flange with countersunk holes - 5091-X-1110-B-1 6182.0002 protection class I PCB-terminal stan- PCB-terminal stan- Black flange with through holes - 5091-X-4440-A-7 6182.0004 dard (additional dard (additional (special type) solder terminal) solder terminal) protection class I PCB-terminal stan- PCB-terminal stan- Grey flange with through holes - 5091-X-4440-B-7 6182.0005 dard (additional dard (additional (special type) solder terminal) solder terminal) protection class I Blade terminal (6.3 Blade terminal (6.3 Black flange with countersunk holes - 5091-X-9990-A-1 6182.0006 █ x 0.8 mm) x 0.8 mm) protection class I Blade terminal (6.3 Blade terminal (6.3 Grey flange with countersunk holes - 5091-X-9990-B-1 6182.0008 x 0.8 mm) x 0.8 mm) The listet variants should be available from stock Other versions on request www.schurter.com/contact █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER Packaging unit 100 Pcs Mating Inlets/Plugs Category / Description Appliance Inlet Overview complete 6100-3, Mounting: Screw, Solder terminals or quick connect terminals, Appliance Inlet: IEC C14 6100-3 6100-4, Mounting: Snap-in, Solder terminals or quick connect terminals, Appliance Inlet: IEC C14 6100-4 G-Stecker, Mounting: Appliance Inlet : IEC C14 Without fuse holder 6150 6010, Mounting: Snap-in, Solder, quick-connect, screw, PCB, Appliance Inlet: IEC C14 6010 0711, Mounting: Snap-in, 0.8 mm, Solder, Appliance Inlet: IEC C14 0711 Appliance Inlet further types to 5091 ... Distribution Unit Overview complete Distribution Unit for Snap-in Mounting with 1 IEC Appliance Inlet C14 and 1 Appliance Outlet F 0712 Distribution Unit with 1 IEC Appliance Inlet C14 and 2 Appliance Outlets F, Shuttered 4741 Distribution Unit with 1 IEC Appliance Inlet C14 and 4 Appliance Outlets F 4747 Distribution Unit with 1 IEC Appliance Inlet C14 or Power Cord, 4, 5 or 6 IEC Appliance Outlets F and Extra Components 4740 EMC Power Strip with Line Filter FLBB Distribution Unit further types to 5091 IEC Inlet Filter Overview complete GRF2, Mounting: Rear Side, With EMC-shield and without line filter, 10 A, Plug Connector, Appliance Inlet: IEC C14, GRF2 Suitable for appliances with protection class I 5110, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Without fuse holder: 10 A, Thermoplastic 5110 Appliance Inlet: IEC C14, prewired, Suitable for appliances with protection class I KFS, Mounting: Screw, Front Side, Filter: Standard Version, Without fuse holder: 10 A, Appliance Inlet: IEC C14, pre- KFS wired IEC Inlet Filter further types to 5091 4 Connectors Connectors (Inlets/Outlets) 5091 https://www.schurter.com /PG07 Category / Description Power Entry Module Overview complete DD11, Mounting: Screw-on mounting, Rocker switch: non-illuminated or illuminated 2-pole, Quick connect terminals 4.8 x 0.8 mm, Appliance Inlet: IEC C14, With or without protection cover, Fuse holder: 1 or 2 pole, Suitable for appli- DD11 ances with protection class I DD21, Mounting: Screw-on mounting Rear Side, Rocker switch: non-illuminated or illuminated 2-pole, additional quick DD21 connect 4.8 x 0.8 mm Appliance Inlet: IEC C14, Fuse holder: 1 or 2 pole DC11, Mounting: Screw, Rocker switch: non-illuminated or illuminated 1 or 2 pole, Quick connect terminals 4.8 x 0.8 DC11 mm, Appliance Inlet: IEC C14, Without fuse holder: Suitable for appliances with protection class I or II KEB1, Mounting:Screw, Quick connect terminals 4.8 x 0.8 mm, Without fuse holder: Rocker switch, non-illuminated or KEB1 illuminated, red, 1-pole, Appliance Inlet: IEC C14, 250 VAC, prewired, Suitable for appliances with protection class I KEB2, Mounting:Screw, Quick connect terminals 4.8 x 0.8 mm, Without fuse holder: Rocker switch, non-illuminated or KEB2 illuminated, 2-pole, Appliance Inlet: IEC C14, 250 VAC, prewired, Suitable for appliances with protection class I Power Entry Module further types to 5091 ... Power Entry Module with line filter Overview complete DD14, Mounting: Screw-on mounting, Front Side, Filter, Standard and Medical Version, Fuse holder:1 or 2 pole, 10 A, DD14 Rocker switch: 2-pole, non-illuminated Appliance Inlet: IEC C14, prewired KFB1, Mounting: Screw, Front Side, Filter: Standard Version, Without fuse holder: 10 A, Rocker switch: 1-pole, Appli- KFB1 ance Inlet: IEC C14, prewired KFB2, Mounting: Screw, Front Side, Filter: Standard and Medical Version, Without fuse holder: 10 A, Rocker switch: KFB2 2-pole, Appliance Inlet: IEC C14, prewired DC12, Mounting: Screw, Front-/Rear-Side, Filter, Standard and Medical Version, Without fuse holder:10 A, Rocker DC12 switch: 1 or 2 pole, non-illuminated or illuminated Appliance Inlet: IEC C14, prewired DC22 Mounting: Screw, Rear Side, PCB, 10 A, Filter: Standard and Medical Version, Without fuse holder: Rocker switch: DC22 1 or 2 pole, non-illuminated or illuminated, Appliance Inlet: IEC C14, Suitable for appliances with protection class I Power Entry Module with line filter further types to 5091 ... The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed Connectors 5 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 27.02.2018