Power entry modules without line filter 6200 https://www.schurter.com /PG05 IEC Appliance Inlet C14 with Fuseholder 1-pole, wired Screw-on Version Snap-in version C14 Approvals and Compliances 70° C Description Characteristics - Panel Mount : - All single elements are already wired Screw-on version from front or rear side, snap-in version from front - Plug removal necessary for fuse-link replacement - Suitable for use in equipment according to IEC/UL 60950 side - Appliance Inlet Protection class I , Fuseholder for fuse-links 5 x 20 mm Other versions on request 1-pole - Types for rivet mounting available upon request - V-Lock notch standard References - Meets the requirements of IEC 60335-1 for appliances in unattended Alternative: version with line filter 5200 use. This includes the enhanced requirements of glow wire tests acc. Alternative: Fuseholder 2-pole 6220 to IEC 60695-2-12 and -13. Weblinks - Solder terminals or quick connect terminals pdf datasheet, html-datasheet, General Product Information, Distributor- Stock-Check, Accessories, Detailed request for product, Microsite Technical Data Ratings IEC 10 A / 250 VAC; 50 Hz appliance inlet/-outlet C14 acc. to IEC 60320-1, UL 498, CSA C22.2 no. 42 (for cold Ratings UL/CSA 10 A / 250 VAC; 60 Hz conditions) pin-temperature 70 °C, 10 A, Dielectric Strength > 2 kVAC between L-N Protection Class I > 2 kVAC between L/N-PE Fuseholder 1-pole, Shocksafe category PC2 acc. to (1 min/50 Hz) IEC 60127-6, Allowable Operation Tempe- -25 °C to 70 °C for fuse-links 5 x 20 mm rature Rated Power Acceptance @ 5 x 20: 2 W (1 pole) IP-Protection from front side IP 40 acc. to IEC 60529 Ta 23 °C Insulation cover Suitable for appliances with protection Power Acceptance @ Ta > Admissible power acceptance at higher class I acc. to IEC 61140 23°C ambient temperature see derating cur- Terminal Solder terminals or quick connect termi- ves nals , tin-plated Panel Thickness S Screw: max 6 mm Mounting screw torque max 0.5 Nm Snap-in: 1/1.5/2/2.5/3 mm Material: Housing Thermoplastic, black, UL 94V-0 Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Connectors 1 Power entry modules without line filter 6200 https://www.schurter.com /PG05 Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: 6200 Approval Logo Certificates Certification Body Description VDE Approvals VDE Certificate Number: 40036853 UL Approvals UL UL File Number: E93617 CSA Approvals CSA CSA Certification Record: 38456 CQC Approvals CQC CCC File Number: 2013010204594655 Product standards Product standards that are referenced Organization Design Standard Description Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to IEC 61058-1 Switches for appliances. Part 1. General requirements Designed according to UL 498 Standard for Attachment Plugs and Receptacles Designed according to CSA C22.2 no. 42 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices Application standards Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technologyequipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the en- hanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The connector is equipped with a notch intended for use with the latching cordset. The cord latching system prevents against accidental removal of the cordset. 2 Connectors Power entry modules without line filter 6200 https://www.schurter.com /PG05 Dimensions [mm] Screw-on mounting 6.3x90° ±0.1 36 3.5 2.5 M3 +0.05 +0.2 - 0.10 27.4 E 5 max. R3 27.5 0 36 44 E: Solder terminals 20.5 mm E: Quick connect terminals 23.5 mm Snap-in mounting ±0.1 S +0.2 30 E 3 max. R3 27.5 0 E: solder terminals 22.5 mm E: quick-connect terminals 25.5 mm S: 1.0/1.5/2.0/2.5/3.0 mm Diagrams L N L E Connectors 3 ±0.1 34 30.8 34 +0.2 31.5 0 +0.2 0 31.5 Power entry modules without line filter 6200 https://www.schurter.com /PG05 Derating Curves 1-pole 2.0 1.5 I = 1.0 I n I = 0.7 I n 1.0 I = << I n 0.5 0.0 020406080 100 Ambient air temperature T °C a All Variants Protection Class Panel mounting Panel Thickness Fuseholder Terminal Internally wired Order Number s [mm] I Snap-in 1 1-pole Quick connect terminals 4.8 x 0.8 mm l 6200.4210 █ I Snap-in 1.5 1-pole Quick connect terminals 4.8 x 0.8 mm l 6200.4215 █ I Snap-in 2 1-pole Quick connect terminals 4.8 x 0.8 mm l 6200.4220 █ █ I Snap-in 2.5 1-pole Quick connect terminals 4.8 x 0.8 mm l 6200.4225 I Snap-in 3 1-pole Quick connect terminals 4.8 x 0.8 mm l 6200.4230 I Snap-in 1 1-pole Quick connect terminals 6.3 x 0.8 mm l 6200.4310 █ I Snap-in 1.5 1-pole Quick connect terminals 6.3 x 0.8 mm l 6200.4315 █ █ I Snap-in 2 1-pole Quick connect terminals 6.3 x 0.8 mm l 6200.4320 I Snap-in 2.5 1-pole Quick connect terminals 6.3 x 0.8 mm l 6200.4325 █ I Snap-in 3 1-pole Quick connect terminals 6.3 x 0.8 mm l 6200.4330 I Snap-in 1 1-pole Solder terminals 3.8 x 0.8 mm l 6200.4110 █ █ I Snap-in 1.5 1-pole Solder terminals 3.8 x 0.8 mm l 6200.4115 I Snap-in 2 1-pole Solder terminals 3.8 x 0.8 mm l 6200.4120 █ I Snap-in 2.5 1-pole Solder terminals 3.8 x 0.8 mm l 6200.4125 I Snap-in 3 1-pole Solder terminals 3.8 x 0.8 mm l 6200.4130 █ I Screw - 1-pole Quick connect terminals 4.8 x 0.8 mm l 6200.2200 l █ I Screw - 1-pole Quick connect terminals 6.3 x 0.8 mm 6200.2300 I Screw - 1-pole Solder terminals 3.8 x 0.8 mm l 6200.2100 █ █ Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 50 Pcs Packaging unit 4 Connectors Admissible power acceptance in Watt Power entry modules without line filter 6200 https://www.schurter.com /PG05 Accessories Description Assorted Covers Rear Cover 0859.0047 4311.9403 Cord retaining kits Cord retaining strain relief Flat head, A 4700.0001 Countersunk, B 4700.0002 Mating Outlets/Connectors Category / Description Appliance Outlet Overview complete IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder Terminal 4787 IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal 4788 IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal 5091 Appliance Outlet further types to 6200 Connector Overview complete 4782 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4782 4022 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4022 4785 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4785 4300-06 Mounting: Power Cord, 3 x 1 mm² / 3 x 18 AWG, Cable, Connector: IEC C13 4300-06 4012 Mounting: Power Supply Cord, 3 x 1.5 mm², Screw clamps, Connector: IEC C13 4012 Connector further types to 6200 ... The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed Connectors 5 to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. 01.12.2017